Dassault Aviation has opened its new online shop: “The Store”.
This upgraded store, featuring an innovative design, allows aviation buffs in just a few clicks to purchase outstanding items reflecting the image and values of the Dassault Aviation brand. You will find a whole range of dedicated and exclusive products: the famous ‘Remove Before Flight’ keyrings, patches, apparel, airplane models …
This completely new line of articles has been specially designed and produced to Dassault Aviation specifications.
Alstom is delivering the very first 100% electric Aptis bus to Strasbourg transport operator Compagnie des Transports Strasbourgeois (CTS). This constitutes a major new step for Alstom, which aims to be the most innovative world actor for sustainable, smart mobility. Following the groundbreaking delivery, CTS will train 150 drivers in the operation of the new vehicles. During this initial training phase, the bus will run on the streets of Strasbourg with the livery that the Aptis fleet will adopt when in high-level service on the H line. With a length of 12 metres and equipped with 3 doors, Aptis buses were designed at the Hangenbieten Eurométropolis. They are the first electric buses to join CTS’s fleet of vehicles.
Thanks to its innovative design, Aptis offers an unparalleled passenger experience. Its berthing system for perfect alignment with the pavement, its low, completely flat floor and wide double doors allow easy movement and convenient boarding for people with reduced mobility and prams. Equipped with large bay windows along its entire length, Aptis offers 25% more glass surface area than a standard bus and a rear seating area with panoramic views of the city.
The vehicles requested by the city of Strasbourg are designed for slow charging at night at the depot. Aptis is also available for occasional recharging at the end of each line, using either ground-based charging solutions (SRS) or pantograph charging. Aptis was designed to have an optimised total cost. This is possible thanks to reduced maintenance and operating costs and a longer service life than that of standard buses. The aim for local authorities, therefore, is to have a total cost equivalent to that of existing standard diesel buses.
Aptis was also chosen by RATP and Île-de-France Mobilités, and by the areas of Greater Grenoble, Greater La Rochelle, and Greater Toulon, where commercial operations are due this year. As of September 2018, Aptis is also referenced by the CATP for public purchasing by local authorities. This referencing allows member authorities to order Aptis vehicles directly and simply from the CATP without having to embark on long and costly procedures.
Aptis also received the Origine France Garantie in January 2019. The certificate guarantees that at least 50% of Aptis’s value is French.
Design, production and testing will be carried out at Aptis Alstom’s site of Hangenbieten, in Alsace. Six other Alstom sites in France are involved in the design and manufacture of Aptis: Reichshoffen for the flanks, Saint-Ouen for the system integration, Tarbes for the traction, Ornans for the motors and Villeurbanne for the electronic components of the traction chain. Finally, Alstom’s site in Vitrolles is developing one of the charging solutions (SRS).
With this expanded private fleet and access to Delta’s global network, Wheels Up is strategically positioned to fulfill every travel need of its now 8,000+ members and customers.
The closing officially combines Delta Private Jets (DPJ) with Wheels Up, pairing Wheels Up’s membership programs, innovative digital platform and world-class lifestyle experiences with Delta Private Jets’ renowned reliability, safety, service and scale. The combination creates one of the world’s largest owned and managed fleets of nearly 200 private aircraft, ranging from the King Air 350i to large-cabin jets. With this expanded private fleet and access to Delta’s global network, Wheels Up is strategically positioned to fulfill every travel need of its now 8,000+ members and customers.
In the weeks ahead, Wheels Up and Delta will be communicating directly with customers to roll out cross-platform partnership benefits and other program features that cannot be found anywhere else within the private aviation industry.
“Together, Wheels Up and Delta will democratize the industry to make private flying and the private flying lifestyle accessible to significantly more individuals and businesses around the world,” said Wheels Up Founder and CEO Kenny Dichter. “By adding Delta Private Jets and partnering with Delta, our membership platform has evolved to one that can fulfill a vast range of flight needs on a very large scale.”
