GENEVA (May 20, 2019) – Textron Aviation Inc., a Textron Inc. (NYSE:TXT) company, today announced new milestones in its Cessna SkyCourier twin utility turboprop development program, with assembly underway for the prototype aircraft and the additional five flight and ground test articles. Component testing also continues for the new propeller, nose landing gear and fuel system.
“When we began designing and developing the Cessna SkyCourier, we engaged a number of mission-centric customers for technical input to best meet their unique needs in one platform,” said Chris Hearne, senior vice president, Engineering. “We are building this aircraft with the flexibility and reliability needed for a variety of high-utilization operations including cargo, passenger or special missions and we are excited that the customers and the market are responding positively to its capabilities.”
Endurance and functional testing for the new McCauley 110-inch propeller consists of nearly 150 hours of operation and includes a variety of simulated flight profiles. The propeller is mated with the proven PWC PT6A-65B, 1100-shp engine, mounted on a test stand. Simultaneously, assembly of the fuel system test article and nose landing gear drop test article is underway, with testing to start later this month.
The Cessna SkyCourier is the latest clean-sheet design from Textron Aviation and will be offered in various configurations including cargo, passenger or a combination of both, all based on a common platform to meet the needs of a wide range of customers. The cargo configuration is designed to accommodate three standard air cargo containers (LD3) with a payload of up to 6,000 pounds while the passenger version carries up to 19 passengers.
FedEx Express, the world’s largest express transportation company and longtime Textron Aviation customer, signed on as the launch customer in late 2017 for up to 100 aircraft, with an initial fleet order of 50 cargo aircraft and options for 50 more.
STRATFORD, Conn., May 17, 2019 /PRNewswire/ — Sikorsky, a Lockheed Martin company (NYSE: LMT) will build 12 production CH-53K King Stallion helicopters under a new $1.13 billion contract from the U.S. Navy. These advanced helicopters are part of the 200 program of record aircraft for the U.S. Marine Corps.
Under the terms of the contract, known as Low Rate Initial Production (LRIP) Lot 2 and 3, Sikorsky will begin deliveries of 12 CH-53K helicopters in 2022, and also provide spares and logistical support. Sikorsky remains committed to continuing to reduce costs over the life of the program.
“I’m proud of the joint government and industry team in achieving this award,” said Col. Jack Perrin, U.S. Marine Corps program manager for the Naval Air Systems Command’s Heavy Lift Helicopters program, PMA-261.
The CH-53K is the only sea-based, long range, heavy-lift helicopter in production and will immediately provide three times the lift capability of its predecessor. The CH-53K will conduct expeditionary heavy-lift transport of armored vehicles, equipment, and personnel to support distributed operations deep inland from a sea-based center of operations. The new CH-53K will have heavy-lift capabilities that exceed all other DoD rotary wing-platforms and it is the only heavy lifter that will remain in production through 2032 and beyond.
“Sikorsky employees and our nationwide supply chain are ready to ramp up CH-53K production to support deployment of this modern, safe and reliable aircraft in 2023-2024,” said Sikorsky Program Director Bill Falk. “This contract demonstrates the U.S. Marine Corps’ confidence in Sikorsky to expand production of this technologically advanced heavy lift helicopter.”
Lockheed Martin, Sikorsky, and its suppliers have made significant investments in facilities, machinery, tooling, and workforce training to ramp-up production required for the CH-53K program. For example, we have installed more than eight new titanium machining centers, designed and implemented a new final assembly test facility with multi-floor ergonomic work platforms, installed 10-ton cranes, and now have 3D work instructions on the factory floor.
“We have transformed our factory for the future and implemented a model for all future helicopter programs,” Falk said. “Additionally, our engineers have implemented the latest technologies such as manufacturing simulation and 3D laser inspection technology. These investments in systems, personnel, and our facilities have elevated Sikorsky’s manufacturing technology and capabilities to meet production requirements of the CH-53K for domestic and international customers.”
King Stallion Progress Update
The all-new CH-53K, designed to be intelligent, reliable, low maintenance and survivable in the most difficult conditions, has flown more than 1,400 test hours and has met all the outer reaches of the test envelope. The King Stallion is in the midst of a rigorous test program to ensure militaries can safely move troops and equipment at higher altitudes, quicker and more effectively than ever.
The CH-53K, which has proven it can lift more than 36,000 pounds, is the most powerful heavy lift helicopter ever built in the United States. The King Stallion’s technologically advanced design will meet the future warfighting requirements for decades to come, enabling missions like humanitarian aid, troop and equipment transport, casualty evacuation (CASEVAC), support of special operations forces, and combat search and rescue (CSAR).
