Category: Light Rail News (Page 11 of 12)

Alstom to Construct the New Metro for the Métropole Aix-Marseille-Provence

November 27, 2019 / WIL BALDWIN

Alstom is to carry out the renewal and automation of Marseille metro for the sum of 430 million euros financed by Métropole Aix-Marseille-Provence. As part of this contract, Alstom will develop, supply and install the operating system and equipment for the automatic operation of the network’s two lines. Alstom will also commission 38 new rubber-tyred metros (4 cars) and modernise all the audiovisual passenger information inside the stations. The new trains are scheduled to enter service in early 2024.

The trains will run in semi-automatic mode with drivers until mid-2025 on line M2 and until 2026 on line M1, before switching to full automation.

“It is a great honour for us to contribute to modernising the mobility offer of Métropole Aix-Marseille-Provence. Our metro experts are already at work on several of our French sites to get started quickly with developments,” says Jean-Baptiste Eyméoud, Senior Vice-President France at Alstom.

The new trains, based on Alstom’s rubber-tyred metro solutions, will incorporate the latest technological developments to increase comfort, availability, accessibility and passenger information, as well as facilitate maintenance.

Each 4-car train, 65 metres long and in “boa”[1] configuration, will be able to carry up to 500 passengers[2]. The sleekly designed trains will feature large bay windows, a highly efficient air conditioning system and modern passenger information systems, providing a pleasant on-board experience. Alstom called on Marseille designers Ora-ïto and Fabien Bourdier for the design and the sound conception of the new trains.

Three designs were proposed to the Metropole Aix-Marseille-Provence, which chose to set up an Internet consultation to give residents the opportunity to give their opinion on the design they would like to see selected.

The new metros for Marseille are environmentally friendly and will be eco-designed, enabling them to be 96% recoverable at the end of their lifespan. They will consume 25% less energy than the metros currently in service, thanks in particular to electric braking (up to 0 km/h), LED lighting and other optimisations.

For the automation system, Alstom will provide its Urbalis 400 solution, already deployed on more than 1,500 kilometres of metro lines worldwide. The Marseille metro will benefit from a proven, continuously improved system (on-board computers equipped with the latest technology, vital computers that are over 99% available, beacon tracker, etc.).

Alstom currently equips 25% of the CBTC[3] metro automations in service (60 lines, including 28 fully automated lines).

In total, more than 400 people in France will work on this project, including more than 60 in Métropole Aix-Marseille-Provence. Jobs will also be generated at our suppliers in France, but also in the Métropole for the installation and deployment of the signalling system.

Alstom will draw on the excellent skills of six of its French sites: Aix-en-Provence for the project management, Valenciennes for the design, interior layout, assembly, tests and validation of the trains, Ornans for the engines, Le Creusot for the bogies, Villeurbanne for the on-board electronics, passenger information, predictive maintenance and signalling system equipment, and Saint-Ouen for the coordination of the artistic design, development and integration of the signalling system.

Alstom Provides its Series 100 Renewed Cars to Line E of Buenos Aires City Metro

November 26, 2019 / WIL BALDWIN

Alstom will provide new cars for service to the enlarged Line E of Buenos Aires City metro, which represent a notable improvement for the metro cars of this line and an increase in passengers comfort.

The modernized cars of the series 100 produced by Alstom are incorporated into this line in which around more than 100,000 passengers travel per day, from the Plaza de los Virreyes station to Retiro in the centre of Buenos Aires. This modernization is in addition to the installation and validation of the signalling system in the three new stations of the E Line, completed successfully at the beginning of June.

Those metro cars are subject to a general review after 15 years to ensure their safety and efficiency. This “half-life” maintenance includes the disassembly, polishing, cleaning, profiling and painting or absolute replacement of all cars pieces and parts that are sent to Los Hornos workshop, in Las Plata. In that, full repair and maintenance’s are done by fifty professionals and workers, mostly from the same city, who works daily in the renovation of the cars that are part of the Buenos Aires metro network.

