TOMORROWS TRANSPORTATION NEWS TODAY!

Category: Military News (Page 27 of 28)

Successful Launch of Second SpaceDataHighway Satellite

The EDRS-C satellite, the second node of the SpaceDataHighway network (also known as EDRS, European Data Relay System), has been successfully launched into geostationary orbit at 31° East by an Ariane 5 rocket from Kourou, French Guiana. After a test period, it will double transmission capacity of the system in order to serve two observation satellites simultaneously and provide redundant back-up for the SpaceDataHighway.

This second satellite is joining EDRS-A which transmits on a daily basis the images of Earth acquired by the Copernicus programme’s four Sentinel observation satellites. Since it entered service in late 2016, it has achieved more than 20,000 laser connections. The reliability rate has reached 99.5%, and these successful connections have downloaded more than 1 petabyte of data. Full operations including EDRS-C are expected by the end of 2019, when its inter-satellite link and end-to-end service will be tested and commissioned with the Sentinel satellites.

The SpaceDataHighway is the world’s first ‘optical fibre’ network in the sky based on cutting-edge laser technology. It is a unique network of geostationary satellites permanently fixed over a network of ground stations that can transmit data at a rate of 1.8 Gbit/s. It will be a key component of the Airbus Network for the Sky (NFTS) programme. NFTS combines various technologies – satellite and ground communications, air-to-ground, ground-to-air and air-to-air tactical links, 5G mobile communications and laser connections – in a resilient, unified, secure, highly interoperable, mesh network for aircraft, UAVs and helicopters.

SpaceDataHighway satellites can connect to low-orbiting observation satellites at a distance up to 45000 km, intelligence UAVs or mission aircraft via laser. From its position in geostationary orbit, the SpaceDataHighway system relays data collected by observation satellites to Earth in near-real-time, a process that would normally take around 90 minutes. It thus enables the quantity of image and video data transmitted by observation satellites to be tripled and their mission plan to be reprogrammed at any time and in just a few minutes.

“The SpaceDataHighway makes our data connections more secure, more stable, more reliable, with more bandwidth and in near real time.  The launch of our second satellite is just the start, laser communication will be a revolution for many industries,” said Evert Dudok, Head of Communications, Intelligence & Security at Airbus Defence and Space.

A third communication node is to be positioned over the Asia-Pacific region by around 2024. Equipped with three laser terminals, EDRS-D will significantly increase the system’s communication capacity and considerably expand its coverage.

From 2021, the Pleiades Neo Earth observation satellites will begin to use the SpaceDataHighway. By the end of 2019, the system will also provide a fully European broadband communication service to the Columbus module of the International Space Station (ISS).

The SpaceDataHighway is a public–private partnership between the European Space Agency (ESA) and Airbus, with the laser terminals developed by Tesat-Spacecom and the DLR German Space Administration. Airbus owns, operates and provides commercial services for the SpaceDataHighway. The EDRS-C satellite platform supplied by OHB System AG is also carrying a payload for Avanti Communications.

Sikorsky S-92A Certified For Expanded Brazil Operations

TRUMBULL, Conn., Aug. 12, 2019 – Brazil’s National Civil Aviation Agency-Brazil (ANAC) approved the Search and Rescue (SAR) configuration for the Sikorsky S-92A™ helicopter. The certification now enables the operation of S-92® helicopters in Brazil in all production configurations, including offshore oil and gas transportation, search and rescue, as well as regional airline passenger service and VIP transportation. Sikorsky is a Lockheed Martin company (NYSE: LMT).

ANAC-Brazil certified the S-92A aircraft for SAR missions on March 28, following previous verification to 27,700 lbs. Maximum Gross Weight (MGW) load allowance in Dec. 2018, as well as certification of Sikorsky’s Rig Approach™ software auto-pilot feature in Oct. 2014, expanding the full range of capabilities of the S-92A helicopter manufactured by Sikorsky to Brazil.

“For more than 47 years, Sikorsky helicopters have been the workhorses of the Brazilian offshore oil transport market, first with the S-58T in 1972, the S-76® and S-61 since 1979, and over the last 10 years with the larger, further-reaching S-92 heavy aircraft. These new certifications along with the announcement of the forthcoming S-92 A+/B™, help ensure that that the S-92 will continue to be the aircraft of choice in Brazil and around the world for safe, reliable, deep water offshore oil exploration,” said Adam Schierholz, Sikorsky Regional Executive for Latin America.

The S-92 was certified in Colombia in Nov. 2016 and in Mexico in Nov. 2017. In 2018, Sikorsky added an S-92 blade repair capability in Brazil and relocated and expanded its Brazil-based Forward Stocking Location, near Brazilian operators, including Lider Aviation, Omni Helicopters International and CHC Helicopter. Eight Brazilian commercial operators currently fly a total of 90 Sikorsky aircraft throughout the country.

