Tag: expand (Page 2 of 6)

Rex Group member to take delivery of 9th De Havilland Dash 8-400NG

August 29, 2023 / WIL BALDWIN

National Jet Express (NJE), a member of the Rex Group, will shortly take delivery of another De Havilland Dash 8-400NG ‘Next Generation’, fitted with 82 seats.

This will be the ninth Dash 8-400NG to join the NJE fleet and the second to be deployed to support and grow NJE’s long term contract with BHP Mitsubishi Alliance (BMA) after starting operations for the mining giant on 1 July, 2023.

It will enter service in October and operate additional flights to the mining community of Moranbah in the Bowen Basin, 1000 kilometres north of Brisbane.

NJE is also in the advanced stages of negotiation for two further contracts in the mining and construction industries, which are expected to see Dash 8-400NG services expand across other areas of Queensland.

Cabo Verde Airlines Debuts Its First Boeing 737 MAX

July 20, 2023 / WIL BALDWIN

Praia, Cape Verde, July 20, 2023 – Boeing [NYSE: BA] and Cabo Verde Airlines today celebrated the delivery of the airline’s first fuel-efficient 737 MAX jet with a special event at its home base with officials and employees. As part of its new “take-off” rebranding, the airline’s 737-8 will reconnect the Cape Verdean diaspora and boost tourism for the island nation from Africa, Europe, North America and South America.

Cabo Verde Airlines connects four continents with non-stop flights from its hubs in Praia and Sal. The 737-8 is part of the airline’s new “take-off” relaunch strategy. It aims to renew its fleet and expand its network to previously operated routes following the pandemic.

The 737 MAX airplane family delivers enhanced efficiency, improved environmental performance and increased passenger comfort to the single-aisle market. Powered by CFM International LEAP-1B engines and advanced technology winglets, the 737 MAX reduces fuel use and emissions by 20% compared to airplanes it replaces.

National Jet Express Takes Off From New Brisbane Base

July 8, 2023 / WIL BALDWIN

National Jet Express (NJE), a Rex Group company, has today firmed up its bold ambition to expand its footprint in the Queensland charter and mining market. NJE today took passengers to the skies for the first time in Queensland, with flight NC344 departing Brisbane at 0700 local time for Moranbah. This comes after NJE was successful in winning a contract to provide air services for BHP Mitsubishi Alliance (BMA).

httpswww.rex_.com_.auViewerpage1

httpswww.rex_.com_.auViewerpage2

American Airlines to Expand Embraer Fleet

February 18, 2022 / WIL BALDWIN

São José dos Campos, Brazil, February 15, 2022 – American Airlines has signed a firm order with Embraer (NYSE: ERJ) for three new E175s. The aircraft will be operated by American’s wholly owned subsidiary, Envoy Air. With deliveries to be completed this year, Envoy’s fleet of E175s will grow to over 100 aircraft by the end of 2022. The contract value is USD 160.2 million at current list prices and will be included in Embraer’s 2021 fourth quarter backlog.

“Reaching the century mark of 100 E175s with American Airlines and Envoy is truly a moment to savor. We thank American Airlines and Envoy for their sustained partnership with Embraer, which began back in 1998,” said Mark Neely, Vice President Sales and Marketing for The Americas, Embraer Commercial Aviation. “It’s hard to exaggerate the impact this hardworking aircraft has every day, delivering essential connectivity across the US market. The E175 is the backbone of the US regional network, with over 600 aircraft sold, and 86% market share since 2013.”

“Our incredible journey with Embraer began almost 25 years ago with the ERJ 145. Our partnership continues to grow today with the E175s, the core of our fleet. Not only are our customers happy with the aircraft, but the jet’s outstanding performance has allowed us to continue to provide excellent service to American Airlines,” said Pedro Fábregas, President & CEO of Envoy. “We look forward to receiving these three new aircraft later this year as we continue to expand our growing network.”

Aviation Capital Group Commits to 20 A220’s and 40 A320neo Family Aircraft

December 30, 2021 / WIL BALDWIN

Toulouse, France 30 December 2021 – Global full-service aircraft lessor Aviation Capital Group (ACG), wholly owned by Tokyo Century Corporation, has signed a Memorandum of Understanding (MoU) with Airbus (OTC: EADSY) for 20 A220’s and a firm contract for 40 A320neo Family aircraft, of which five are A321XLR’s.