“The modernization of these series 100 cars for Line E is another proof of the enormous efforts that Alstom makes daily in its factory of Los Hornos to improve the travel´s quality of the thousands of users of the Buenos Aires city metro. To this we must add the activities that we have carried out recently in the expansion of Line E, with the incorporation of our state-of-the-art signalling system. We are proud of our customer’s trust in our experience, and we continue to bet on transforming the Argentine transport system” says Ernesto Garberoglio, General Director of Alstom Argentina.

Alstom has been present in Argentina since 1993, maintaining its presence over the years, which demonstrates a strong commitment to the country and its inhabitants. Dedicated to the transport sector on rails, it provides products and services to the metro operator of the City of Buenos Aires (Metrovías) and to the owner of the metro infrastructure (SBASE). It also has projects with Argentine Railways Infrastructure (formerly ADIFSE) and with the Railway Operator State’s Society (SOFSE) in the implementation of technological solutions for passenger and commercial transport.

Alstom to Supply Driverless Trains & Digital Signalling System for Sydney Metro Extension

November 23, 2019 / WIL BALDWIN

Australia’s biggest public transport project

22 November 2019 – The Northwest Rapid Transit Consortium (NRT) has reached contractual close for the extension to the existing NRT Public Private Partnership (PPP) contract on Sydney Metro.

The contract, which was awarded in 2014, has been extended to deliver a seamless customer experience on the new metro, with NRT to operate and maintain the full metro line from Rouse Hill to Bankstown – in total 66 kilometres of rail and 31 metro stations by 2024.

Alstom has signed a contract with NRT to supply the rolling stock and signalling system for the next stage of Sydney Metro, Sydney Metro City and Southwest. The project is an extension of the Metro North West Line, which successfully opened to customers in May 2019.

Under the contract, valued at approx. €350 million, Alstom will be responsible for the project management, design, supply, manufacturing, testing and commissioning of 23 six-car fully-automated Metropolis trains and the Urbalis 400 Communication Based Train Control (CBTC) signalling system. The trains will be manufactured in Alstom’s manufacturing centre in Sri City, India which successfully delivered 22 Metropolis trains for the Metro North West Line. The contract also includes an option to purchase further trains if required.

“Sydney Metro has been a game changer for the travelling public of Sydney and Alstom is delighted to continue to be a part of this iconic project. It strengthens Alstom’s position as the market leader for the supply of railway technologies in Australia.” said Ling Fang, Senior Vice President of Alstom Asia-Pacific.

As an extension of the existing Metro North West Line, the NRT PPP will provide a fully integrated turn-up and go service along a dedicated 66-kilometre metro network with a total of 31 stations from Rouse Hill through the City and to Bankstown. The Metro North West Line operator, Metro Trains Sydney, will be responsible for the operations and maintenance of the entire line.

The City and Southwest extension includes a 15km greenfield line with seven new stations plus the conversion of the existing suburban rail line to metro rail standards, covering a further 13km of track and 11 existing stations. The project also includes expansion of the current Sydney Metro Trains Facility at Rouse Hill and a new trains facility at Sydenham. Construction of the new line is currently underway with revenue service expected to start in 2024.

The Metropolis trains and digital signalling systems for the City & Southwest project will include the same design and features as the North West Line, designed to meet the specific needs of Sydney. According to the specifications, the new trains will meet strict sustainability criteria; a robust lightweight structure, low energy consumption, high levels of recoverability and recyclability, technical reliability and ease of maintenance. The trains will also be equipped with remote sensors for optimal maintenance planning.

Alstom has put sustainability and the passenger at the heart of its design process. The trains for Sydney will be built with the safety and comfort of passengers in mind, offering accessibility, wide doors and spaces to facilitate passenger flow, acoustic comfort, vibration mitigation and passenger information in real time.

Alstom’s metro trains are a world-leading, proven, safe and reliable train that serve many of the world’s great cities, including Paris, London, Amsterdam, Barcelona and Singapore. Alstom has more than 65 years’ experience in the production of metros, having sold over 17,000 metro cars that operate in 55 cities around the world and carry 30 million passengers every day.