As part of this transaction Delta’s Chief Operating Officer, Gil West, has joined the Wheels Up Board of Directors.
“This innovative partnership is the latest step in Delta’s efforts to transform travel into a part of the journey to look forward to,” West said. “Bringing together the Delta brand, DPJ’s renowned reliability and scale, and the exceptional experiences that are the hallmark of Wheels Up, is opening up a whole new world of travel options to more travelers than ever before.”
The Wheels Up and Delta Private Jets teams will be working together to ensure a seamless transition for all DPJ employees and customers. DPJ employees will continue to operate out of their current location in Cincinnati.
“We are thrilled to welcome the talented and passionate Delta Private Jets employees into the Wheels Up family and for Gil West to join our Board of Directors.” said Dichter.
Over the next year, Wheels Up and Delta will continue introducing exciting cross-platform benefits and features, all designed to add more value for their members and customers.
Financial terms of the transaction will not be disclosed, and there is no expected impact to Delta’s 2020 financial guidance.
Alstom presents its improved Aptis e-bus at ElekBu
28 January 2020 – Alstom will present its Aptis electric bus at ElekBu 2020, being held in Berlin from 4 to 5 February. After extensive testing in many French and European cities for the past two years, the serial design of Alstom’s innovative 100% electric mobility solution incorporates feedback from passengers and transport operators. Following test drives in major German cities such as Berlin, Hamburg and Munich, the serial 12 meters Aptis e-bus is to be shown at a roadshow in Germany this year.
The serial vehicles are based on an optimized global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers, with a capacity of 100 persons, while still offering them more fluidity thanks to large sliding doors.
In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market. The high level of comfort is also reflected in the many very positive passenger surveys.
“Alstom is pleased to present the Aptis at ElekBu, which is so important for the German market. In the last two years, we have gained important experiences in trial operation. This 100% electric mobility solution offers a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Guillaume Legoupil, Sales Director Aptis.
Aptis is particularly popular in France, where it is also built. It has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. From February, the first series buses will be in regular service in Strasbourg.
Delta is ushering in a new best-in-class travel experience for pets and their owners with the exclusive launch of CarePod. The introduction of this state-of-the-art pet travel carrier, which provides many industry-leading features including real-time updates throughout the journey, heralds a new standard of first-class safety and care for pet air travel.
After five years of research, development and testing, on top of a successful two-month trial, CarePod will be exclusively offered at eight U.S. locations: Atlanta, Boston, Los Angeles, Minneapolis, New York (JFK and LaGuardia), San Francisco and West Palm Beach. There will then be a phased approach to roll out the CarePod pet travel carrier across Delta’s U.S. network.
“Continuous innovation is in Delta’s DNA and the launch of the CarePod pet travel carrier, an industry first, is an example of us seeking out innovative partnerships and looking at ways to improve the customer experience throughout all parts of their journey,” said Shawn Cole, Vice President — Delta Cargo. “As the only airline to offer this premium pet travel solution, it represents a significant improvement for the millions of people who want to travel with their four-legged family members.”
The CarePod pet travel carrier has several innovative safety features that make it the ultimate air travel experience for pets:
Stronger, industrial strength walls that are insulated to protect your pet against potential temperature fluctuations when moving between different climates and travel conditions.
Multi-layered windows and doors with specially angled blinds to help create a calming environment for pets by blocking out visual stress from unfamiliar environments.
The world’s first built-in hydration system for pet travel carriers, holding up to a liter of water that will auto replenish the spill-proof water bowl to ensure pets always have easy access to fresh water.
A powerful, enterprise level GPS tracking and monitoring system that connects your pet’s journey directly to the specialized Delta Cargo Control Center. The Center is managed 24/7/365 by trained experts who supervise and digitally monitor every CarePod pet journey from beginning to end, with the expertise and authority to send out the right staff on the ground to check on the pet if needed.