The A220 is the only aircraft purpose-built for the 100-150 seat market and brings together state-of-the-art aerodynamics, advanced materials and Pratt & Whitney’s latest-generation PW1500G geared turbofan engines. Featuring a 50% reduced noise footprint and up to 25% lower fuel burn per seat compared to previous generation aircraft, as well as around 50% lower NOx emissions than industry standards, the A220 is a great aircraft for regional as well as long distance routes operations.

With this order ACG is supporting the recently launched multi-million dollar ESG fund initiative by Airbus that will contribute towards investment into sustainable aviation development projects.

Vietjet Selects Rolls-Royce TotalCare to Support Trent 700 Powered A330 Aircraft

November 9, 2021 / WIL BALDWIN

Vietnamese airline Vietjet Aviation will operate Rolls-Royce (OTC: RYCEY) Trent 700 engine-powered Airbus A330 aircraft in its fleet. As part of the airline’s strategic fleet decision, these will be the first widebody aircraft to join its operations as it expands its network into long-haul operations. The selection is supported by a TotalCare long-term aftermarket engine maintenance agreement. The first aircraft is expected to enter into service in November 2021.

The Trent 700 is the only engine specifically designed for the A330 and is widely recognised for its outstanding efficiency and reliability. Since its launch in 1995, the Trent 700 has dominated the A330 fleet with more than 60 per cent market share and has logged more than 60 million hours in service to date.

Vietjet, which is Vietnam’s largest airline in terms of the total number of passengers transported domestically and the country’s second largest airline in terms of fleet size, currently has a fleet of 90 narrow-body aircraft. The airline’s ability to stay agile and financially resilient in 2020 has allowed Vietjet to navigate successfully through the market headwinds due to Covid-19 pandemic.

Supporting Vietjet’s business ambitions with the addition of its fleet for long-haul widebody operations, the Trent 700 delivers the best balance of attributes to achieve the maximum capability and efficiency on the A330. With a wide fuselage, well-established technology and sound economics, the airline aims to invest in additional A330 widebody aircraft in the next few years as part of its strategic fleet expansion plan.

Virgin Australia Resumes Service Between Hobart and Perth

October 30, 2021 / WIL BALDWIN

Virgin Australia continues to expand its domestic network in time for summer, with the airline today kicking off its services between Hobart and Perth.

Flights between the two cities will operate three times per week, allowing for up to 4,200 passengers to travel each month.

The news follows last week’s commencement of services between Hobart and Adelaide which is now operating four times per week and allowing up to 5,600 additional passengers to fly each month.

Virgin Australia experienced a 90 per cent increase in Tasmanian bookings compared to the previous week after the announcement of new services to the Apple Isle and the Tasmanian Government’s release of a recovery roadmap.

Since September Virgin Australia has added 12 additional domestic routes to its network and is scheduled to resume flights to Fiji in December, followed by Bali and New Zealand from early next year.

Re-introduced services

ROUTE	FREQUENCY	SEATS PER MONTH	COMMENCEMENT DATE
Hobart – Perth / Perth – Hobart (Seasonal service only)	3 services per week(Monday, Friday, Sunday)	4,200	29 October 2021

New services

ROUTE	FREQUENCY	SEATS PER MONTH	COMMENCEMENT DATE
Hobart – Adelaide / Adelaide – Hobart	4 services per week(Monday, Wednesday, Friday, Sunday)	5,600	20 October 2021

Embraer Eve and Helipass Partner to Expand UAM Operations in France and Beyond

September 20, 2021 / WIL BALDWIN

Melbourne, Florida, September 20, 2021 – Embraer (NYSE: ERJ) Eve Urban Air Mobility Solutions and Helipass, SAS, today announced a new collaboration to accelerate and deploy electrical vertical takeoff and landing (eVTOL) aircraft, also known in the market as EVA (Electrical Vertical Aircraft), across France and Europe. The partnership aims to fly Eve’s electric aircraft for a total of 50,000 flight hours per year. This could lead to an optional increase of 100,000 annual flight hours across Helipass’ network.