Rouse Hill Station is on Sydney’s first metro line, Metro Northwest, which opened on 26 May, 2019. Services at the 13 metro stations operate every four minutes in the peak in each direction on Australia’s first driverless railway.

Alstom Unveils Mock-up of Mumbai Metro Aqua Line 3

November 6, 2019 / WIL BALDWIN

Alstom and Mumbai Metro Rail Corporation (MMRC) unveiled the life-sized mock-up of the trainset for Mumbai Metro Line 3 (Aqua Line). The new, iconic and exclusive design for Mumbai meets all technical and manufacturing parameters. The mock-up provides a glimpse of the advanced features that will make daily commute substantially easier for millions of citizens in the city.

Once operational, the Aqua Line will reduce vehicular congestion by offering a better alternative that will be fast, efficient and sustainable. Earlier, in August this year, the scale model of the rolling stock was unveiled by Devendra Fadnavis, Chief Minister of Maharashtra in presence of Ashwini Bhide, Managing Director of MMRC along with senior officials. At the same event, Line 3 was christened as Aqua Line, inspired by the vital flow of the sea which is an integral part of the city.

Speaking of this milestone, Alain Spohr, Managing Director, Alstom India and South Asia said, “Our objective was to create an appropriate, future-proofed design that is relevant to the people, the city and their expectations. This theme is called – Dynamic Fluidism. All technical and manufacturing parameters have been met in respect to the high interior density layout and space efficiency. We are proud to present this ‘New Face of Mumbai Transportation’. Alstom is committed to support MMRC in easing the transportation challenges of Mumbai. With the project stipulating more than 80% localized manufacturing, this contract further reinforces Alstom’s commitment to invest, grow and Make in India.”

The design takes inspiration from the positive energy of Mumbai and architecture of the city–which is an amalgamation of different styles from around the world. The theme captures evolution of the city’s architectural landscapes over the years.

The exterior theme is a tribute to the energy flowing through the city of Mumbai – the city that never sleeps. Inspired by the vital flow of water and aspiring to be a fast, efficient and sustainable mode of travel, to become the new lifeline for the people of Mumbai.

The interior colour harmony is inspired by the people of Mumbai–always on the move, who turn to the sea for peace and are soothed by its waves and breeze. This inspired the idea to use a unique blend of comfort (beige) and freshness (arctic green) to provide a relaxing and refreshing travel experience.

The trainsets for Aqua Line will be equipped with regenerative braking system aiding significant reduction in carbon emissions. The 177.2 meter-long trainsets will have higher capacity capable of ferrying around 3,000 passengers in one trip to accommodate high passenger flow.

Aqua Line trainset will have safety features that include CCTV cameras, smoke detectors, emergency intercoms, fire extinguishers with large detrainment doors to quickly evacuate passengers in an emergency. The trainsets have appropriate signages, three rows of grab rails, grab handles, poles for holding and dedicated space for passengers with luggage. The design also ensures easy accessibility and comfort for the differently abled, with dedicated space for wheelchair in every car.

MMRC awarded Alstom a contract worth €315 million to supply 31 lightweight, fully-furnished modern passenger trainsets of 8 cars each (total 248 metro cars) for Mumbai Metro Line 3 (Aqua Line) in September 2018. Along with rolling stock, Alstom will also execute the power supply contract and equip Line 3 with Urbalis 400, its latest generation of CBTC signalling technology. The scope of the signalling contract (worth €100 million) includes unattended train operation (UTO), computer-based interlocking and centralised train supervision, platform screen doors, as well as the electrical and mechanical supervisory control and data acquisition system (E&M SCADA).

The Aqua Line has 27 stations (26 under-ground & 1 at-grade), 33.5-km long underground stretch connecting the busiest and most congested regions in Mumbai – one of the fastest growing cities in India. The metro line will connect Cuffe Parade business district in the extreme south of the city to Santacruz Electronics Export Processing Zone in the north-central. The Aqua Line will be the first underground metro line in Mumbai and will be one of the longest underground continuous stretches in India.

