Tag: production (Page 12 of 17)

Explosion at Kansas Aircraft Plant Injures 15 People

December 28, 2019 / WIL BALDWIN

(Reuters) – At least 15 people were injured on Friday after a liquid nitrogen line exploded at a Textron Aviation plant near Wichita, Kansas, potentially setting back the launch of a new aircraft under development, county and company officials said.

Emergency medical services took 11 people to the hospital, one of them suffering potentially serious injuries, Dr. John Gallagher, director of Sedgwick County EMS, told a news conference.

Company officials said two of victims went to the hospital in private cars and two were treated at the scene.

Injuries were limited because only a skeleton crew was on duty during the holidays, said Deputy Chief Daniel Wegner of the Sedgwick County Fire Department.

The explosion in a 3-inch liquid nitrogen gas line also damaged a storage tank, causing nitrogen gas to vent out of the building, Wegner said.

News video from the scene showed what appeared to be a steam cloud billowing out of the damaged building. The gas was not harmful, Wegner said.

A second valve also ruptured, said Kate Flavin, a spokeswoman for Sedgwick County, and emergency crews vented nitrogen gas from the affected tanks before doing another search of the plant.

No others were found injured and control of the facility was returned to Textron shortly after noon, but emergency crews remained on standby at the scene, she said.

Damage was contained to Plant 3, a site for composite manufacturing and experimental aircraft fabrication including that of the SkyCourier, said Stephanie Harder, a spokeswoman for Textron.

The SkyCourier, a utility turboprop under development, is due to enter service in 2020, Textron has previously said. Harder said it was too early to determine what damage the prototype aircraft under production may have suffered.

Textron Aviation, a unit of Textron Inc (TXT), makes Beechcraft and Cessna aircraft.

The Wichita-area economy has long been supported by aircraft manufacturing. Boeing Co (BA) announced in January it would suspend production of its 737 Max jetliner, which has been grounded worldwide after two fatal crashes. That move affected workers at Spirit AeroSystems in Wichita, Boeing’s top supplier, which produces the jet’s fuselages.

Reporting by Daniel Trotta, Additional reporting by Rich McKay; Editing by Daniel Wallis, Bill Tarrant and Richard Chang

China’s Sixth Prototype C919 Jet Completes First Test Flight

December 27, 2019 / WIL BALDWIN

BEIJING (Reuters) – The sixth prototype of China’s home-built C919 narrowbody passenger plane completed its first test flight on Friday, marking a milestone in the programme’s testing schedule as China races to compete with Airbus SE and Boeing Co.

The sixth prototype is the last test plane its manufacturer, the Commercial Aircraft Corp of China Ltd (COMAC), has planned for the programme and was scheduled to fly before the year-end. Currently, there are five test planes that are conducting test flights elsewhere in the country.

The maiden flight on Friday from Shanghai lasted two hours and five minutes, COMAC said in a press release, adding that the jet will be conducting more test flights with a focus on cabin, lighting and external noises.

COMAC has already started production of aircraft parts which will be used for the first batch of aircraft deliveries, it said.

The state manufacturer is aiming to obtain Chinese certification for the C919 in 2021, but the date was subject to regulatory approval and the aircraft’s safety remains a top priority, according to COMAC officials.

He Dongfeng, the Communist Party boss of COMAC, wrote in a state-owned newspaper in December that aircraft safety is key to the survival of COMAC.

Designed to compete directly with the Airbus 320 and the Boeing 737 families in the market for jets with around 150 seats, the C919 is the speartip of China’s efforts to break a powerful decades-old Western duopoly.

The Boeing 737 MAX remains globally grounded following two fatal crashes that killed a total of 346 people.

(Reporting by Stella Qiu and Brenda Goh; Editing by Muralikumar Anantharaman)

Trump Called Boeing CEO to Inquire About 737 MAX Production Halt

December 19, 2019 / WIL BALDWIN

WASHINGTON (Reuters) – U.S. President Donald Trump called Boeing <BA> Chief Executive Dennis Muilenburg this week to ask about the status of 737 MAX production, two people briefed on the matter confirmed.

