Tag: Garmin (Page 2 of 4)

Garmin Certifies the GFC 600 Digital Autopilot in Select Pilatus PC-12 Aircraft

June 22, 2021 / WIL BALDWIN

Garmin International Inc. (Nasdaq: GRMN), a unit of Garmin Ltd., today announced it has received Federal Aviation Administration Supplemental Type Certificate approval for the GFC 600 digital autopilot in select Pilatus PC-12/41 and PC-12/45 aircraft. The GFC 600 digital autopilot is optimized to meet the demands of turbine aircraft, delivering superior in-flight characteristics and operational capabilities such as Vertical Navigation (VNAV), automatic Course Deviation Indicator (CDI) switching when paired with a GTN Series navigator, enhanced go-around capability and much more.

The GFC 600 certification for the PC-12 boasts superior integration with a TXi flight display configured as a primary flight display (PFD) to provide owners and operators an advanced autopilot solution that considers the wide range of speed and performance characteristics of these turbine aircraft. Further, the GFC 600 incorporates solid-state attitude with robust self-monitoring capabilities to provide superior autopilot performance, greater reliability and renowned safety benefits. Environmentally hardened autopilot servos designed for harsh operating conditions contain brushless DC motors offering improved performance and reducing maintenance requirements when compared to decades-old servo designs on the market today. Standard mark-width (6.25-inch) design of the GFC 600 mode controller ensures the autopilot controller allows for routine installation into the aircraft’s avionics stack.

Going beyond traditional autopilot capabilities such as altitude hold, vertical speed and heading modes, the GFC 600 also includes altitude preselect, VNAV, Level Mode with the LVL button, underspeed and overspeed protection and more. Pilots can also select, couple and fly various instrument approaches, including GPS, ILS, VOR, LOC and back course approaches when paired with a compatible GPS navigator.

Additional benefits of the GFC 600 digital autopilot for turbine aircraft include:

Premium functions and advanced capabilities such as altitude pre-select on a TXi flight display configured as a PFD and indicated airspeed hold mode;
Built-in GPS roll steering capability eliminates the need for external roll steering converters, allowing for smoother navigation tracking when installed with a compatible navigator;
Yaw Damping (YD) mode minimizes yawing oscillations while also helping to maintain coordinated flight;
Flight Director command bars displayed on a TXi flight display configured as a primary flight display (PFD);
Coupled ‘go-arounds’ during missed approach sequencing with a remotely-installed go-around button that commands the Flight Director to display the appropriate pitch attitude required for the missed approach procedure and activates a loaded missed approach when paired with a
GTN 650/750 or GTN 650Xi/750Xi navigator;
Control wheel steering allows the pilot to adjust pitch, roll, altitude hold, vertical speed or airspeed references using the control yoke while the autopilot is engaged.

Garmin G3000 Integrated Flight Deck Selected by Joby Aviation for eVTOL Aircraft

February 10, 2021 / WIL BALDWIN

OLATHE, Kan./Feb. 10, 2020/Business Wire – Garmin^® International, Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced a long-term agreement to provide the state-of-the-art
Garmin G3000^® integrated flight deck to Joby Aviation for their revolutionary all-electric vertical takeoff and landing (eVTOL) aircraft, which is expected to commence commercial operations in 2024. Garmin has decades of experience deploying certified avionics solutions to new markets and this is continued with the touchscreen G3000 integrated flight deck for eVTOL aircraft in the Urban Air Mobility (UAM) market. The G3000 integrated flight deck has amassed extensive field service history, and with this derivation of the system into the eVTOL segment, it leverages that proven experience while offering advanced integration functionality in a compact design with unparalleled capabilities.

The modular Garmin G3000 integrated flight deck boasts light weight and vibrant high-resolution flight displays that support navigation, communication and flight sensor solutions and integrates seamlessly with Joby’s aircraft systems. Specifically tailored to meet the needs of eVTOL aircraft, the G3000 system that will be featured in Joby’s eVTOL aircraft delivers enhanced capabilities to optimize their air mobility service through tight integration with the vehicle mission computer and tailoring of flight guidance display indications. Further, the G3000 will be architected to provide the ability to efficiently facilitate future system upgrades as the Advanced Aerial Mobility (AAM) industry continues to evolve.