Sikorsky has delivered nearly 300 S-92 helicopters since 2004. With a best-in-class safety record and industry-leading dispatch availability, the multi-mission S-92 aircraft is the preferred aircraft of its size class for offshore oil worker transportation. These helicopters also perform search and rescue missions, head of state missions, and a variety of transportation missions for utility and airline passengers.

For more information, visit Sikorsky Commercial Systems & Services

About Lockheed Martin

Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.

President and CEO Hakan Buskhe to Leave Saab in 2020

Håkan Buskhe has informed Saab’s Board of Directors that he is leaving the position of President and CEO. The Board will now begin the recruitment of a successor.

Håkan Buskhe has according to his contract a six-month notice period and will continue in his current role for the time being, but will leave Saab by February 2020. The exact date will be determined by the recruitment process that Saab’s Board now is initiating.

“With his great commitment and several strategically important decisions, Håkan Buskhe has laid a strong foundation for the continued positive progress of Saab. The development of Gripen E, Saab’s part in the US T-X project and a sharp increase in capability within the important sensor technological area with i.a. GlobalEye, are some examples of this. Under Håkan Buskhe’s leadership, Saab has also expanded internationally and started collaborations with a number of other leading defence industries. All in all, this means that Saab stands on a solid foundation, which is necessary with the extremely rapid technological developments that affect all industries,” says Marcus Wallenberg, Chairman of the Board.

Håkan Buskhe assumed the role of President and CEO of Saab on September 1, 2010. Håkan Buskhe is 55 years old.

“Saab has grown to a new level and is today a strong international defence and security company. We have achieved this through strategic partnerships, global presence and a continuous focus on investments in the product portfolio. It has been fantastic to lead this work”, says Saab’s President and CEO Håkan Buskhe.

“The reason I choose to leave Saab is that I would like to face another operational challenge in my career. Until a new CEO is in place, I will continue to have full focus on Saab to ensure a smooth arrival for my successor, with the priorities being the implementation of the major projects together with our customers and the continued work to achieve Saab’s financial goals”, concludes Saab’s President and CEO Håkan Buskhe.

Textron Reviewing Strategic Alternatives for Kautex

PROVIDENCE, R.I.–(BUSINESS WIRE)– Textron Inc. (NYSE: TXT) today announced that it is reviewing strategic alternatives for its Kautex business unit, which produces fuel systems and other functional components. Textron plans to consider a range of options, including a sale, tax-free spin-off or other transaction. Kautex operates over 30 plants in 14 countries and generated over $2.3 billion in revenue in 2018.

Kautex, headquartered in Bonn, Germany, is a leading developer and manufacturer of blow-molded plastic fuel systems and advanced fuel systems for cars and light trucks, including pressurized fuel tanks for hybrid applications. The unit also develops and manufactures camera/sensor cleaning solutions for automobiles, selective catalytic reduction systems used to reduce emissions from diesel engines as well as produces cast iron engine camshafts, crankshafts and other engine components.

“Kautex is a leading Tier One supplier to global OEMs. It has a long history of product innovation, world-class operations and strong financial performance,” said Scott C. Donnelly, Textron Chairman and Chief Executive Officer. “We are exploring strategic alternatives to see how we can position Kautex to best serve its customers for ongoing success while simultaneously unlocking potential value for our shareholders.”

No decision has been made and there can be no assurance that the process will result in any transaction being announced or completed in the future. The Company has not set a definitive timetable for completion of its review of strategic alternatives and does not intend to make any further announcements related to its review unless and until its Board of Directors has approved a specific transaction or the Company otherwise determines that further disclosure is appropriate.

Textron has retained Goldman Sachs & Co. LLC as financial advisor to assist in its review.

About Textron Inc.

Textron Inc. is a multi-industry company that leverages its global network of aircraft, defense, industrial and finance businesses to provide customers with innovative solutions and services. Textron is known around the world for its powerful brands such as Bell, Cessna, Beechcraft, Hawker, Jacobsen, Kautex, Lycoming, E-Z-GO, Arctic Cat, Textron Systems, and TRU Simulation + Training. For more information visit: www.textron.com

U.S. Navy Commissions Littoral Combat Ship USS Billings

KEY WEST, Fla., Aug. 3, 2019- The U.S. Navy commissioned USS Billings (LCS 15) – the nation’s eighth Freedom-variant Littoral Combat Ship (LCS) – in Key West, Florida. This milestone places the ship, built by the Lockheed Martin (NYSE: LMT) -led team into active service. 