Seamless connectivity that enables you to use your mobile phone to view your pet’s key travel updates throughout their entire journey via deltacargo.com
CarePod pet travel carriers are made to the highest quality and standard, with human grade materials that are non-toxic, UV and antibacterial treated for longer lasting strength and protection.
The CarePod pet travel carrier is a next generation, IATA compliant pet travel carrier, which can accommodate dogs and cats permitted in a 300 series crate, or smaller, and can be booked between three and thirteen days prior to departure. The CarePod can be booked by visiting deltacargo.com or by calling Delta’s Cargo Customer Service Center at 1-800-352-2746.
“We’re thrilled that pet owners can now vacation and fly their pets with Delta’s best-in-class CarePod solution, having the peace of mind that their pets are protected in smart pet travel carriers, that are also digitally supervised by the Delta Cargo Control Center throughout the entire journey,” says Jenny Pan, founder and CEO of CarePod. “With the Delta partnership, we aim to raise the benchmark for pet air travel to allow families and pets to stay connected and travel safely together.”
Delta’s team of specialists and staff veterinarian constantly review processes and policies to identify areas of improvement to ensure the safety and health of pets. The airline has specially trained ground handlers who take care of pets at every step of their journey. Delta also has temperature-controlled holding areas and vehicles in numerous locations and overnight kenneling services. The Cargo Control Center in Atlanta also gives the airline 24/7/365 visibility into all shipments, including pets.
Delta Cargo started working with CarePod in 2018 and the relationship is the latest example of seeking out innovative partnerships to streamline and improve the customer experience. Delta is focused on tech-driven solutions to support the airline’s vision of the future, looking at the challenges throughout the customer journey and coming up with innovative solutions to transform travel to be less stressful and more enjoyable.
For further information on how to book the ultimate air travel experience for pets visit deltacargo.com.
JetBlue Founder David Neeleman Selects Salt Lake City as Headquarters for New Airline
America’s newest and perhaps most innovative airline does not yet have a name, or any airplanes. But it now has a headquarters.
David Neeleman’s startup will be based in Salt Lake City, where it plans to spend a capital investment of $3.2 million and create nearly 400 jobs over the next five years, according to local authorities. In return, the state offered tax rebates worth as much as about $1.1 million over five years.
“There’s a super strong technology base, and lower cost of living than California and some of the coastal areas,” Lukas Johnson, the airline’s chief commericial said in an interview. “We want to focus more on the technology aspect of the transportation side, and it makes a lot of sense. The tech sector is booming out here.”
RESTON, Va., Nov. 25, 2019 /PRNewswire/ — General Dynamics (NYSE: GD) announced today that the Gulfstream G500 has been delivered to its first European customer. An undisclosed Western-Europe-based charter operator took delivery of the aircraft at Gulfstream Aerospace headquarters in Savannah, Georgia.
The G500 earned certification from the European Union Aviation Safety Agency on Oct. 11 and is in service in North America, Brazil, the Middle East and Europe.
“We are excited about making G500 deliveries to Europe,” said Mark Burns, president, Gulfstream. “Since the introduction of the jet in 2014, customers around the world remain impressed and enthusiastic about the innovative cabin, next-generation technology, including the award-winning Symmetry Flight Deck, and high performance, speed and range capability of the aircraft. As the G500 fleet continues to grow in Europe, and around the world, its advanced technology raises the bar for business aviation.”
The G500 can travel 4,400 nautical miles/8,149 kilometers at Mach 0.90 and 5,200 nm/9,630 km at Mach 0.85. Its Symmetry Flight Deck features the first electronically linked active control sidesticks in civil aviation, the most extensive use of touchscreen technology in business aviation and a data concentration network, all of which streamline operations and reduce pilot workload.
Passengers also benefit from technology in the cabin. Along with award-winning, bespoke interior design, the G500 offers the Gulfstream cabin experience of 100 percent fresh air, 14 Gulfstream panoramic windows, a low cabin altitude and whisper-quiet sound levels.