Helipass plans to open digital bookings on its platform to offer an innovative and seamless user experience to customers throughout its network. To support the expansion of this partnership, Eve will work with Helipass to develop training, on-site support, and technical publications to facilitate the launch of EVA commercial operations.

Following the commercial introduction of the EVA, which is planned for 2026, both companies will endeavor to launch Eve’s EVA aircraft across Helipass’ markets. These flights will include sightseeing, city and airport transfers, as well as a growing on-demand service.

Both parties will look into growing the service beyond this agreement to include additional use cases, as well as the requisite services needed to support the scalability of Urban Air Mobility (UAM) products in Helipass’ core markets.

Lockheed Martin and NASA executives officially opened the STAR Center in Florida on July 15.

Lockheed Martin Opens Orion Spacecraft Advanced Manufacturing Facility

July 15, 2021 / WIL BALDWIN

TITUSVILLE, Florida, July 15, 2021 /PRNewswire/ — Lockheed Martin [NYSE: LMT] opened its Spacecraft Test, Assembly and Resource (STAR) Center today. The STAR Center features business and digital transformation innovations that will expand manufacturing, assembly and testing capacity for NASA’s Orion spacecraft program and ultimately, future space exploration.

Lockheed Martin currently assembles the Orion spacecraft for the Artemis I and II Moon missions at the nearby Neil Armstrong Operations and Checkout (O&C) building at NASA’s Kennedy Space Center. The addition of the STAR Center provides much-needed space for the new production phase of Orion, allowing future Orion spacecraft – starting with the Artemis III mission – to be built faster.

Lockheed Martin acquired the building that formerly housed the Astronaut Training Experience attraction and spent 18 months and nearly $20 million renovating and modernizing the 55,000 square-foot space into a digitally-transformed factory of the future.

Mitsubishi Heavy Industries to Expand Metal 3D Printing Services

July 10, 2021 / WIL BALDWIN

Mitsubishi Heavy Industries Machine Tool Co., Ltd., a group company of Mitsubishi Heavy Industries, Ltd. (MHI) based in Ritto, Shiga Prefecture, will offer expanded services in metal 3D　printing services commencing on July 15, including prototype production and contract production by metal 3D (three-dimensional) printers applying laser-based Metal Additive Manufacturing (AM) technologies. In addition to its previously offered Directed Energy Deposition (DED) type metal 3D printers for large-scale parts, the Company will newly add services using binder jetting (BJT) metal 3D printers for small-scale parts. The expanded service lineup will enable manufacture of a full range of metal parts, from small components of 1mm size to ultra-large-scale parts exceeding 1 meter.

The addition to MHI Machine Tool’s lineup is the DMP2500 metal 3D printer developed by Digital Metal, a group company of Hogänäs of Sweden. The DMP2500’s BJT technology not only enables extremely precise manufacturing but also is engineered especially for high-volume production. Currently, MHI Machine Tool has provided metal printing services applying unique DED technology of “LAMDA” AM systems; now, with the introduction of a different type of printer, the Company can respond to a broad range of metal 3D print needs and propose and provide the optimal manufacturing method and equipment for each parts.

MHI Machine Tool concluded a contract with Digital Metal in July 2020 on marketing its DMP2500 and other metal 3D printers in Japan. By adding these BJT type systems to its own sales lineup, MHI Machine Tool will be in a position to offer a broad portfolio of not only sales but also after-sales services.

While metal 3D printers are receiving attention for their innovative advances to production processes, they also present challenges relating to the difficulty of their production and quality assurance, etc. With the new expansion of services, MHI Machine Tool will focus on providing solutions relating to additive manufacturing, including provision of related expertise, to accelerate early adaptation to production parts.

Going forward, MHI Machine Tool will develop its metal printing services structure spanning from small-scale high-precision to ultra-large-scale items, enabling the Company to respond to a broad wide-range of prototype production needs and contract production. In these ways, MHI Machine Tool will encourage manufacturers to expand into manufacturing parts using metal 3D printers and contribute to the industrial supply chain as a whole.

Archives