The call on Sunday was brief and Muilenburg assured Trump that the planned production halt was temporary and that the company would not be laying off any workers. The production halt, set to begin in January, was announced by Boeing Monday after a board meeting.

Boeing and the White House declined to comment on the call, reported earlier by the New York Times.

Separately, S&P Global Ratings on Thursday downgraded Boeing’s credit rating to “A-” from “A” and lowered the short-term rating to “A-2” from “A-1.”

The change “reflects the uncertainty over when the 737 MAX will return to service, the risk to the supply chain from the planned production halt, and possible long-term impact to Boeing’s competitive position.”

U.S. officials have repeatedly said they are waiting for additional answers from Boeing and have at time faulted the quality of submissions from the planemaker since the plane was grounded in March after two fatal crashes killed 346 people.

“We’ve had conversations about the importance of making sure that we are looking at complete documentation and not piecemeal documentation,” FAA Administrator Steve Dickson told Reuters in September. “It’s really better to be very methodical and very detailed rather than try to rush a partially completed product and then say, ‘We’ll get back to you with the rest of it.’”

Boeing has repeatedly said it is working with regulators to safely return the plane to service and acknowledged last week it would not occur until 2020.

Dickson said last week there are nearly a dozen milestones that must be completed before the MAX returns to service. Approval is not likely until at least February and could be delayed until March, U.S. officials told Reuters last week.

American Airlines Group Inc <AAL> and Southwest Airlines Co <LUV> have canceled flights into April because of the grounding.

(Reporting by David Shepardson; Editing by Nick Zieminski)

Boeing Statement Regarding 737 MAX Production

December 16, 2019 / WIL BALDWIN

Boeing suspends 737 MAX production starting in January due to certification in 2020
Reduced production output enables prioritization of stored aircraft delivery
No layoffs or furlough expected at this time

Safely returning the 737 MAX to service is our top priority. We know that the process of approving the 737 MAX’s return to service, and of determining appropriate training requirements, must be extraordinarily thorough and robust, to ensure that our regulators, customers, and the flying public have confidence in the 737 MAX updates. As we have previously said, the FAA and global regulatory authorities determine the timeline for certification and return to service. We remain fully committed to supporting this process. It is our duty to ensure that every requirement is fulfilled, and every question from our regulators answered.

Throughout the grounding of the 737 MAX, Boeing has continued to build new airplanes and there are now approximately 400 airplanes in storage. We have previously stated that we would continually evaluate our production plans should the MAX grounding continue longer than we expected. As a result of this ongoing evaluation, we have decided to prioritize the delivery of stored aircraft and temporarily suspend production on the 737 program beginning next month.

We believe this decision is least disruptive to maintaining long-term production system and supply chain health. This decision is driven by a number of factors, including the extension of certification into 2020, the uncertainty about the timing and conditions of return to service and global training approvals, and the importance of ensuring that we can prioritize the delivery of stored aircraft. We will continue to assess our progress towards return to service milestones and make determinations about resuming production and deliveries accordingly.

During this time, it is our plan that affected employees will continue 737-related work, or be temporarily assigned to other teams in Puget Sound. As we have throughout the 737 MAX grounding, we will keep our customers, employees, and supply chain top of mind as we continue to assess appropriate actions. This will include efforts to sustain the gains in production system and supply chain quality and health made over the last many months.

We will provide financial information regarding the production suspension in connection with our 4Q19 earnings release in late January.

GM Loans $40 Million to Firm to Acquire, Retool Shuttered Lordstown, Ohio, Factory

December 9, 2019 / WIL BALDWIN

FILE PHOTO: The GM logo is seen at the General Motors Lansing Grand River Assembly Plant in Lansing.

WASHINGTON (Reuters) – General Motors Co <GM> confirmed on Monday it agreed to loan $40 million to an electric vehicle start-up to facilitate the acquisition of its shuttered Lordstown Assembly plant in Ohio.

Lordstown Motors Corp, which is 10% owned by Workhorse Group Inc <WKHS>, bought the plant and equipment for $20 million in November as part of its ambitious plan to begin building electric pickup trucks by the end of 2020.