OLATHE, Kan.–(BUSINESS WIRE)– Garmin International, Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced certification of the G1000® NXi integrated flight deck upgrade for the King Air C90. With the G1000 NXi, aircraft owners and operators receive a wealth of new features, innovative capabilities and added utility all within a modern flight deck. King Air C90 owners and operators can easily upgrade from the G1000 to the G1000 NXi with minimal aircraft downtime and installation labor to receive a next-generation integrated flight deck.“As the popularity and demand of the G1000 NXi continues to grow, we’re excited to expand the availability of this upgrade to even more aircraft”
“As the popularity and demand of the G1000 NXi continues to grow, we’re excited to expand the availability of this upgrade to even more aircraft,” said Carl Wolf, vice president of aviation sales and marketing. “The G1000 NXi is an advanced flight deck that adds modern features including wireless connectivity, visual approach guidance, SurfaceWatch™, HSI map and more, all of which add tremendous value and advanced capability than ever before into existing King Air C90 aircraft.”
Flight Stream 510 and Connext® technology within the G1000 NXi integrated flight deck enables Database Concierge, the wireless transfer of aviation databases from the Garmin Pilot™ app on a mobile device to the G1000 NXi. Additional features include two-way flight plan transfer, the sharing of traffic1, weather1, GPS information, back-up attitude information and more, between the G1000 NXi and the Garmin Pilot, FltPlan Go and ForeFlight Mobile applications.
Visual approach guidance and map overlay within the horizontal situation indicator (HSI) further enhance the G1000 NXi feature set. Within the HSI map, pilots can overlay NEXRAD, Flight Information Service-Broadcast (FIS-B) weather, weather radar, SafeTaxi® airport diagrams, traffic, terrain and more. NEXRAD weather radar imagery can be overlaid on the moving map and animated on the multifunction display (MFD). Split-screen view is also available on the MFD, offering a simultaneous view of maps, charts, checklists, flight plans and more on a single screen. The addition of sectional charts and IFR low/high enroute charts give pilots convenient access to chart data on the flight display.
The G1000 NXi also supports the display of Automatic Dependent Surveillance-Broadcast (ADS-B) In traffic and subscription-free Flight Information Service-Broadcast (FIS-B) weather. The addition of SurfaceWatch runway monitoring technology provides visual and aural cues to help prevent pilots from taking off or landing on a taxiway, on a runway that is too short or on the wrong runway based on performance data entered during preflight. Visual and audible runway distance remaining annunciations are also available via SurfaceWatch within the G1000 NXi.
Modernized displays offer improved readability, while state-of-the-art processors provide smoother panning throughout the displays and faster map rendering within the G1000 NXi. Because the flight displays initialize in seconds, pilots have immediate access to frequencies, flight plan data and more, saving valuable time in the cockpit. The G1000 NXi integrated flight deck also incorporates contemporary animations and new LED back-lighting, offering increased display brightness and clarity, reduced power consumption, and improved dimming performance.
This upgrade adds to the growing portfolio of aircraft eligible for the G1000 NXi integrated flight deck upgrade, including the King Air 200/300/350, Daher TBM 850/900, Cessna Citation Mustang, the Piper PA-46 and soon, the Embraer Phenom 100. Aircraft owners and operators can easily upgrade to the G1000 NXi with little aircraft down time and disruption of the panel because the displays preserve the same footprint and connectors, so panel and wiring modifications are minimized. The G1000 NXi upgrade for the King Air C90 is available immediately through select Garmin dealers. The upgraded components of the G1000 NXi also come with a two-year warranty, which is supported by Garmin’s award-winning avionics product support team. For additional information regarding the G1000 NXi upgrade for the King Air, contact Scott Frye at 913-440-2412 or scott.frye@garmin.com.