Joby Aviation is a California headquartered company developing an all-electric vertical takeoff and landing aircraft. After more than a decade of engineering and development, Joby intends to operate the aircraft as a fast, quiet and affordable air mobility service as early as 2024. The piloted, zero-emissions aircraft, will be capable of transporting four passengers up to 150 miles on a single charge, with a top cruising speed of 200 mph. It is designed to help reduce urban congestion and accelerate the shift to sustainable modes of transit. Designed for daily life, the aircraft lands vertically and provides flexibility and versatility to serve nearly any community.

Cirrus Aircraft Launches Limited Edition to Commemorate 8,000th Delivery

February 6, 2021 / WIL BALDWIN

Cirrus Aircraft today unveiled a new Limited Edition aircraft to commemorate the delivery of its 8,000^th SR Series aircraft later this year – the 8000 Limited Edition SR Series. Inspired by the company’s rich history of designing and building aircraft that inspire people to experience the world through personal aviation, the new design features bold colors and unapologetic accents on the exterior and interior.

Echoing the momentum of the runway lines as you prepare for take-off, the 8000 Limited Edition SR Series features an exterior that is impossible to miss. The design is accentuated by an industry-first Volt wing paint scheme, commanding attention on the ground and in the air. The unmistakable graphics and colors carry through into the interior with Volt stitching on the seats and embroidery on the door, and luxury perforated leather on the seats and throttle. In addition to the exciting new design, each of the limited run of eight (8) exclusive 8000 Limited Edition aircraft will be delivered along with a curated series of gifts and events for the new owners.

Cirrus Aircraft’s first high-performance SR Series airplane – the SR20 – was delivered in 1999 and transformed general aviation with intuitive avionics, game-changing performance and revolutionary safety systems, including the Cirrus Airframe Parachute System® (CAPS®). The SR Series has been the world’s best-selling single-engine piston for 18 years in a row, with a portfolio that includes the SR20, SR22 and the turbocharged SR22T. Later this year, the company will deliver its 8000^th SR Series aircraft and exceed 11 million flight hours in more than 60 countries around the world.

The sixth generation SR Series – G6 SR Series – quickly reaffirmed Cirrus Aircraft’s position as the industry leader and, once again, raised the benchmark for high performance, single-engine aircraft. The 2017 G6 SR Series launched the high-speed Cirrus Perspective+^TM by Garmin® flight deck, Cirrus Spectra^TM wingtip lighting, premium cockpit connectivity solutions and more. In the following years, the G6 SR Series was further enhanced with flight deck upgrades and new features in connectivity, including the Cirrus Aircraft mobile app powered by Cirrus IQ™ for access to real-time aircraft data from virtually anywhere in the world, flight data streaming and the ability to text or call contacts on the ground with FlightStream 510.

The 8000 Limited Edition SR Series was imagined and designed by the Xi Design Studio – Cirrus Aircraft’s talented in-house personalization team. The Limited Edition continues to expand the Xi Design Studio’s ability to incorporate luxury automobile-inspired details, handcrafted finishes and customization defined and inspired by the owner’s imagination.

Garmin Gets Approval for GFC 600 Digital Autopilot in Select King Air C90 and E90 Aircraft

January 22, 2021 / WIL BALDWIN

OLATHE, Kan./Jan. 21, 2020/ – Garmin^® International Inc., a unit of Garmin Ltd., today announced it has received Federal Aviation Administration (FAA) Supplemental Type Certificate (STC) approval for the
GFC^™ 600 digital autopilot in select Beechcraft King Air C90 aircraft and E90 aircraft¹. The GFC 600 digital autopilot is optimized for turbine aircraft, delivering superior in-flight characteristics and new operational capabilities such as Vertical Navigation (VNAV), automatic Course Deviation Indicator (CDI) switching when paired with a GTN Series navigator, enhanced go-around capability and much more.