Accomplishments to date include: high altitude, hot temperature, and degraded visual environment flights, maximum weight single-point cargo hook sling load of 36,000 pounds (16,329 kilograms); forward flight speed of over 200 knots; 60 degrees angle of bank turns; altitude of 18,500 feet mean sea level (MSL); 12-degree slope landings and takeoffs; external load auto-jettison; and gunfire testing.
For additional information, visit www.ch-53k.com.
About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
The CH-53K is a modern, marinized, fly-by-wire aircraft that can move more cargo, farther and at longer distances that any other aircraft in production. For example, the CH-53K can lift an up-armored 22,600 lb. JLTV and carry it 110 nautical miles, in high and hot conditions and still have capacity for an additional 4,400 pounds of payload. There is no other helicopter that comes close to the performance of the CH-53K or that can meet Marine Corps requirements. Photo courtesy U.S. Navy.
Mérignac, France, 14 May 2019 – Today, Dassault Aviation officially launched the construction of an office building on its site in Mérignac, France, as a step of its “Leading our Future” transformation plan. The building will accommodate design, development and after-sales support teams for the firm’s civil and defense activities.
“This ambitious project reflects our aim to bring together some of the teams who design and support our aircraft and those responsible for producing them. It fosters collaborative working as part of the rollout of our extended design office concept. The principle is to integrate even more and whenever required, from the design phase, all the trades involved in the product life cycle. This building will not just house offices, it will be one of the means to reframe the interactions between Mérignac and Saint-Cloud. We are expecting better links between technical competence, product knowledge and customer services”, said Eric Trappier, Chairman and CEO of Dassault Aviation. “It is one of the focuses of our transformation plan which, without altering the DNA that has underpinned our century-long success, aims to make our company more flexible and more competitive to respond to the technology challenges ahead and the changes occurring in the world around us.”
The new building will offer 25,800 sq. m of surface area over four levels with a total capacity of 1,500 workstations including 24 modular collaborative work spaces and nine project offices. The building will also provide VIP rooms for our civil and military customers, a Falcon command center, rooms for aircraft system test benches, a Virtual Reality Center, an Immersive Reality Center and an auditorium.
The highest environmental standards will be applied including smart lighting and energy management, solar panels (4,000 sq. m), reinforced insulation, green roofs, and a heat recovery system.
Presided over by Eric Trappier, alongside Valérie Guillemet, Mérignac Site Manager, the “groundbreaking” ceremony was attended by many local elected representatives, particularly the President of the Nouvelle-Aquitaine Region Alain Rousset, the President of Bordeaux Métropole Patrick Bobet, the Mayor of Mérignac Alain Anziani and the Mayor of Bordeaux Nicolas Florian. Representatives of official services, as well as the region’s aviation ecosystem and the media were also present at the event.
Work is scheduled for completion at the end of 2020, and the building should be commissioned in 2021.
About Dassault Aviation
With over 10,000 military and civil aircraft delivered in more than 90 countries over the last century, Dassault Aviation has built up expertise recognized worldwide in the design, development, sale and support of all types of aircraft, ranging from the Rafale fighter, to the high-end Falcon family of business jets and military drones. In 2018, Dassault Aviation reported revenues of €5.1 billion. The company has 11,500 employees.
Commissioner Vincenzo Nicastro: “We want to begin exploring the demand in the market to better understand those who are currently potentially interested”.
The Extraordinary Commissioner of Piaggio Aerospace, Vincenzo Nicastro, wants to implement an initial analysis in order to evaluate the market’s interest in buying the company or one of its business units (Aircraft and Engines) or to conduct a reorganization, in accordance with the “Marzano Law”.
Piaggio Aerospace (in Extraordinary Receivership since last December) published today a paid notice in a selected number of financial newspapers after authorization from the Ministry of Economic Development. A copy of the announcement can be found at www.piaggioaeroas.it, where a short presentation of the company is also available.
“The goal of this action,” declares Nicastro, “is to better understand who the interested candidates are as a way to evaluate their characteristics in order to maintain business continuity for Piaggio Aerospace, thus moving forward with subsequent initiatives according to the law”.
In particular, the Aircraft business unit focuses on the design, construction and maintenance of civil and military aircraft, along with customer service activities. The Engine business unit revolves around the design, construction and maintenance of aero-engines.
During a meeting held in Rome on April 24, 2019, the Italian Ministry of Economic Development and the Ministry of Defence agreed on a plan to support Piaggio Aerospace business activities.
