WICHITA, Kansas (BUSINESS WIRE) – Textron (NYSE: TXT) Aviation today announced that it has delivered the first flagship Cessna Citation Longitude super-midsize business jet registered in Mexico to a customer who plans to utilize the aircraft for business travel throughout Mexico and North America. The Longitude received certification from the Mexican Federal Civil Aviation Agency (AFAC) in 2022.
The Citation Longitude incorporates the latest technologies throughout the aircraft like integrated autopilot, autothrottles, and emergency descent mode (EDM). The aircraft is equally designed around the pilot experience, passenger comfort and overall performance, delivering an aircraft that lives up to its designation as the flagship of the Citation family of business jets. No other super-midsize business jet offers more range, greater payload or higher cruise speed at a lower direct operating cost. Longitude owners and operators in Mexico can appreciate city pairs such as Monterrey, Mexico to Asuncion, Paraguay; Toluca, Mexico to Belem, Brazil; and with only one stop, Cabo San Lucas, Mexico to Tokyo, Japan.
The company recently announced that the 100th production unit of the Citation Longitude rolled out of the factory and is expected to deliver later this year.
About the Cessna Citation Longitude
The clean-sheet design of the Longitude integrates the latest technology throughout the aircraft, bringing customers the lowest direct operating cost in its class. Powered by FADEC-equipped Honeywell HTF7700L turbofan engines, the Longitude combines on-condition engine overhaul periods to best-in-class airframe intervals of 18 months / 800 hours, whichever occurs first. Textron Aviation’s full time diagnostics recording system (AReS) and 3D Technical Publications combine advanced technology to reduce maintenance downtime and overall costs to operation.
OLATHE, Kansas – June 16, 2022 — Garmin® International, Inc., a unit of Garmin Ltd. (NYSE: GRMN), is pleased to announce European Union Aviation Safety Agency (EASA) approval of the GFC™ 600H for AS350 helicopters, providing a cost-effective flight control solution that reduces pilot workload and improves mission effectiveness. The GFC 600H provides a number of helicopter-tailored safety features, including attitude hold with speed stability, the innovative hover assist mode, Garmin Helicopter Electronic Stability and Protection (H-ESP™), dedicated return-to-level (LVL) mode, as well as overspeed and low-speed protection, and more.
The GFC 600H features a console-mounted mode controller with push-button controls and a night vision goggle (NVG) compatible display. Its robust architecture allows for both 2-axis and 3-axis configurations to provide the features and handling characteristics needed for a helicopter. Integrated smart servos provide pitch and roll inputs as commanded by the system. The collective sensor and the optionally available third servo provide yaw axis control capability to provide smooth flight control adjustments when the pilot moves the collective. Digitally controlled, high-performance servos allow for faster, crisper, more powerful response, which enables the GFC 600H to perform with smooth efficiency and advanced capability.
Thanks to the innovative hover assist mode, the system can also automatically detect a hover condition and allows for flight control inputs to help maintain position over the ground. In addition, when equipped with the optional yaw axis control, the GFC 600H can hold heading in hover. GFC 600H is well integrated with the G500H TXi flight displays and GTN or GTN Xi navigators, using navigation information to automatically fly approaches, enroute navigation, fully coupled missed approach procedures including holds, as well as search and rescue patterns1.
The advanced attitude and heading reference system (AHRS) technology combined with redundant, cross-checking sensors of the GFC 600H support smooth handling throughout the flight envelope. Further, attitude-hold mode reduces pilot workload by maintaining a specified altitude, while also providing inputs to help stabilize the helicopter when hand-flying. Designed with the pilot in mind, the GFC 600H incorporates cyclic-mounted trim controls to allow for seamless control of the system without taking a hand off of the flight controls during basic operations. Additional modes include altitude hold, altitude select, vertical speed, indicated airspeed and heading select.
The GFC 600H offers tremendous safety tools including overspeed protection and low-speed protection as well as Garmin H-ESP to help the pilot remain within a safe flight envelope when hand-flying the helicopter. H-ESP works in all modes – even when the system is not engaged – and can be manually disabled to allow for maneuvering flight. A dedicated LVL button is included on the GFC 600H and can be engaged by the pilot to return to straight-and-level flight, helping to avoid potential disorientation in degraded visual environments (DVE), such as inadvertent entry into instrument meteorological conditions (IIMC). Garmin has also implemented additional GFC 600H pilot training and supporting materials to allow for updated pilot licensing as required by the EASA certification.