The GFC 600 certification for the Beechcraft King Air C90 and E90 provides owners and operators an autopilot upgrade that boasts superior integration potential with G600 and G600 TXi^™ flight displays, the
GI 275 electronic flight instrument, as well as the GTN^™ and GTN Xi Series of navigators. The self-contained autopilot controller incorporates backlit keys and a bright, sunlight readable display that depicts autopilot status and mode selection. An intuitive built-in control wheel also provides convenient adjustment of aircraft pitch, airspeed and vertical speed modes. When the level button is selected, the aircraft automatically returns to straight-and-level flight.

Environmentally hardened autopilot servos designed for harsh operating conditions contain brushless DC motors offering improved performance and reducing maintenance requirements when compared to decades-old servo designs on the market today. In addition, these servos are optimized for turbine aircraft by offering more torque to help better command and respond to control demands required of turbine aircraft.

Standard mark-width (6.25-inch) design of the GFC 600 mode controller ensures the autopilot controller allows for routine installation into the aircraft’s avionics stack. Autopilot mode annunciation is available on the G600 TXi touchscreen glass flight display, as well as the G600 flight display. The addition of an optional autopilot annunciator panel also displays the selected autopilot mode in the pilot’s primary field of view and retains an identical footprint of third-party autopilot annunciators on the market.

Garmin Honored with Consecutive On-Time Delivery Awards from Airbus Helicopters

January 20, 2021 / WIL BALDWIN

Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced it has received a 2020 On-Time Delivery Award from Airbus Helicopters, Inc. for its efficient performance related to product delivery. Garmin avionics are available as standard on select Airbus Helicopters, including the H125, H130, H135 and H145.

Each year, Airbus Helicopters, Inc. recognizes suppliers who stand out in performance, competitiveness and reliability. This is the second year in a row Garmin has won the On-Time Delivery Award for commitment and timeliness in delivering avionics to fulfill Airbus Helicopters Inc. production lines and customer orders.

“We are once again very proud to be recognized by Airbus with this prestigious award for our commitment to serve them and our mutual customers with the on-time delivery of our products,” said Carl Wolf, Garmin vice president aviation sales and marketing. “To again receive this award is truly humbling and ultimately would not be possible without the dedication of our entire Garmin team, in addition to the gratifying strategic relationship with Airbus Helicopters.”

Garmin avionics are available as standard on the Airbus H125, including the G500H TXi flight display,
GTN^™ 650 touchscreen navigator, GNC 255 nav/comm, GMA^™ 350c audio panel and the GTX^™ 335R remote-mount ADS-B Out transponder. The GTN 750, GNC 255 and GTX 335R are also available as standard on the H130, while the H135/H145 feature the GTN 750 and Flight Stream 510 as standard equipment.

This marks the third consecutive year Garmin has received an award from Airbus Helicopters, Inc. In 2018, Garmin was also recognized by Airbus Helicopters, Inc. as the Supplier of Excellence for its unmatched responsiveness and competitiveness in its support of the UH-72A Lakota helicopter program, and for its overall support at the Airbus Helicopters Inc. final assembly and completion center in Columbus, Miss.

Garmin Adds 4 New eLearning Courses for G1000 NXi Integrated Flight Deck

November 23, 2020 / WIL BALDWIN

– New courses include helicopter specific eLearning courses for G1000H NXi

Garmin^® International Inc., a unit of Garmin Ltd., is pleased to announce two new eLearning training courses for the G1000^® NXi, as well as two separate eLearning courses for the G1000H NXi integrated flight deck for helicopters. These training courses are available in a virtual eLearning format allowing pilots to learn at their own pace, with the G1000 NXi Fundamentals eLearning Course providing a foundational understanding of the system, while the G1000 NXi Essentials eLearning Course is focused on systems installed in high-performance piston and turbine engine aircraft. The two comprehensive eLearning courses for the G1000H NXi integrated flight deck titled G1000H NXi Fundamentals, and G1000H NXi Advanced-IFR, use scenario-based training to highlight helicopter-specific operations and are tailored for pilots new to the G1000H NXi system, in addition to those with experience wanting a deeper understanding of the system.