Bane NOR and Siemens Mobility Celebrate Milestone in Digitalization of Norway’s Rail Network

November 2, 2019 / WIL BALDWIN

Campus Nyland test, training and signaling simulation center opens
European Rail Traffic Management System (ERTMS) latest in intelligent infrastructure
Nordlandsbanen will open first digital signaling railway in October 2022

Bane NOR and Siemens Mobility celebrated the opening of Campus Nyland, a test, training and signaling simulation center which will help the rail network operator prepare for the digitalization of the entire system. Norway has committed to becoming the first country to operate with a single digital interlocking and ERTMS signifies one of the country’s largest digitalization projects. In 2022, the first digital line, Nordlandsbanen, will open. In advance, the Campus Nyland center will prepare workers for working within the digital system, ERTMS. The intelligent infrastructure behind ERTMS will reduce operating costs and increase capacity throughout the network. In addition, it will enhance safety, with real-time visibility of trains across the network. When complete in 2034, the system will include 4,200 km of track and more than 350 stations.

“Siemens Mobility is the main supplier to the Norwegian ERTMS program with their infrastructure, including interlockings and radio block centres (RBC). The Siemens Mobility solution is leading edge based upon an IP based architecture. With a strong technical roadmap and a proven ability to deliver, Siemens Mobility is the ideal partner for Bane NOR in this challenging program. We are thrilled to work together with Siemens Mobility to develop the digital rail,” said Sverre Kjenne, Executive Vice President Digitalisation and Technology, Bane NOR.

“Norway is on track to become the first country to operate in the “one country, one interlocking” architecture making it at the forefront of digitalization. Our intelligent infrastructure will ensure that the system operates efficiently. The digital interlocking, with IP controlled field components, and ERTMS are the backbone to greatly improving operations and maintenance. This architecture also opens the door for future developments such as implementing driverless technologies, moving the interlocking to the cloud, which would make proprietary hardware and spare parts a relic of the past, and would make data instantaneously available to transportation operators,” stated Michael Peter, Siemens Mobility CEO. “Campus Nyland is an important milestone in turning this vision into reality.”

Campus Nyland will be an industry center for digital education and will house more than 5,000 employees, who will learn the necessary digital skills needed to ensure ERTMS is successful when it goes operational. These will include individuals from Bane NOR, train companies, maintenance companies and contractors. Bane NOR will facilitate simulator training as well as physical training facilities. New technology, such as virtual reality, will be used to communicate how the tracks are built with ERTMS, as well as the design of trains and traffic control centers. More than 150 different scenarios are available for training within the highly digital training hub.

In the spring of 2020, the Roa – Hønefoss ERTMS test line opens. The new signaling technology will be monitored and tested from Campus Nyland.

The next important milestone in turning ERTMS into a reality will be the digitalization of the first Norwegian rail line. In October 2022, Nordlandsbanen, which operates from Grong to Bodø, and represents about 12 percent of the Norwegian railway will go operational.

Alstom to Test its Hydrogen Fuel Cell Train in the Netherlands

November 2, 2019 / WIL BALDWIN

First pilot project with Coradia iLint outside Germany

31 October 2019 – Alstom and the Province of Groningen, local operator Arriva, the Dutch railway infrastructure manager ProRail and the energy company Engie have signed plans for a pilot project to test the Coradia iLint, the world’s first passenger train powered by hydrogen fuel cells, for the first time in the Netherlands. The signature took place as part of the “Klimaattop”, or Climate Summit Northern Netherlands, taking place this week in Groningen.

The tests will be carried out on the track between Groningen and Leeuwarden at up to 140 km/h and will last about two weeks. The ambition is to organise the test during the first quarter of 2020. The objective is to demonstrate that hydrogen fuel cell technology is an appropriate way to achieve zero-emission rail traffic on non-electrified lines in the Netherlands where there are currently diesel trains running.

“Alstom is committed to developing and implementing mobility solutions that permit not only the emergence of fully sustainable transport systems but also help drive the broader energy transition. We look forward to demonstrating what has already been proven in Germany – that hydrogen represents a highly suitable way forward in both cases,” said Bernard Belvaux, Managing Director of Alstom Benelux.