OLATHE, Kansas/Business Wire – Garmin® International, Inc., a unit of Garmin Ltd. (NYSE: GRMN), has announced a long-term agreement with Heart Aerospace to provide the state-of-the-art Garmin G3000®integrated flight deck for the ES-19 electric airliner. Heart Aerospace is working to develop the new ES-19, a 19-seat electric airliner that has the potential to provide the regional air transport market with a more sustainable and environmentally friendly aircraft option as early as 2026. Additionally, United Airlines has conditionally agreed to purchase 100 ES-19 aircraft once the aircraft meets United’s safety, business and operating requirements.
The modular Garmin G3000 integrated flight deck boasts lightweight and vibrant high-resolution flight displays that support navigation, communication and flight sensor solutions and integrates seamlessly into the ES-19 aircraft systems. Specifically tailored to meet the needs of electric aircraft, the G3000 system that will be featured in Heart Aerospace’s ES-19 delivers enhanced capabilities to optimize the aircraft’s electric drive train and battery management systems. The G3000 is architected to provide the ability to efficiently facilitate future system upgrades as the electric aircraft industry continues to evolve.
Heart Aerospace is an electric airplane company headquartered in Gothenburg, Sweden, developing the ES-19, a nineteen-passenger regional aircraft driven entirely by batteries and electric motors. The first ES-19 is scheduled to enter into service by 2026. The first-generation aircraft will have a maximum range of up to 250 miles using lithium-ion batteries. The ES-19 will have zero operational emissions and offer significantly lower operating costs compared to similar sized gas-turbine aircraft. The ES-19 aircraft will also be quieter than its turboprop counterparts, with less vibration and noise, making it ideal for the development of short-range regional air travel.
CALGARY, Alberta & KANSAS CITY, Mo.–(BUSINESS WIRE)– Canadian Pacific Railway Limited (NYSE: CP) and Kansas City Southern (NYSE: KSU) have announced they have jointly filed a railroad control application with the Surface Transportation Board (“STB”) regarding the proposed transaction to create Canadian Pacific Kansas City (“CPKC”), the only single-line railroad linking the United States, Mexico and Canada.
The comprehensive control application provides an overview of the proposed operational integration of the CP and KCS rail networks, the impact of that consolidation on the companies’ finances and labour needs, and the anticipated competitive and other benefits that will flow from providing shippers with new and better transportation alternatives. Information in the filing outlines the public and customer benefits a CP-KCS combination would bring, including more efficient north-south trade arteries to support the interconnected supply chains of the United States, Mexico and Canada.
In addition to the central foundation of the transaction to invigorate transportation competition and support economic growth across North America, the CP-KCS combination will generate many other public benefits, including:
The creation of more than 1,000 direct new jobs system-wide, including approximately 760 in the United States, over the next three years brought about by expanded rail operations across the combined network.
Capital investments in new infrastructure of more than USD$275 million1 over the next three years to improve rail safety and capacity of the core north-south CPKC main line between Louisiana and the Upper Midwest.
Avoidance of more than 1.5 million tons of greenhouse gas (GHG) emissions within five years due to the improved efficiency of CPKC versus current operations.
Diverting 64,000 long-haul truck shipments to rail annually with new CPKC intermodal services, eliminating another 1.3 million tons of GHG emissions over the next two decades, saving $750 million in highway maintenance costs.
Rail customers will not experience a reduction in independent railroad choices as a result of the CP-KCS combination. The joint control application reiterates the applicants’ commitment to keep all existing freight rail gateways open on commercially reasonable terms, including the Laredo gateway between the United States and Mexico, and shows how customers will not lose competitive routings because no new regulatory “bottlenecks” are being created. It also describes how the combined company will compete aggressively to attract traffic to its network via new single-line lanes between Canada, the Upper Midwest and the Gulf Coast, Texas, and Mexico.
More than 960 stakeholders, including more than 440 shippers, 186 smaller railroads, dozens of public officials, eight major ports, railroad labor unions representing both CP and KCS employees and 289 rail industry suppliers have written letters to the STB supporting CP’s proposed combination with KCS.
CP has agreed to acquire KCS in a stock and cash transaction representing an enterprise value of approximately $31 billion, which includes the assumption of $3.8 billion of outstanding KCS debt. The transaction, which has the unanimous support of both boards of directors, values KCS at $300 per share, representing a 34 percent premium, based on the CP closing price on Aug. 9, 2021, the date prior to which CP submitted a revised offer to acquire KCS, and KCS’ unaffected closing price on March 19, 2021.2
The transaction is subject to approval by shareholders of each company along with satisfaction of customary closing conditions, including Mexican regulatory approvals. Shareholders are expected to vote on the transaction later this year.