Core training topics
All four training courses build on a common core of training topics. These topics are common to all G1000 NXi and G1000H NXi systems but are tailored to the audience for each course. The topics include:

Primary Flight Display (PFD) and Multifunction Display (MFD) function
Audio Panel Features
Automatic Flight Control System
Hazard Avoidance Features
Safety Features
Abnormal Operations
Managing Databases
Operational Flight Scenario

Learn best-practices for G1000 NXi operational use

For those that are new to Garmin avionics, transitioning to advanced avionics, or perhaps want to refresh their understanding of the system, the G1000 NXi Fundamentals eLearning Course provides comprehensive training on the system designed for piston engine equipped aircraft. This course describes features of the system in detail and use a scenario to demonstrate how particular features function in different phases of flight in order to see this advanced system in action. In order to practice what you learned during this course, the Garmin G1000 NXi PC Trainer software is available for purchase online.

G1000 NXi for high-performance piston and turbine aircraft

For those operating high-performance piston or turbine-engine equipped aircraft, the G1000 NXi Essentials course presents best-practices for the G1000 NXi integrated flight deck by providing detailed training for pilots wanting to get the most out of the system. In addition to describing features in detail and showing how they can be used effectively in flight, scenario-based training demonstrates typical high-performance piston and turbine-engine aircraft operations, providing an opportunity to see the G1000 NXi system in full effect. For your specific or similar aircraft, the Garmin G1000 NXi PC Trainer software is available for purchase online, and provides the opportunity to take what you learned throughout the course and apply it. In addition to the core training topics, the G1000 NXi Essentials eLearning Course includes additional instruction on:

Vertical Navigation
Automatic Flight Control System
Advanced Features
User Waypoints
Managing Databases
Multiple Operational Flight Scenarios with different performance profiles

Build helicopter-specific system knowledge

The G1000H NXi Fundamentals course is designed for VFR helicopter pilots who are new to Garmin avionics, transitioning to advanced avionics, or perhaps want a refresher on the G1000H NXi. This allows the pilot to be comfortable with the avionics and maximize learning during valuable flight time. Learn how to take full advantage of the capabilities of the G1000H NXi system while gaining experience with operational use best practices. This virtual course allows pilots to learn at their own pace, details system features and provides a VFR flight scenario to show how these features are used in various phases of flight. Those that sign up for this course receive an additional scripted scenario for more practice through the Bell 407GXi G1000H NXi PC Trainer software, available for purchase online. The core training topics in the G1000H NXi Fundamentals eLearning Course have been tailored to helicopter-specific features and functionality, including differences for:

PFD and MFD function
Audio Panel Features
Hazard Avoidance Features
Operational Flight Scenario
Scenario-Based Exercise

Enhance IFR helicopter skills with G1000H NXi

The G1000H Advanced-IFR course provides a detailed look at the G1000H NXi system and illustrates best practices for operational use of the flight deck, with a focus on Instrument Flight Rules (IFR). The course uses phase of flight scenarios to demonstrate typical IFR helicopter operation, and depicts common practices to maximize the benefits of system features and capabilities. For helicopter pilots who fly search-and-rescue missions, emphasis on user waypoints are included in the course scenarios. Pilots can further practice what they learned throughout the course with one of the additional scripted scenarios provided for use with the purchase of the Bell 407GXi G1000H NXi PC Trainer software. Some helicopter-tailored training topics covered in the Advanced IFR eLearning Course include:

PFD and MFD function
Automatic Flight Control System
Hazard Avoidance Features
Advanced Features
User waypoints
Operational Flight Scenarios

Proceed through the course at a pace that works best

Available immediately after purchase using a computer or tablet device with internet access, pilots can navigate through the virtual course at their own pace. Assessments throughout the course validate knowledge obtained of critical items while documenting the learning process. With the ability to pause lessons as needed to return to the lesson later, this is a convenient option for any pilot. Also, pilots can retake specific lessons or even the entire course during the subscription period.