“Billings was designed to operate and adapt to a rapidly changing environment,” said Joe DePietro, vice president of Small Combatants and Ship Systems at Lockheed Martin. “She is equipped and ready for today’s threats and easily modifiable to meet the threats we may not even be aware of yet. Our team is confident Billings will be what the Navy needs when the fleet needs it.”

Unique among combat ships, LCS is designed to complete close-to-shore missions and is a growing and relevant part of the Navy’s fleet. 

  • It is fast — capable of speeds in excess of 40 knots. 
  • It is automated — with the most efficient staffing of any combat ship. 
  • It is lethal — standard equipped with Rolling Airframe Missiles (RAM) and a Mark 110 gun, capable of firing 220 rounds per minute. 
  • It is flexible — with 40 percent of the hull easily reconfigurable, integrating capabilities like the Longbow Hellfire Missiles, 30mm guns, and manned and unmanned vehicles targeted to meet today’s and tomorrow’s missions. 

“Having now commanded two freedom class LCS variants, I would like to report that these ships are truly impressive and will fit well in the niche they have been designed for,” said LCS 15’s Commanding Officer, Commander Nathan Rowan. “They are fast, maneuverable, and their weapon systems are some of the most accurate I’ve witnessed on any platform of which I’ve previously served.”

There are seven ships in various stages of production and test at Fincantieri Marinette Marine in Wisconsin, where the Freedom-variant LCS is built. The next Freedom-variant in the class is LCS 17, the future USS Indianapolis, which was delivered in late July. 

“On behalf of the proud 2,000 men and women who transform flat steel into a fast, agile surface combatant,” said Jan Allman, CEO of Fincantieri Marinette Marine, “we are honored to support the U.S. Navy, and we congratulate the outstanding crew of the USS Billings.”

Multimedia assets are available here: 

For more information, visit www.lockheedmartin.com/lcs

Boeing Opens New Nest for the Osprey

  • Boeing opens state-of-the-art V-22 production facility

Boeing, the U.S. Marine Corps and U.S. Navy celebrated the opening of a modern V-22 Osprey factory outside Philadelphia. Here, employees will build fuselages for the tiltrotor aircraft and modernize the MV-22 fleet for Marines.

The advanced factory will house fuselage production for Navy, Air Force, Marines and international customers. The new facility will also be home to the Common Configuration–Readiness Modernization (CC-RAM) program that standardizes and upgrades previously built aircraft to the new Block C configuration.

“The V-22 readiness program is our number one priority,” said U.S. Marine Corps Col. Matthew Kelly, V-22 Joint Program Manager. “The CC-RAM program is key in meeting our readiness goals and returning capable and reliable aircraft to Marine units around the world.”

The production facility will improve safety, productivity, lower operating costs and reduce Boeing’s environmental impact.

Click the link to view the official Boeing video post! http://www.boeing.com/features/2019/08/V22-Osprey-factory-08-19.page

Lockheed Awarded $1.48 Billion Saudi Missile Defense Contract

WASHINGTON, July 19 (Reuters) – Lockheed Martin was awarded a $1.48 billion contract to build the THAAD missile defense system for Saudi Arabia, bringing the total value of the deal to $5.36 billion, the Pentagon said on Friday.

The new contract was a modification to a previously awarded agreement to produce the Terminal High Altitude Area Defense interceptor for Saudi Arabia, the Pentagon said.

In November 2018, Saudi and U.S. officials signed letters of offer and acceptance formalizing terms for Saudi Arabia’s purchase of 44 THAAD launchers, missiles and related equipment.

In April Lockheed was awarded a $2.4 billion contract for THAAD interceptor missiles, some of which are slated to be delivered to the Kingdom of Saudi Arabia.

The latest contract is for interceptor support items.

Lockheed Martin, the biggest U.S. arms maker, builds and integrates the THAAD system, which is designed to shoot down short-, medium- and intermediate-range ballistic missiles. Raytheon, another U.S. firm, builds its advanced radar.

(Reporting by David Alexander Editing by Tom Brown)

BAE Wins $45 Million Extended Range Cannon Contract

The U.S. Army has awarded BAE Systems a $45 million contract for the Extended Range Cannon Artillery (ERCA) Increment 1 prototype with the purpose of increasing the range and rate of fire on current and future M109A7 self-propelled howitzers.

The development of ERCA is in collaboration with the Army’s Combat Capabilities Development Command (CCDC) Armaments Center.

This prototype phase will address capability gaps in the Army’s indirect fire systems and improve the rate and range of fire with the development of power distribution software and hardware integration solutions. ERCA will be integrated onto the M109A7 and will require the M109A7’s current 39-caliber turret to be replaced with a 58-caliber, 30-foot long gun barrel with the objective of creating firepower double the current range.