The Italian Government indicates the goal on Piaggio Aerospace to conduct all engine maintenance out of one single hub, confirming Piaggio Aerospace as a reliable partner in this specific field. The plan also foresees new contracts for the engine maintenance with a ten-year plan; a contract for the retrofitting of nineteen P.180-Avanti operated by various Italian Institutions and the purchase of ten new P.180-Avanti.
Finally, the plan also includes the completion of the P.1HH HammerHead (the Unmanned Aerial System) certification process, along with the subsequent acquisition of two systems and the development of further technology to support Piaggio Aerospace to compete in the international market arena. Each system is made out of a Ground Control Station and two aircraft. More systems would be acquired in the medium- term.
All EOI, which are non-binding, should be sent (in English or Italian) to the Extraordinary Commissioner by 6 pm CEST on Wednesday, May, 15, 2019 via email at piaggioaeroamministrazionestraordinaria2@pec.piaggioaero.it.
WEST PALM BEACH, Fla., March 21, 2019 – The Sikorsky-Boeing SB>1 DEFIANT™ helicopter achieved first flight today at Sikorsky’s West Palm Beach, Fla., site. This revolutionary aircraft, developed by Sikorsky, a Lockheed Martin Company [NYSE: LMT], and Boeing [NYSE: BA], will help inform the next generation of military helicopters as part of the U.S. Army’s Future Vertical Lift program.
“The design and development of DEFIANT has revealed the capability
advancement that is truly possible for Future Vertical Lift,” said David
Koopersmith, vice president and general manager, Boeing Vertical Lift.
“Clearly, the performance, speed and agility of DEFIANT will be a game
changer on the battlefield and we look forward to demonstrating for the
U.S. Army the tremendous capabilities of this aircraft.”
With its two coaxial main rotors and a rear mounted pusher propulsor,
DEFIANT is unlike production rotorcraft available today. It represents a
leap forward in technology to achieve the U.S. government’s desire for
vast increases in speed and range while improving maneuverability and
survivability in a cost-effective way. DEFIANT aircraft’s use of X2™
Technology will allow the Army to penetrate from strategic standoff and
exploit gaps created in complex Anti-Access Area Denial systems against
near-peer adversaries.
“DEFIANT is designed to fly at nearly twice the speed and has twice
the range of conventional helicopters while retaining the very best, if
not better, low-speed and hover performance of conventional
helicopters,” said Dan Spoor, vice president, Sikorsky Future Vertical
Lift. “This design provides for exceptional performance in the objective
area, where potential enemy activity places a premium on
maneuverability, survivability and flexibility. We are thrilled with the
results of today’s flight and look forward to an exciting flight test
program.”
The helicopter is participating in the Army’s Joint Multi-Role-Medium
Technology Demonstrator program. Data from DEFIANT will help the Army
develop requirements for new utility helicopters expected to enter
service in the early 2030s. This flight marks a key milestone for the
Sikorsky-Boeing team and is the culmination of significant design,
simulation and test activity to further demonstrate the capability of
the X2 Technology.
X2 Technology is scalable to a variety of military missions such as
attack and assault, long-range transportation, infiltration and
resupply. DEFIANT is the third X2® aircraft in less than 10 years.
About Lockheed Martin Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
BERLIN (Reuters) – The German government on Monday said it was in talks with Airbus about 600 million euros (514 million pounds) in outstanding loans for developing the A30 superjumbo jet, which Airbus now plans to scrap.
A spokeswoman for the German Economy Ministry confirmed the value of the outstanding loans, first reported by Funke Mediengruppe newspaper chain, but said it was premature to discuss how the issue would be resolved.
“We are analysing the consequences and discussing the issue with the company,” the spokeswoman told a regular government news conference.
(Reporting by Andreas Rinke and Tassilo Hummel; Writing by Andrea Shalal; Editing by Michelle Martin)
WEST PALM BEACH, Fla., Feb. 27, 2019 /PRNewswire/ — Two fully assembled HH-60W Combat Rescue Helicopters (CRH), built by Sikorsky, a Lockheed Martin company (LMT), are preparing for their maiden flights, which will occur before mid-year at the Sikorsky West Palm Beach site in Florida.
Two HH-60W Combat Rescue Helicopters are at the Sikorsky Development Flight Center in West Palm Beach, Florida, in preparation for flight test. Photo courtesy of Sikorsky.