The G1000 NXi Fundamentals eLearning course is available now for $94.95 USD, and the G1000 NXi Essentials eLearning Course is now available for $145.95 USD. Also available is the G1000H NXi Fundamentals eLearning Course for $74.95 USD, as well as the G1000H NXi Advanced IFR eLearning Course is available for $94.95 USD. For aviation training needs, including purchasing one of these eLearning courses, please visit www.fly.garmin.com/training.

Garmin Announce Certification of G1000 NXi Upgrade in Piper Meridian

August 20, 2020 / WIL BALDWIN

Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced Federal Aviation Administration (FAA) certification and availability of the G1000 NXi upgrade for G1000-equipped Piper Meridian aircraft. The G1000 NXi integrated flight deck upgrade is available immediately for these aircraft through select Garmin dealers and features several new enhancements such as SurfaceWatch, visual approaches, geographical map overlay within the HSI and more.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200819005056/en/

State-of-the-art processors support faster map rendering and smoother panning throughout the G1000 NXi displays. The flight displays also initialize in seconds so pilots have immediate access to frequencies, flight plan data and more, saving valuable time in the cockpit. The G1000 NXi integrated flight deck also incorporates contemporary animations and LED back-lighting, offering increased display brightness and clarity, reduced power consumption and improved dimming performance.

– The G1000 NXi integrated flight deck boasts a comprehensive feature set with new and advanced capabilities. Unique features included as part of the G1000 NXi upgrade for the Piper Meridian include:SurfaceWatch runway monitoring technology, which provides visual and aural cues to help prevent pilots from taking off or landing on a taxiway, on a runway that is too short or on the wrong runway based on performance data entered during preflight.

– Visual approaches offer pilots enhanced guidance in visual flight conditions based on a three-degree glideslope from the threshold of the runway. Pilots can set customized minimums, select vectors or straight-in for the final approach intercept and fly a visual approach coupled with the autopilot.

– Geographical map overlay within the HSI supports the display of NEXRAD, Flight Information Service-Broadcast (FIS-B) weather, weather radar, SafeTaxiairport diagrams, traffic¹, terrain and more.

– Flight Stream 510 and Connext technology enables Database Concierge, the wireless transfer of aviation databases from the Garmin Pilot™ app on a mobile device to the G1000 NXi integrated flight deck. Flight Stream 510 also supports two-way flight plan transfer, the sharing of traffic, weather, GPS information and back-up attitude information.

– The G1000 NXi system supports the display of various Automatic Dependent Surveillance-Broadcast (ADS-B) In benefits via the GTX 345R transponder.

– Pilots can optionally overlay European Visual Reporting Points (VRPs) on the moving map, as VRPs are standard within the navigation database.

– Display of sectional charts, as well as IFR low/high enroute charts are available on the MFD.

– Smart Airspace highlights the airspace nearest the aircraft’s current altitude and de-emphasizes non-pertinent airspace.

– COM frequencies are decoded and displayed on the PFD for easier interpretation.

– Decoded Terminal Aerodrome Forecasts (TAFs) can be viewed on the MFD.

– Split-screen functionality allows pilots to view flight plans, charts and more simultaneously.

– An optional audio panel upgrade offers advanced features such as 3D Audio, auto squelch and Bluetooth connectivity.

The G1000 NXi integrated flight deck upgrade for existing G1000-equipped Piper Meridian aircraft is available immediately through select Garmin dealers. Meridian owners and operators can easily upgrade to the G1000 NXi with minimal aircraft down time and disruption of the panel as the displays preserve the same footprint and connectors, so panel modifications are not required. The upgraded components of the G1000 NXi also come with a two-year warranty, which is supported by Garmin’s award-winning avionics product support team.