CP’s ultimate acquisition of control of KCS’ U.S. railways is subject to the approval of the STB. In April 2021, the STB determined it would review the CP-KCS combination under the merger rules in existence prior to 2001 and the waiver granted to KCS in 2001 to exempt it from the 2001 merger rules. In August 2021, the STB reaffirmed that the pre-2001 rules would govern its review of the CP-KCS transaction. On Sept. 30, 2021, the STB confirmed that it has approved the use of a voting trust for the CP-KCS combination.
The STB review of CP’s proposed control of KCS is expected to be completed in the second half of 2022. Upon obtaining control approval, the two companies will be integrated fully over the ensuing three years, unlocking the benefits of the combination.
While remaining the smallest of six U.S. Class 1 railroads by revenue, the combined company would have a much larger and more competitive network, operating approximately 20,000 miles of rail, employing close to 20,000 people, and generating total revenues of approximately $8.7 billion based on 2020 actual revenues.
For more information about the benefits of the CP-KCS combination, visit futureforfreight.com
WICHITA, Kansas, August 26, 2021 – Textron Aviation today announced it successfully completed initial ground engine runs on the prototype Beechcraft Denali single-engine turboprop powered by GE Aviation’s new advanced Catalyst engine. The ground engine runs, which took place at Textron Aviation’s west campus in Wichita, Kansas, verified the functionality of the fuel system and engine, as well as the interface with the avionics and electrical systems. The testing moves the clean-sheet design aircraft closer to its milestone first flight, which is anticipated by the end of the year.
The Beechcraft Denali is designed and manufactured by Textron Aviation, a Textron Incorporated (NYSE: TXT) company.
Watch the new Beechcraft Denali video!
GE Aviation’ Catalyst engine has completed over 2,450 hours of testing and is prepping for a first flight on its Beechcraft King Air flying test bed. The Catalyst engine is a more environmentally friendly engine that burns less fuel than older turboprop technologies. The engine can also use sustainable aviation fuel, which results in lower emissions. The 1,300 shaft horsepower (SHP)-rated turboprop engine eases pilot workload with its single-lever power and propeller control. The Full Authority Digital Engine Controlled (FADEC) engine provides trend monitoring, which allows for on-condition maintenance with no mid-life Hot Section Inspection required.
The Beechcraft Denali development program has achieved several important milestones in recent months. Earlier this summer, GE Aviation Catalyst engine was installed on the Beechcraft Denali prototype airframe and the aircraft was powered on for the first time. Two other Denali flight test articles are also in development. Three additional ground test articles will be used for the airframe static and fatigue tests, and for cabin interior development and testing. The company anticipates certification for the Denali in 2023.
Technological advances The Denali cockpit features the Garmin (NASDAQ: GRMN) G3000 intuitive avionics suite featuring high-resolution screens and touchscreen controllers. An integrated Garmin autothrottle is now a standard feature, which interfaces with the Automatic Flight Control System (AFCS) and Flight Management System (FMS) to provide easy speed control throughout all regimes of flight from takeoff to touchdown.
Other standard G3000 features include a 10-inch weather radar, Terrain Awareness Warning System (TAWS-B), and dual transponders with automatic dependent surveillance-broadcast (ADS-B) capabilities, which are compliant with the latest air traffic control requirements.
the Garmin G3000 intuitive avionics suite
The aircraft is equipped with McCauley’s new 105-inch diameter composite, 5-blade, constant speed propeller, which is full feathering with reversible pitch and ice protection. The propeller will undergo a series of certification tests, and several are already underway.
Class-leading passenger experience The Beechcraft Denali’s flat floor cabin is designed to be the largest in its segment and offers the versatility to easily convert between passenger and cargo configurations. The Denali cabin features a standard seating configuration of six individual reclining seats and offers a nine-place high density seating option.
The aircraft boasts a digital pressurization system maintaining a 6,000-foot cabin altitude at a service ceiling of 30,000 feet. The Denali also offers passengers the convenience of adjusting the cabin temperature and airflow from a climate-control switch panel located on the cabin sidewall.
Denali customers will also enjoy large cabin windows, interior LED lighting, a forward refreshment cabinet and an in-flight accessible baggage compartment. An optional externally serviceable belted lavatory with pocket door enclosure that is located in the rear of the cabin is also available.