The loan agreement, which was reported earlier Monday by the Business Journal in Youngstown, was filed in Trumbull County last week.

Lordstown Motors has been working on the engineering of the new truck, “Endurance”, and hired Rich Schmidt, a former director of manufacturing at Tesla Inc, as chief production officer.

“We structured the sales agreement to help support Lordstown Motors’ launch plans for the Endurance pickup,” GM spokesman Jim Cain said, who added it “allows them to take possession of the plant and to cover some operating expenses while they undertake their capital raise.”

GM is not investing in the venture, but Cain said GM financing could rise to $50 million.

The fate of the sprawling northeastern Ohio plant became a political lightning rod after GM announced its planned closure in November 2018, drawing condemnation from U.S. President Donald Trump and many U.S. lawmakers.

Lordstown CEO Steve Burns told Reuters last month he hopes to have pre-production prototypes coming off the assembly line by April and to start production by November 2020 with an initial workforce of 400 hourly workers.

Burns said last month the company hopes to raise more than $300 million, the Business Journal reported. Burns told Reuters it retained Ohio investment bank Brown Gibbons Lang & Co in its capital fundraising effort.

GM and South Korea’s LG Chem <051910.KS> said Thursday they will invest $2.3 billion to build an electric vehicle battery cell joint venture plant in Ohio which will be one of the world’s largest battery facilities.

The plant, to be built near the Lordstown complex, will employ more than 1,100 people, the companies said.

As part of the Lordstown sale, GM has the option to lease land near the assembly plant that it could use for the battery plant.

(Reporting by David Shepardson; Editing by Sonya Hepinstall)

Former Boeing Employee Who Warned of 737 Problems to Testify

December 9, 2019 / WIL BALDWIN

WASHINGTON, Dec 9 (Reuters) – A former Boeing Co employee who warned of problems with 737 production will testify on Wednesday at a U.S. House hearing on the Federal Aviation Administration review of the grounded 737 MAX.

The aircraft has been grounded since March after two fatal crashes in five months killed 346 people. Federal officials say the FAA is not expected to authorize the plane to fly until January at the earliest.

Former Boeing employee Edward Pierson, who had worked as a senior operations manager in the flight test and evaluation unit, will testify before the U.S. House Transportation and Infrastructure Committee, the panel said in a notice.

Pierson’s concerns were referenced at an Oct. 30 hearing — though he had not been named previously.

“All my internal warning bells are going off and for the first time in my life, I’m sorry to say that I’m hesitant about putting my family on a Boeing airplane,” Pierson wrote to Boeing management in mid-2018 before the first crash, according to an email obtained by the committee. He warned “the alternative of rushing to build is far riskier.”

Boeing spokesman Gordon Johndroe said Monday that “although Mr. Pierson did not provide specific information or detail about any particular defect or quality issue, Boeing took his concerns about 737 production disruption seriously.” He added that after Pierson retired and raised the issue again as recently as this year “those concerns received renewed scrutiny at the highest levels of the company.”

Johndroe added “the suggestion by Mr. Pierson of a link between his concerns and the recent MAX accidents is completely unfounded.”

Pierson could not immediately be reached on Monday.

Representative Albio Sires, a Democrat, on Oct. 30, questioned Boeing CEO Dennis Muilenburg about concerns raised by a Boeing employee about Boeing’s 737 production and his recommendation that production be halted. Sires said the employee wrote directly to Muilenburg in December 2018 after he had retired.

Johndroe confirmed Monday Pierson was the employee referenced by Sires.

“He raised some good concerns. We went back and took a look at his concerns and in some cases we identified areas where we thought his issues had already been addressed,” Muilenburg said at the hearing. Boeing did not slow production after Pierson’s concerns.

FAA Administrator Steve Dickson, FAA Aircraft Certification Service Executive Director Earl Lawrence and a member of the FAA’s Technical Advisory Board, Matt Kiefer, as well as former FAA employee G. Michael Collins will also testify.