The Coradia iLint is the world’s first passenger train powered by a hydrogen fuel cell, which produces electrical power for traction. The train is quiet and emission-free, emitting only water and steam during operation. It represents a clean alternative for railway operators and regional authorities wishing to replace diesel fleets for operation on non-electrified lines and meet ambitious zero-emission objectives.

The world’s first two hydrogen trains have already been in regular passenger service in Lower Saxony in Germany since September 2018. The local transport authority LNVG will operate 14 Coradia iLint trains on that line from 2021. Also in Germany, RMV this ordered 27 Coradia iLint – the largest fleet of hydrogen trains in the world – for operation from 2022.

The Dutch railway network has approximatively 1,000 kilometres of non-electrified line.

Bombardier Celebrates 25th Anniversary of Germany’s First Automatic People Mover System

October 27, 2019 / WIL BALDWIN

INNOVIA APM vehicles carry twelve million passengers annually at Frankfurt am Main Airport – with almost 100 percent reliability
The system’s 25-year anniversary corresponds with Fraport’s opening of Terminal 2

Bombardier’s Frankfurt team celebrating the 25th anniversary of successfully operating and maintaining the INNOVIA APM fleet at Frankfurt Airport.

Today, global mobility solution provider Bombardier Transportation celebrates 25 years of fully automatic BOMBARDIER INNOVIA APM 100 people mover system’s operation at Frankfurt am Main Airport. The system and Fraport’s Terminal 2 opened on the same day 25 years ago. Since 1994, Germany’s first elevated passenger transport system called the SkyLine, has connected Terminals 1 and 2. With an average reliability of 99.83 percent, twelve million passengers and guests per year safely and comfortably arrive at their destinations in the terminals – around the clock.

“We’d like to congratulate our customer on this quarter century anniversary. We have a very successful and long-standing partnership with Fraport, which marks our joint success in moving millions of travelers between terminals at the Frankfurt Airport,” said Michael Fohrer, Head of Bombardier Transportation Germany.

“Fraport benefits from a high-performing turnkey transit system, which was not only manufactured by Bombardier, but also operated and maintained. I am grateful to all our committed and competent employees, without them this milestone would not have been possible,” emphasized Alexander Ketterl, Head of Sales and Delivery German cities at Bombardier Transportation.

Volker Maul, Head of the Bombardier team at Frankfurt Airport, can look back on the people mover system’s 25 years of service. “The excellent cooperation within our team and with our customer built the foundation for the system’s near 100 percent reliability. Bombardier’s operations and maintenance program is carefully designed to optimize system performance and ensure potential problems are identified and resolved before the service’s efficiency is compromised,” he explained.

Fraport’s fleet of 18 INNOVIA vehicles transport around thirty-five thousand passengers daily, on the 3.8 km route between departure terminals. During peak times, the trains depart every 90 seconds with each wagon carrying up to 60 passengers and their luggage.

In 1994, Fraport was the first German customer to invest in Bombardier’s driverless system, installed with the proven BOMBARDIER CITYFLO 550 signaling system. CITYFLO delivers the highest levels of safety while meeting customer demand for flexible, high-performance and cost-effective solutions. More than 30 Bombardier people mover systems are in successful operation worldwide, including urban areas such as Guangzhou and airports in London, Rome, Madrid, Phoenix, Dubai and Tampa among other cities.

Milestone in Alstom’s First System Contract in Vietnam

October 26, 2019 / WIL BALDWIN

Alstom on track to complete first train for Hanoi Metro Line 3

26 October 2019 – Alstom, which is manufacturing 10 trains for Hanoi Metro Line 3, today hosted Deputy General Secretary of the Communist Party of Vietnam, Tran Quoc Vuong, and his delegation to a visit of its train assembly plant in Valenciennes (France). The plant is working to complete the first trainset by the end of October, marking an important milestone in Alstom’s first integrated metro system contract in Vietnam, signed with MRB (Hanoi Metropolitan Railway Management Board) in 2017.