Garmin Autoland Achieves EASA and FAA Certification on Daher TBM 940

August 6, 2020 / WIL BALDWIN

Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced European Aviation Safety Agency (EASA) and Federal Aviation Administration (FAA) certification of Autoland in the Daher TBM 940. The Garmin Autoland system is available as part of the G3000™ integrated flight deck and is capable of taking control and landing the aircraft without human intervention¹ in the event the pilot is unable to fly.

In the event of an emergency, the pilot or passengers on board the aircraft can activate Autoland to land the aircraft with a simple press of a dedicated button. Autoland can also activate automatically if the system determines it’s necessary. Once activated, the system calculates a flight plan to the most suitable airport, while avoiding terrain and adverse weather, initiates an approach to the runway and automatically lands the aircraft – without pilot or passenger intervention.

Autoland takes into account a breadth of information and criteria during an activation, including a wide range of performance, operational and environmental factors. The availability of a GPS approach with lateral and vertical guidance to the runway is also required when the system is considering various airports and runways. Even further, the system will automatically communicate with air traffic control (ATC), advising controllers and pilots operating near the aircraft of its location and its intentions.

Throughout an Autoland activation, the G3000 integrated flight deck provides passenger-centric visual and verbal communications in plain language so passengers in the aircraft know what to expect. The flight displays show the aircraft’s location on a map alongside information such as the destination airport, estimated time of arrival, distance to the destination airport and fuel remaining. Airspeed, altitude and aircraft heading are also labeled in an easy-to-understand format. Passengers also have the option to communicate with ATC by following simple instructions on the display using the touchscreen interface on the flight deck.

The Garmin Autothrottle system is used to automatically manage aircraft speed, engine performance and engine power so the aircraft can climb, descend or maintain altitude as needed during an Autoland activation. On approach to land, the system initiates a controlled descent to the airport. If the aircraft needs additional time to descend or slow down during the approach, the Autoland system initiates a standard holding procedure. When aligned with the runway, the landing gear and flaps are automatically extended and the aircraft continues its descent. On the runway, automatic braking is applied while tracking the runway centerline to bring the aircraft to a full stop. Engine shutdown is also automated so occupants can safely exit the aircraft.

At any time, a pilot can easily deactivate an Autoland activation. With a single press of the “AP” autopilot key on the autopilot controller or the autopilot disconnect button on the controls, an Autoland activation can be canceled. The flight display shows a message that confirms Autoland has been deactivated and in the event of an accidental deactivation, the system shows passengers how to reactivate Autoland if needed.

First Cessna Skycourier Twin Utility Turboprop Takes Flight

May 18, 2020 / WIL BALDWIN

Textron Aviation Inc., a Textron Inc. (NYSE:TXT) company, today announced the successful first flight of its new twin utility turboprop, the Cessna SkyCourier. The milestone flight is a significant step toward entry into service for the clean-sheet aircraft, and it kicks off the important flight test program that validates the performance of the Cessna SkyCourier.

“Today was an exciting day for our employees, our suppliers and our customers. The Cessna SkyCourier performed exactly as we expected, which is a testament to the entire team of men and women who worked together to prepare for this day,” said Ron Draper, president and CEO, Textron Aviation. “I’m proud of the way the team has persevered through disruptions caused by the COVID-19 global pandemic and remained focused on getting us to this point. The Cessna SkyCourier will be an excellent product in its segment due to its combination of cabin flexibility, payload capability, superior performance and low operating costs. Our customers will be very pleased with what they experience from this aircraft.”

The Cessna SkyCourier took off from the company’s east campus Beech Field Airport, piloted by Corey Eckhart, senior test pilot, and Aaron Tobias, chief test pilot. During the 2-hour and 15-minute flight, the team tested the aircraft’s performance, stability and control, as well as its propulsion, environmental, flight controls and avionics systems.