(Reporting by David Shepardson; Editing by Dan Grebler and Lisa Shumaker)

New Amtrak Acela Trains Stimulate Nationwide Economy

December 7, 2019 / WIL BALDWIN

With parts from nearly 250 suppliers, Alstom trainset production creates 1,300 new jobs

HARVEY, Ill. – The Amtrak partnership with Alstom to produce the next generation of Acela trains to move customers at higher speeds and more comfort between Boston and Washington is also boosting businesses nationwide. Today, Amtrak and Alstom thanked workers at LB Steel in Illinois for building wheel assemblies (known as “bogies” or “trucks”) and other components.

“While these new trains will provide world-class accommodations for customers traveling in the Northeast, this production will benefit communities across the country by creating jobs and stimulating local economies,” said Amtrak Executive Vice President Roger Harris, who led the visit to the factory south of Chicago. “The fastest trains in the hemisphere – at speeds up to 160 mph – will ride on the work done here in Harvey at LB Steel.”

Alstom is using parts manufactured by nearly 250 suppliers in 27 states, with 95 percent of the components produced domestically. More than 1,300 new jobs will be generated in nearly 90 communities across the United States to support production, including the creation of new, sustainable, high-tech, engineering and manufacturing jobs in New York.

“We are proud to have been selected by Amtrak, not only to design and build the new Avelia Liberty high speed trainsets, but also to provide long-term technical support, and supply spare components and parts for the maintenance of the new trains.,” said Michael MacDonald, Site Managing Director for Alstom in Hornell, N.Y., who also participated in the news event south of Chicago. “Alstom is partnering with suppliers across the country for this project, and the emergence of a high-speed rail manufacturing industry here in the U.S. is becoming a reality.”

The trains are being produced at Alstom’s Hornell facility, which is undergoing a massive investment and transformation to build the 28 high-speed trainsets for Amtrak. One of three new structures has been built to accommodate fleet manufacturing and testing and a new bridge has been built to extend the site’s current test track to accommodate higher speeds.

The new trains are scheduled to enter service in the Northeast Corridor in 2021 and will accommodate nearly 25 percent more customers while continuing the spacious, high-end comfort of the current Acela service that customers enjoy today. Each train will feature modern amenities such as improved Wi-Fi access, personal outlets, USB ports and adjustable reading lights.

The new Acela trains are part of an Amtrak plan to modernize and upgrade our fleet. Last year, Amtrak refreshed the interiors of the current Acela trains and Amfleet I railcars and announced plans to acquire 75 new locomotives for Amtrak’s long distance and state-sponsored services. This year, Amtrak performed similar work on Amfleet II railcars and announced plans to start next year to refresh Superliner cars used on long distance services. Refreshing of Horizon railcars in the Amtrak Midwest^SM network is also now underway with state partner support.

New high-speed Acela train sets for the Northeast Corridor when they enter service in 2021. Check out the first prototype (still under construction) being assembled at Alstom’s Hornell, New York facility.

Airbus Faces Delivery Challenge, Poised to Win Jet Order Race

December 5, 2019 / WIL BALDWIN

PARIS, Dec 5 (Reuters) – Airbus must hand a record number of aircraft to customers in December to meet delivery goals, company data showed on Thursday, and is all but certain of winning an annual order race against Boeing.

The European planemaker has been facing production snags in its best-selling A321neo jet, due in part to the introduction of a complex new flexible cabin, but has said it is confident of meeting a goal of 860 jets in 2019, revised down from 880-890.

To reach that target it must deliver 135 jets in December, beating a previous record of 127 December deliveries by 6%.

Airbus delivered 77 aircraft in November to reach 725 for the year so far, according to Thursday’s progress report.

Airbus has a track record of achieving a late surge in deliveries, though it is also working to spread deliveries more evenly over the year in future to smooth earnings and avoid quality problems that can creep in when it is working flat out.

Whether or not it meets targets, Airbus is set to regain the crown as the world’s largest commercial plane producer this year as U.S. rival Boeing approaches nine months without deliveries of its 737 MAX, grounded after two crashes.