As part of the visit, Alstom’s Managing Director for China and East Asia, Olivier Loison, and Chairman of the Hanoi People’s Committee and Mayor of Hanoi, Nguyen Duc Chung, signed a memorandum of understanding regarding the existing contract of Alstom in Hanoi. The agreement aims to foster further collaborative opportunities between both parties for new systems within the Vietnamese capital.

“We are honoured to have Deputy General Secretary Vuong and his team witness the final assembly of our first train for Hanoi Metro Line 3 here in Valenciennes. This will be an important milestone for the bilateral project as we bring this train to fruition. We look forward to remaining a close and long-term partner of Vietnam, addressing its mobility needs and supporting it in its upcoming transport projects,” said Olivier Loison.

In 2017, Alstom, as leader of a consortium including Colas Rail and Thales, was awarded a contract to supply an integrated metro system for Hanoi Metro Line 3. Alstom’s share covered the supply and integration of the metro system, including the 10 trains and the Urbalis 400 signalling system[1], as well as the delivery of power supply and depot equipment together with a partner. The new line is 12.5 kilometres long with 12 stations. It is expected to carry over 23,900 passengers per hour and per direction at peak capacity.

Alstom puts the passenger at the heart of its train design process. The four-car Metropolis trains for Hanoi Metro Line 3 will feature wide doors to facilitate passenger flow, dedicated space for passengers with reduced mobility, as well as ergonomic and easy-to-grab bars. The trains will be fully electric, with lightweight aluminium car bodies. The train’s exterior and interior colour scheme takes local Vietnamese inspiration and includes motifs such as dragon fruit and the rice paddy field – a design that was well-received by the people at a public consultation held in September 2018.

When completed, the first train will undergo a series of static and dynamic tests at the Valenciennes Railway Testing Centre during the month of November. Tests will be carried out on the trains’ automatic control system and on-board audio-visual equipment, this time on Hanoi Metro Line 3 in the second half of 2020. Entry into service is expected in the first half of 2021.

Alstom has built up close to 30 years of presence in Vietnam. It has provided signalling and telecommunication system modernisation services for the Hanoi-Vinh regional line phase one and phase two and has offered signalling and telecommunication systems for Ninh Binh station.

[1] Alstom’s Communication Based Train Control (CBTC)-solution, which controls the movement of the trains and enables trains to run at higher frequencies and speeds in total safety

Alstom to Supply 39 Additional Coradia Polyvalent Trains to the Grand Est Region

October 23, 2019 / WIL BALDWIN

contract worth over 360 million euros in France

22 October 2019 – Alstom will supply 39 additional Coradia Polyvalent trains to the Grand Est region for the sum of approximately 360 million euros[1]. The region had already ordered 40 Coradia Polyvalent trains, of which 36 have already been delivered. Deliveries of these new trains will be staggered between 2022 and 2024.

Firstly, this new order covers 30 trains intended for cross-border circulation in Germany. These 4-car trains, which are dual mode – dual voltage 25 kV / 15 kV and comply with German safety requirements, will run at 160 km/h, serving the German states of Saarland, Rhineland-Palatinate and Baden-Württemberg. The 30 Coradia Polyvalent cross-border trains will offer a first-class zone and an area for bicycles, and will incorporate the new TSI PRM[2] 2014 standard, notably offering more spacious toilets to facilitate movement for passengers with reduced mobility. The first cross-border trains will be delivered at the end of 2023.

Secondly, nine additional Coradia Polyvalent trains, consisting of five 4-car and four 6-car trains, have been added to the existing fleet for domestic connections. These new trains will benefit from the same special features as those already in operation in the Grand Est region.

“Alstom is proud of this new sign of trust from the Grand Est region. The expertise and innovation capacities of our French teams are mobilised to support the region in developing cross-border mobility. This order also contributes to the activity of Alstom’s Reichshoffen site,” says Jean-Baptiste Eyméoud, President of Alstom in France.