“We were very pleased with how the Cessna SkyCourier performed throughout its first flight,” Eckhart said. “It was particularly impressive to see how stable the aircraft handled on takeoff and landing. The Cessna SkyCourier already displays a high level of maturity in its flight characteristics, especially for a first flight. We were able to accomplish everything we wanted on this flight, and that’s an excellent start to the flight test program.”

The prototype aircraft, along with five additional flight and ground test articles, will continue to expand on performance goals, focusing on testing flight controls and aerodynamics.

Relentless capability

The Cessna SkyCourier, featuring Pratt & Whitney Canada PT6A-65SC engines, will be offered in various configurations including a 6,000-pound payload capable freighter, a 19-seat passenger version or a mixed passenger/freight combination, all based on the common platform.

The Cessna SkyCourier is designed for high utilization and will deliver a combination of robust performance and lower operating costs. Cessna SkyCourier will feature the popular Garmin G1000 NXi avionics suite and offer highlights such as a maximum cruise speed of up to 200 ktas and a maximum range of 900 nm. Both freighter and passenger variants of the Cessna SkyCourier will includer single-point pressure refueling as standard to enable faster turnarounds.

https://www.youtube.com/watch?v=uGcKM669tP4

British Airways Franchise Partner SUN-AIR Selects Garmin ADS-B solution for Dornier 328 aircraft

March 11, 2020 / WIL BALDWIN

Garmin is pleased to announce European Aviation Safety Agency (EASA) approval of an Automatic Dependent Surveillance-Broadcast (ADS-B) solution for the Dornier 328 jet and turboprop aircraft. SUN-AIR Aviation Group has selected a Garmin ADS-B solution for their entire fleet of 18 Dornier 328 aircraft that utilizes a Supplemental Type Certificate (STC) and “plug and play” installation kit from their certification partner Scandinavian Avionics, headquarters of The SA Group. This cost-effective Garmin ADS-B upgrade provides operators with an economical solution for complying with the ADS-B mandate in Europe.

“Garmin continues to lead the industry on a global scale with a broad range of ADS-B solutions that span all segments of aviation, including a wide-range of commercial, defense, regional and business aircraft,” said Carl Wolf, vice president of aviation sales and marketing. “We are thrilled to provide SUN-AIR with a technology solution that is cost-effective, easy to install and keeps them flying so they can continue to serve their valued customers.”

The ADS-B upgrade for the Dornier 328 is comprised of a pair of GTX 3000 ADS-B transponders and a GPS 3000, a high-integrity SBAS/WAAS position source, and a complete installation kit comprised of a pre-wired shelf, wire harness and consumption material. This solution is designed to easily interface to existing equipment on board the aircraft, reducing installation time and lowering the overall cost of compliance. Together, the GTX 3000 and GPS 3000 serve as a rugged, standalone ADS-B Out solution that meets the stringent demands of transport category aircraft around the globe.

“This Garmin ADS-B solution is an ideal upgrade for our aircraft because the installation design supports an abbreviated maintenance visit,” Kristoffer Sundberg, CEO SUN-AIR airlines. “For our workhorse fleet of aircraft, efficiency and minimal aircraft downtime are key, and Garmin and Scandinavian Avionics have addressed this with a straightforward upgrade.”

Designed by Scandinavian Avionics, the STC and slide-in rack contains all of the necessary Garmin equipment and paperwork for the ADS-B Out solution. Scandinavian Avionics has completed the initial installation on a prototype aircraft and expects to complete the upgrade on the entire SUN-AIR fleet in the coming months.

“Alongside Garmin, we have designed this STC so that Dornier 328 operators can take advantage of the installation efficiencies this upgrade affords,” said Michael Truelsen, CEO Scandinavian Avionics. “We look forward to continuing to work with Garmin to expand the aircraft eligibility list for this all-in-one, turn-key solution.”

The GTX 3000 and GPS 3000 Garmin ADS-B Out solution for the Dornier 328 has received EASA approval and is available immediately. For additional information regarding the STC, contact SUN-AIR or Scandinavian Avionics. Visit www.garmin.com/aviation for additional information.

Archives