Both aircraft, which are being built for the U.S. Air Force, were transported late last year to West Palm Beach following final assembly at Sikorsky’s facility in Stratford, Connecticut. The aircraft test readiness review was completed in October 2018. The CRH HH-60W flight test team is currently preparing both aircraft for flight by conducting final installation of instrumentation and ground run testing. This marks formal entry into the flight test program that culminates in Ready Assets Available (RAA), allowing the Air Force to declare Initial Operational Capability (IOC).
“Having these initial HH-60W helicopters in West Palm Beach for flight test is an exciting time for the Sikorsky team. It is the first step toward a low rate initial production decision later this year, which will allow Sikorsky to provide a constant production flow of aircraft to the warfighter,” said Greg Hames, Sikorsky director, Combat Rescue Helicopter program. “This is the point in the program when Sikorsky begins providing new aircraft into the warfighters’ hands, initiating transition to the vastly more capable and reliable HH-60W Combat Rescue Helicopter.”
The first of the two HH-60W aircraft will enter flight test with the new Tactical Mission Kit. The integration of sensors, radar, and multiple defense systems will bring added intelligence into the cockpit, enhancing pilots’ situational awareness to complete missions, which is key to improving aircraft and isolated personnel survivability. Sikorsky’s HH-60W team completed the System Configuration Test Readiness Review milestones for the Tactical Mission Kit last year.
The HH-60W hosts a new fuel system that nearly doubles the capacity of the internal tank on a UH-60M Black Hawk, giving the Air Force crew extended range and more capability to rescue those injured in the battle space. The CRH specification drives more capable defensive system, vulnerability reduction, weapons, cyber-security, environmental, and net-centric requirements than currently held by the HH-60G.
“Our team is working every day to build and deliver a superior quality helicopter to the U.S. Air Force for this critical mission,” added Hames. “Both Sikorsky and the Air Force remain committed to achieving a low rate initial production decision this year and getting this much-needed aircraft to our air men and women out in the field.”
A total of nine aircraft will be built in Connecticut during the Engineering Manufacturing Development (EMD) phase of the program ― four EMD aircraft and five System Demonstration Test Articles. The Air Force program of record calls for 112 helicopters to replace its aging HH-60G Pave Hawk helicopters.
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
AVALON,
Australia (Reuters) – Boeing Co on Wednesday unveiled an unmanned,
fighter-like jet developed in Australia and designed to fly alongside
crewed aircraft in combat for a fraction of the cost.
The
U.S. manufacturer hopes to sell the multi-role aircraft, which is 38
feet long (11.6 metres) and has a 2,000 nautical mile (3,704 kilometre)
range, to customers around the world, modifying it as requested.
The
prototype is Australia’s first domestically developed combat aircraft
since World War II and Boeing’s biggest investment in unmanned systems
outside the United States, although the company declined to specify the
dollar amount.
The
Australian government is investing A$40 million ($28.75 million) in the
prototype programme due to its “enormous capability for exports,”
Minister for Defence Christopher Pyne told reporters at the Australian
International Airshow.
Defence
contractors are investing increasingly in autonomous technology as
militaries around the world look for a cheaper and safer way to maximise
their resources.
Boeing rivals like Lockheed Martin Corp and Kratos Defence and Security Solutions Inc are also investing in such aircraft.
Four
to six of the new aircraft, called the Boeing Airpower Teaming System,
can fly alongside a F/A-18E/F Super Hornet, said Shane Arnott, director
of Boeing research and prototype arm Phantom Works International.
“To
bring that extra component and the advantage of unmanned capability,
you can accept a higher level of risk,” he said. “It is better for one
of these to take a hit than for a manned platform.”
The
Mitchell Institute for Aerospace Studies in the United States said last
year that the U.S. Air Force should explore pairing crewed and uncrewed
aircraft to expand its fleet and complement a limited number of
“exquisite, expensive, but highly potent fifth-generation aircraft” like
the F-35.
“Human
performance factors are a major driver behind current aerial combat
practices,” the policy paper said. “Humans can only pull a certain
number of G’s, fly for a certain number of hours, or process a certain
amount of information at a given time.”
MULTI-MISSION CAPABILITIES
In
addition to performing like a fighter jet, other roles for the Boeing
system include electronic warfare, intelligence, surveillance and
reconnaissance alongside aircraft like the P-8 Poseidon and E-7
Wedgetail, said Kristin Robertson, vice president and general manager of
Boeing Autonomous Systems.
“It
is operationally very flexible, modular, multi-mission,” she said. “It
is a very disruptive price point. Fighter-like capability at a fraction
of the cost.”
Robertson declined to comment on the cost, saying that it would depend on the configuration chosen by individual customers.