LAS VEGAS – March 8, 2021 – Low-fare carrier Frontier Airlines this week takes off with four new, nonstop routes to Las Vegas from El Paso, Texas; Little Rock, Arkansas; Oklahoma City, Oklahoma and Wichita, Kansas. Plus, later this month, Frontier begins nonstop service from McCarran International Airport (LAS) to two popular vacation destinations in Mexico: Los Cabos and Puerto Vallarta.
Frontier now offers 44 nonstop destinations from Las Vegas, including two international routes. The new flights to Mexico represent Frontier’s commitment to expanding travel opportunities to exciting destinations while maintaining its ‘Low Fares Done Right’ approach.
“We’re very excited bring more new flights to Las Vegas and offer an affordable travel option for folks from El Paso, Little Rock, Oklahoma City and Wichita to visit the Entertainment Capital of the World,” said Daniel Shurz, senior vice president of commercial, Frontier Airlines. “Frontier has quickly become a preferred airline in Las Vegas with an established crew base, robust flight schedule and ultra-competitive fares and we look forward to welcoming Nevadans on our two new international routes later this month to the sunny beaches of Los Cabos and Puerto Vallarta.”
OLATHE, Kan./Feb. 10, 2020/Business Wire – Garmin® International, Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced a long-term agreement to provide the state-of-the-art Garmin G3000® integrated flight deck to Joby Aviation for their revolutionary all-electric vertical takeoff and landing (eVTOL) aircraft, which is expected to commence commercial operations in 2024. Garmin has decades of experience deploying certified avionics solutions to new markets and this is continued with the touchscreen G3000 integrated flight deck for eVTOL aircraft in the Urban Air Mobility (UAM) market. The G3000 integrated flight deck has amassed extensive field service history, and with this derivation of the system into the eVTOL segment, it leverages that proven experience while offering advanced integration functionality in a compact design with unparalleled capabilities.
The modular Garmin G3000 integrated flight deck boasts light weight and vibrant high-resolution flight displays that support navigation, communication and flight sensor solutions and integrates seamlessly with Joby’s aircraft systems. Specifically tailored to meet the needs of eVTOL aircraft, the G3000 system that will be featured in Joby’s eVTOL aircraft delivers enhanced capabilities to optimize their air mobility service through tight integration with the vehicle mission computer and tailoring of flight guidance display indications. Further, the G3000 will be architected to provide the ability to efficiently facilitate future system upgrades as the Advanced Aerial Mobility (AAM) industry continues to evolve.
Joby Aviation is a California headquartered company developing an all-electric vertical takeoff and landing aircraft. After more than a decade of engineering and development, Joby intends to operate the aircraft as a fast, quiet and affordable air mobility service as early as 2024. The piloted, zero-emissions aircraft, will be capable of transporting four passengers up to 150 miles on a single charge, with a top cruising speed of 200 mph. It is designed to help reduce urban congestion and accelerate the shift to sustainable modes of transit. Designed for daily life, the aircraft lands vertically and provides flexibility and versatility to serve nearly any community.
OLATHE, Kan./Jan. 21, 2020/ – Garmin® International Inc., a unit of Garmin Ltd., today announced it has received Federal Aviation Administration (FAA) Supplemental Type Certificate (STC) approval for the GFC™ 600 digital autopilot in select Beechcraft King Air C90 aircraft and E90 aircraft1. The GFC 600 digital autopilot is optimized for turbine aircraft, delivering superior in-flight characteristics and new operational capabilities such as Vertical Navigation (VNAV), automatic Course Deviation Indicator (CDI) switching when paired with a GTN Series navigator, enhanced go-around capability and much more.
The GFC 600 certification for the Beechcraft King Air C90 and E90 provides owners and operators an autopilot upgrade that boasts superior integration potential with G600 and G600 TXi™ flight displays, the GI 275 electronic flight instrument, as well as the GTN™ and GTN Xi Series of navigators. The self-contained autopilot controller incorporates backlit keys and a bright, sunlight readable display that depicts autopilot status and mode selection. An intuitive built-in control wheel also provides convenient adjustment of aircraft pitch, airspeed and vertical speed modes. When the level button is selected, the aircraft automatically returns to straight-and-level flight.