Boeing is expected to jump back into the lead next year as projected deliveries include 737 MAX jets parked during the grounding, while remaining ahead on larger jets, but the timing of the 737 MAX return to service depends on global regulators.

Airbus is also on course to win an annual order contest between the plane giants after booking orders for 222 aircraft in November, driven mainly by last month’s Dubai Airshow.

Emirates ordered 50 A350-900 jets at the show as part of a fleet shake-up that also saw the world’s largest wide-body operator cut a remaining order for A380s and reduce its requirement for Boeing 777X jets, while adding the Boeing 787.

Airbus sold a total of 940 jets in January-November, or 718 after cancellations, leaving it well ahead of Boeing, whose year has been derailed by the grounding of the 737 MAX. In the latest period for which data is available, Boeing sold 180 jets in the first nine months or 45 after cancellations.

The latest figures were released days after Airbus won a sale of 50 A321XLR jets to United Airlines, narrowing the potential market for a mid-market plane that Boeing has been studying, while slowing those discussions during the MAX crisis.

United also delayed delivery of 45 A350s by several years to 2027 and beyond. UK analysts Agency Partners said on Thursday that this could put pressure on A350 output in coming years.

(Reporting by Tim Hepher; Editing by Giles Elgood and Andrew Heavens)

Daimler to Ax at Least 10,000 Jobs in Latest Car Industry Cuts

November 30, 2019 / WIL BALDWIN

FRANKFURT (Reuters) – Daimler said on Friday it will cut at least 10,000 jobs worldwide over the next three years, following others in the industry as they cut costs to invest in electric vehicles while grappling with weakening sales.

It marks the third announcement on cost cuts this week by a major German car company as automakers seek to fund huge investments into cleaner and self-driving technologies while demand in China, their biggest market, is falling and a trade war between Washington and Beijing is curbing economic growth.

“The automotive industry is in the middle of the biggest transformation in its history,” Daimler said in a statement.

Daimler, the owner of Mercedes-Benz, revealed the 3% cut in its workforce after reaching an agreement on its plans with labor unions.

They have agreed on a variety of measures to cut costs and jobs, including expanding part-time retirement and a severance program to be offered in Germany. The company is also cutting 10% of worldwide management positions.

Staff reductions would be in the low five-digits, or at least 10,000 people, according to Wilfried Porth, a board member in charge of human resources. The company employed 304,680 staff at the end of the third quarter.

Plans laid out by Daimler in November showed the company aimed to cut staff costs by around 1.4 billion euros ($1.54 billion) by the end of 2022.

The announcement comes days after Volkswagen’s <VOWG_p.DE> luxury car unit Audi said it would cut up to 9,500 jobs or one in ten staff by 2025, freeing up billions of euros to fund its shift toward electric vehicle production.

Also this week, BMW said that its management and labor had reached an agreement on measures to reduce bonus and other pay schemes for staff to cut costs.

Car suppliers Continental and Osram have also announced staff and cost cuts.

Daimler has repeatedly cut its profit outlook over recent months, partly to cover a regulatory crackdown on diesel emissions but also because of a slowing auto market.

Group operating profit will be “significantly lower” than a year ago, the company said last month.

Other measures to reduce staffing costs include offering shorter working weeks.

Agreements in place to prevent forced redundancies in Germany until 2029 will remain in place, Daimler said.

The workforce needs a clear strategy for the future, said Michael Brecht, chairman of Daimler’s works council. “A reduction in capacity must not be carried out on the backs of the employees,” he said.

(Editing by Elaine Hardcastle)

The Daimler logo is seen before the Daimler annual shareholder meeting in Berlin

Airbus Considering Production of Hybrid Airplane by 2035

November 30, 2019 / WIL BALDWIN

HAMBURG (Reuters) – Airbus <EADSY> is considering producing a hybrid plane by 2035 as it strives for a low emission aircraft, its chief executive said.

CEO Guillaume Faury, speaking to journalists on Thursday evening in comments embargoed for Friday, said that the plans were at an early stage.

(Reporting by Jan C. Schwartz; Writing Tom Sims; Editing by Riham Alkousaa)

Archives