“ERCA is a significant technological step forward for the Army’s artillery portfolio,” said Scott Davis, vice president or programs, BAE Systems’ Combat Vehicles business. “We were selected based on our years of experience in the development of self-propelled howitzer systems. Long-range precision fire is a top priority for the Army, and we are pleased to be a partner in efforts to equip soldiers with the latest technology.”

The development program aims to provide the warfighter with extended range while maintaining the weight found in current systems to minimize performance impacts on the chassis. Under separate contracts, BAE Systems is also developing precision guidance kits with anti-jamming capabilities (PGK-AJ) that can operate in the challenging ERCA firing environment. PGK-AJ is compatible with existing and new long-range rounds for multiple firing platforms, including the M109 self-propelled howitzer.

BAE Systems is currently producing the M109A7 configuration for the Army in the low-rate initial production phase.

Development work on ERCA Self Propelled Howitzer will take place at the Army’s Picatinny Arsenal and BAE Systems’ facilities in York, Pennsylvania; Sterling Heights, Michigan and Minneapolis, Minnesota.

David Schacher Photography LLC

F-35 Lightning II Sustainment Work Comes to Milwaukee

President Donald J. Trump visited Derco, which maintains one of the largest and most diversified aircraft spares inventories of over 75,000 unique parts, ensuring customers have the parts available to keep their aircraft flying. Photo by: Todd McQueen, Lockheed Martin

MILWAUKEE, July 12, 2019 /PRNewswire/ — During a visit to Derco, a Lockheed Martin company (NYSE: LMT), President Donald J. Trump announced more work is coming to Milwaukee. Derco will provide parts warehousing and distribution sustainment for the F-35 Lightning II, supporting the U.S. Air Force, Marine Corps, Navy and allies around the world.

“From here in Milwaukee, you are supporting magnificent aircraft, and soon you’ll support the unstoppable, stealth F-35 Lightning II,” said President Trump. “I am thrilled to be back in the great state of Wisconsin with the extraordinary men and women of Derco. We are here today to celebrate the triumphant return of American manufacturing, and everything we are doing to keep the assembly lines rolling.”

Derco is growing its workforce by 15 percent by the end of the year. Because of its culture and skilled workforce, Derco has been named one of the Top Workplaces in Milwaukee for the past four years. Approximately 20 percent of Derco employees are veterans.

Derco initially will support the management and delivery of 1,500 different F-35 parts to locations around the globe. This increased work will create more skilled jobs for repair technicians, operations personnel and supply chain management experts.

The F-35 is the most advanced, survivable and connected fighter jet. The United States’ program of record is for 2,456 aircraft, and Lockheed Martin is set to deliver 1,000 more to allied nations.

To support the growing business, Derco is investing in its facility and is breaking ground to expand the campus. Derco is also looking to add to its 1,200 suppliers to develop repair capabilities for the F-35 in Milwaukee. Currently, the F-35 provides $1.2 million in economic impact across the supply chain in Wisconsin.

Photos of President’s Trump visit to Derco: https://www.smugmug.com/gallery/n-NPRRqk/

For additional information, visit our websites: www.f35.com and www.lockheedmartin.com/derco

U.S. Air Force F-35A Lightning II Joint Strike Fighters from the 58th Fighter Squadron, 33rd Fighter Wing, Eglin AFB, Fla. perform an aerial refueling mission with a KC-135 Stratotanker from the 336th Air Refueling Squadron from March ARB, Calif., May 14, 2013 off the coast of Northwest Florida. The 33rd Fighter Wing is a joint graduate flying and maintenance training wing that trains Air Force, Marine, Navy and international partner operators and maintainers of the F-35 Lightning II. (U.S. Air Force photo by Master Sgt. Donald R. Allen/Released)

MD-450 Ouragan, First Exported French Production Jet Fighter

4 MD 450 Ouragan patrol of fighter training center

The jet engine is one of the new operational technologies developed during the Second World War. As soon as he returned from Buchenwald, Marcel Dassault launched his teams on this path.

The MD-450 Ouragan flew 70 years ago on February 28, 1949. It was the first French jet fighter aircraft to be built in series production after the Second World War. Thanks to him, Dassault was able to test and analyze the aerodynamic and flight quality problems posed by air compressibility.

Watch Luc Berger, the Company’s historian, presenting the history of the MD-450 Ouragan, on our WebTV.

lick the link to watch the video! https://www.dassault-aviation.tv/en/theme_0/1852/Ouragan__2019_Paris_Air_Show.html

« Older posts Newer posts »