Environmentally hardened autopilot servos designed for harsh operating conditions contain brushless DC motors offering improved performance and reducing maintenance requirements when compared to decades-old servo designs on the market today. In addition, these servos are optimized for turbine aircraft by offering more torque to help better command and respond to control demands required of turbine aircraft.
Standard mark-width (6.25-inch) design of the GFC 600 mode controller ensures the autopilot controller allows for routine installation into the aircraft’s avionics stack. Autopilot mode annunciation is available on the G600 TXi touchscreen glass flight display, as well as the G600 flight display. The addition of an optional autopilot annunciator panel also displays the selected autopilot mode in the pilot’s primary field of view and retains an identical footprint of third-party autopilot annunciators on the market.
KANSAS CITY, Mo.–(BUSINESS WIRE)– Kansas City Southern (NYSE: KSU) announced today that it has entered into a joint agreement with NorthPoint Development to develop the master planned Wylie Logistics Park in Wylie, Texas, located adjacent to KCS’ David L. Starling Wylie Intermodal Terminal.
The Wylie Logistics Park offers 2.4 million square feet of potential building capacity for traditional warehousing and distribution; industrial grade amenities; dual feed electrical system with redundant power; as well as a heavy-haul road network comprised of direct access to Highway 78 and the interstate system, air and seaports, and a state-of-the-art intermodal terminal.
“KCS is pleased to enter into this agreement with NorthPoint Development for the Wylie Logistics Park,” said KCS vice president chemical and energy products Ginger Adamiak, who also leads the company’s industrial development team. “Wylie is part of the Dallas metro area, the fourth fastest growing industrial market in the U.S., and Wylie offers a business-friendly environment, low taxes and a double free port exemption.”
“We are extremely bullish on the opportunities that the Wylie Logistics Park offers,” said NorthPoint Development president/founding partner Chad Meyer. “Wylie is a supportive, pro-business municipality partnering with a unique Class I intermodal facility that has the best direct connectivity to the growing east coast ports. Couple this with exceptional demographics from an eCommerce demand and the great labor pool that this development requires and you have all of the ingredients for a very successful project.”
KCS’ Wylie Intermodal Terminal opened in 2015 and expanded in 2018. It now offers track capacity of 19,000 feet and annual lift capacity of 342,000, resulting in fluid and efficient availability of containers and improved on-time arrivals and departures. The terminal also boasts 1,800-wheeled parking spaces (with room to expand); 300 container stack spots; an Automated Gate System (AGS) with high definition imagery; optical character recognition and biometric driver identification; enhanced traffic signals and specific turn lanes.
“The Wylie Logistics Park is ideal for customers looking to combine logistics and real estate in one location,” said KCS vice president intermodal and automotive Rodrigo Flores. “Locating in the park will provide tenants and customers significant cost savings by reducing drayage from ramp to facility and providing quick access to the regional interstate network. Customers will also enjoy the environmental benefits of intermodal transportation and connectivity to other intermodal and port facilities on KCS’ U.S. and Mexico rail network.”
The U.S. Air Force on Wednesday awarded Boeing [NYSE: BA] a $2.1 billion contract for 15 KC-46A tankers, expanding its fleet of aircraft that will not only set the standard for aerial refueling but will also help enable the integrated digital battlespace. Like a cellular tower in the sky, the KC-46 connects air forces to data needed to maintain the decision advantage and win on the 21st century battlefield.
“The KC-46’s adaptability is going to be a game-changer for the U.S. Air Force,” said Jamie Burgess, Boeing KC-46 tanker vice president and program manager. “We know our defense customers will need to transform how they fight and win in the modern era. That’s why Boeing is focused on making sure the KC-46 grows and changes with them.”
The KC-46 is a widebody, multirole tanker designed for state-of-the-art air refueling, cargo and medical transport. Boeing is now on contract for 94 KC-46A tankers.
“Our KC-46 fleet is growing, and we’re ready to extend the reach of next-generation air refueling to more of our Airmen,” said Col. Jason Lindsey, U.S. Air Force KC-46 System program manager.
Boeing delivered the first KC-46A to the U.S. Air Force in January 2019. Since then, the company has delivered 42 tankers to McConnell Air Force base in Kansas, Altus Air Force Base in Oklahoma, Pease Air National Guard base in New Jersey and Seymour Johnson Air Force base in North Carolina. The next-generation KC-46 is bringing new capabilities and operational flexibility to the U.S. Air Force and international customers.
Boeing is assembling KC-46A aircraft at its Everett, Washington, facility, where it also continues production of the KC-46 tanker for Japan.