Coradia Polyvalent belongs to Alstom’s Coradia range of trains. With its modular architecture, it can be adapted to the requirements of each public transport authority as well as to different types of use: suburban, regional and intercity. It comes in three lengths (56, 72 or 110 metres) and offers optimal comfort to passengers, whatever the length of the journey. The train is both ecological and economical due to its low energy consumption, its compliance with the latest emissions standards in thermal mode and its reduced maintenance costs. Coradia Polyvalent is the first French regional train to comply with all European standards, in particular with regard to access for people with reduced mobility.

To date, 387 Coradia Polyvalent trains have been ordered as part of the contract awarded to Alstom by SNCF in October 2009, including 320 Coradia Polyvalent for Régiolis by 9 French regions and 67 Coradia Liner by the French state, the authority responsible for the country’s TET (intercity) trains. Régiolis has already covered nearly 85 million kilometres in commercial service.

The Coradia Polyvalent train also meets the needs of the export market: 17 trains have been ordered by SNTF (Algeria) and 15 trains by APIX (Senegal).

This is Coradia Polyvalent’s second cross-border application as the region of Auvergne-Rhône-Alpes has ordered 17 Léman Express Coradia Polyvalent trains, to be commissioned on the CEVA cross-border line between France and Switzerland in mid-December 2019.

The manufacturing of Coradia Polyvalent secures more than 4,000 jobs in France for Alstom and its suppliers. Six of Alstom’s 12 sites in France are involved in the project: Reichshoffen for the design and assembly, Ornans for the engines, Le Creusot for the bogies, Tarbes for the traction chains, Villeurbanne for the on-board electronics and signalling products, and Saint-Ouen for the design.

[1] Booked in the second quarter of the current fiscal year

[2] Technical Specifications for Interoperability relating to Persons with Reduced Mobility

Alstom’s Tram Enters Service in Avignon

October 20, 2019 / WIL BALDWIN

Alstom has commissioned its first new-generation Citadis X05 tram in its short version, on the first tramway line of Grand Avignon. The inauguration took place in the presence of Elisabeth Borne, Minister of the Ecological and Solidarity Transition, Renaud Muselier, President of Région Sud, Maurice Chabert, President of the Vaucluse Department, Patrick Vacaris, President of Grand Avignon, Cécile Helle, Mayor of Avignon, Jean-Marc Roubaud, President of Técélys and Jean-Baptiste Eyméoud, President of Alstom France.

“Alstom and its teams are proud to be present at the commissioning of this first tramway line in Avignon. Thanks to their reliability, availability and easier maintenance, we are fully confident in the ability of the 14 Citadis trams to address the major travel challenges of the Agglomeration Community of Grand Avignon. I would also like to thank the members of Grand Avignon for having entrusted us with part of the infrastructural work. This new line will become a showcase for the expertise of the French rail sector,” said Jean-Baptiste Eyméoud, President of Alstom in France.

24 metres long, equipped with 4 double doors on each side, the Citadis X05 tram for Grand Avignon will be able to carry more than 140 passengers. The full low floor and double doors facilitate accessibility and passenger exchange in stations. Everything has been designed for a pleasant travel experience: large bay windows covering 40% of the tram, LEDs with diffusers for soft, homogenous lighting, a state-of-the-art information system, large seats, air conditioning, and a video protection system.

Citadis X05 has standardised, proven, more accessible components, providing residents of the Avignon area with reliable, readily available material. Citadis X05 is particularly energy efficient and up to 99% recyclable.

Alstom offers a wide range of products and services and has also provided the tracks (studies, supply and assembly), the 750 V electrical substation and 6 km of overhead contact lines (studies, supply, installation and testing) in partnership with TSO.

Seven of Alstom’s thirteen sites in France are involved in the design and manufacture of the tram for Grand Avignon: La Rochelle (for the design and assembly of the trams), Ornans (for the engines), Le Creusot (for the bogies), Tarbes (for the traction drive equipment), Valenciennes (for the control system and interior layout), Saint-Ouen (for the design and infrastructure activities) and Villeurbanne (for the on-board electronic systems).

Archives