Garmin’s aviation business segment is a leading provider of solutions to OEM, aftermarket, military and government customers. Garmin’s portfolio includes navigation, communication, flight control, hazard avoidance, an expansive suite of ADS-B solutions and other products and services that are known for innovation, reliability, and value. For more information about Garmin’s full line of avionics, go to www.garmin.com/aviation.
– 28th annual Global Business Aviation Outlook projects 2020 deliveries to be higher than 2019 as new models enter service
– Five-year purchase plans for new business jets down slightly, but plans to buy used jets grow significantly
– Long-range forecast predicts healthy market with steady annual growth
LAS VEGAS, Oct. 20, 2019 /PRNewswire/ — The business jet industry is expected to see strong growth in the short to medium term, supported by several new airplane models coming to the market, according to Honeywell’s (HON) 28th annual Global Business Aviation Outlook. Released today, the Global Business Aviation Outlook forecasts up to 7,600 new business jet deliveries worth $248 billion from 2020 to 2029, down 1 to 2 percentage points from the 2018 10-year forecast.
“Production ramp up on many new business jet platforms are expected to lead to a 7% increase in deliveries in 2020, following a strong projected growth in 2019 over 2018 aircraft deliveries,” said Heath Patrick, president, Americas Aftermarket, Honeywell Aerospace. “We are confident that these new and innovative aircraft models will support solid growth in the short term and have a continuing impact on new business jet purchases in the midterm and long term.”
Key findings in the 2019 Honeywell global outlook include:
Operators plan to make new jet purchases equivalent to about 17% of their fleets over the next five years as replacements or additions to their current fleet, a decrease of 3 percentage points compared with 2018 survey results.
Of the total purchase plans for new business jets over the next 5 years, 35% are expected to occur in the first two years of the survey, with 57% of purchase plans realized by year three. This is 5 percentage points higher than last year’s survey.
Operators continue to focus on larger-cabin aircraft classes, from large cabin through ultralong-range aircraft, which are expected to account for more than 71% of all expenditures of new business jets in the next five years.
14 October 2019 – Alstom will present the first serial vehicle of its Aptis electric bus at Busworld 2019, being held in Brussels from 17 to 23 October. After the four prototypes that have been on the roads of many French and European cities for the past two years, this new design incorporates feedback from passengers and transport operators.
This first serial vehicle is based on an optimised global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers while still offering them more fluidity thanks to large sliding doors.
In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market.
“Alstom and its teams are very proud to be presenting the first series version of Aptis. This concentration of innovations perfectly represents what we always envisaged the production version of the 100% electric mobility solution would be. This clean, green bus, with its elegant design and optimised technical performance, will offer a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Benjamin Bailly, head of Alstom’s electric bus platform.
Aptis has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. Upcoming milestones include ongoing tests in Spain with the ground-based recharge solution SRS and the training of hundreds of drivers in a new driving experience ahead of the first traffic releases, scheduled for the end of the year in Strasbourg.
Manufacturing and testing of Aptis will be carried out at Alstom’s two sites in Alsace. The Hangenbieten site oversees manufacturing of the end modules (driver’s cab and rear lounge). Manufacturing of the central passenger module, final assembly and tests will be carried out at the Reichshoffen site. This scheme will allow serial production from the end of 2019 onwards. Five other Alstom sites in France contribute to the design and manufacture of Aptis: Saint-Ouen for system integration, Tarbes for traction, Ornans for engines, Villeurbanne for electronic components of the traction chain.
In order to complete Alstom’s vison of road electromobility, exhibited alongside Aptis at Busworld will also be SRS, a completely safe, ground-level, conductive, static recharge system allowing the charging of buses along their route or within depots. As a ground-based solution, it eliminates the need for overhead infrastructure in cities, preserving the aesthetics of the urban landscape. In depots, SRS avoids the infrastructure costs associated with overhead charging systems. SRS for e-buses is based on Alstom’s SRS static recharge technology for trams, a proven solution already in operation in Nice, France. It is developed at Alstom’s Vitrolles site.