The
jet is powered by a derivative of a commercially available engine, uses
standard runways for take-off and landing, and can be modified for
carrier operations at sea, Robertson said. She declined to specify
whether it could reach supersonic speeds, common for modern fighter
aircraft.
Its
first flight is expected in 2020, with Boeing and the Australian
government producing a concept demonstrator to pave the way for full
production.
“I
would say we are some years away from exports, we are probably years
away from it being in operation here in Australia,” Pyne said. “It is
designed to be a cheaper platform, a shield if you like around the more
expensive platforms, to protect our servicemen and women who might be on
a Poseidon or a Wedgetail or a F-35A.”
Australia,
a staunch U.S. ally, is home to Boeing’s largest footprint outside the
United States and has vast airspace with relatively low traffic for
flight testing.
The
Boeing Airpower Teaming System will be manufactured in Australia, but
production lines could be set up in other countries depending on sales,
Arnott said.
The United States, which has the world’s biggest military budget, would be among the natural customers for the product.
The
U.S. Air Force 2030 project foresees the Lockheed Martin F-35A Joint
Strike Fighter working together with stealthy combat drones, called the
“Loyal Wingman” concept, said Derrick Maple, principal analyst for
unmanned systems at IHS Markit.
“The
U.S. has more specific plans for the wingman concept, but Western
Europe will likely develop their requirements in parallel, to abate the
capabilities of China and the Russian Federation and other potential
threats,” he said.
Robertson
declined to name potential customers and would not comment on potential
stealth properties, but said the aircraft had the potential to sell
globally.
“We
didn’t design this as a point solution but a very flexible solution
that we could outfit with payloads, sensors, different mission sets to
complement whatever their fleet is,” she said. “Don’t think of it as a
specific product that is tailored to do only one mission.”
($1 = 1.3914 Australian dollars)
(Reporting by Jamie Freed; additional reporting by Gerry Doyle; editing by Gerry Doyle)
Boeing announced a partnership with Aerion, a Reno, Nev.-based company pioneering next-generation supersonic aircraft.
February 05, 2019 in Technology, Innovation
Boeing announced a partnership with Aerion, a Reno, Nev.-based company pioneering next-generation supersonic aircraft.
As part of the agreement, Boeing made a significant investment in
Aerion to accelerate technology development and aircraft design, and
unlock supersonic air travel for new markets.
“Boeing is leading a mobility transformation that will safely and efficiently connect the world faster than ever before,” said Steve Nordlund, vice president and general manager of Boeing NeXt. “This is a strategic and disciplined leading-edge investment in further maturing supersonic technology. Through this partnership that combines Aerion’s supersonic expertise with Boeing’s global industrial scale and commercial aviation experience, we have the right team to build the future of sustainable supersonic flight.”
Boeing will provide engineering, manufacturing and flight test
resources, as well as strategic vertical content, to bring Aerion’s AS2
supersonic business jet to market.
The AS2 is designed to fly at speeds up to Mach 1.4 or approximately
1,000 miles (1,609 kilometers) per hour. With the ability to fly up to
70 percent faster than today’s business jets, the AS2 will save
approximately three hours on a transatlantic flight.
The aircraft is slated for first flight in 2023.
The AS2 is designed to fly at speeds up to Mach 1.4 or approximately 1,000 miles (1,609 kilometers) per hour. Aerion Corp.
Nov 14 (Reuters) – The U.S. National Transportation Safety Board is set to hold an investigative hearing on Wednesday about a midair incident in April during which an engine on a Southwest Airlines Boeing 737 exploded over Pennsylvania, killing one passenger.
Dallas-based Southwest has been under intense scrutiny in the months since an engine on a flight headed from New York to Dallas blew apart, shattering a plane window, flinging shrapnel and killing passenger Jennifer Riordan, one of 149 people aboard.
The episode, which has raised concerns about the safety of similar engines, was the first fatality on a U.S. commercial passenger airline since 2009.
The all-day hearing in Washington will focus on the fan blade design and development history of the engine type that failed, a CFM56-7B made by CFM International, a transatlantic joint-venture between General Electric Co and France’s Safran SA, the NTSB said.
The hearing will also focus on engine fan blade inspection methods and engine fan blade containment design and certification criteria, the NTSB said.
Representatives from Chicago-based planemaker Boeing, CFM, and Southwest Airlines are due at the hearing.
The companies did not immediately respond to requests for comment.
The hearing comes as Indonesian authorities investigate last month’s deadly Lion Air crash involving a newer version of Boeing’s best-selling single-aisle aircraft, the 737 MAX.
