Utilizing proven advanced manufacturing techniques and continuing to drive down unit price, Sikorsky will build nine more CH-53K™ heavy lift helicopters under a new contract for the U.S. Navy. This production award also includes an agreement for the next production contract at an even lower unit price which will decrease further if additional quantity options are exercised, resulting in significant savings for the U.S. government and taxpayers.
The nine helicopters are part of a 200 aircraft Program of Record for the U.S. Marine Corps for a total of 33 production aircraft under contract with 3 of the 33 already delivered to the U.S. Marine Corps. Sikorsky will begin deliveries of the nine additional aircraft in 2024.
Sikorsky and the U.S. Navy also agreed to an even lower aircraft price for the next production contract of nine helicopters, to be exercised no later than February 2022.
Rolls-Royce has reached agreement with Fincantieri Marinette Marine to design and manufacture up to 40 fixed-pitch propellers for the U.S. Navy’s Constellation-class (FFG-62) guided missile frigate program. Fincantieri was awarded the shipbuilding contract from the U.S. Department of Defense (DoD) in April 2020, to design and build the first FFG-62 class frigate. The program of record is for a total of 20 ships, with the first to be delivered to the U.S. Navy in 2026.
The first set of propellers (two per ship) is scheduled to be delivered to Fincantieri in 2023. The propellers will be manufactured in Rolls-Royce’s recently upgraded Pascagoula, Mississippi foundry and will be some of the first work to utilize the newly installed state-of-the-art equipment and renovated facility; funded through investments from the DoD, Rolls-Royce, Jackson County (MS) and the state of Mississippi.
Each propeller for the FFG-62 class frigate weighs more than an average passenger bus. The Rolls-Royce Pascagoula Foundry is one of only two facilities in the country qualified to cast propellers of this size for the U.S. Navy. In fact, ninety-five percent of the commissioned U.S. Navy surface fleet is equipped with Rolls-Royce propellers.
Naval components manufactured by Rolls-Royce at Pascagoula include controllable-pitch propeller systems, fixed-pitch propellers, and water jets.
BAE Systems (OTC: BAESY) has received a $184 million contract option from the U.S. Marine Corps for more Amphibious Combat Vehicles (ACV) under full-rate production. The order demonstrates the Marine Corps’ confidence in a program that is on track to deliver this critical capability to the Marines. This contract award will cover production, fielding, and support costs for the ACV personnel carrier (ACV-P) variant. BAE Systems was awarded the first full-rate production contract option in December for the first 36 vehicles. This option on that contract increases the total number of vehicles under full-rate production to 72, for a total value of $366 million.
The ACV is a highly mobile, survivable, and adaptable platform for conducting rapid ship-to-shore operations and brings enhanced combat power to the battlefield. BAE Systems is under contract to deliver two variants to the Marine Corps under the ACV Family of Vehicles program: the ACV-P and the ACV command variant (ACV-C). A 30mm cannon (ACV-30) is currently under contract for design and development and a recovery variant (ACV-R) is also planned.
The Marine Corps selected BAE Systems along with teammate Iveco Defence Vehicles for the ACV program in 2018 to replace its legacy fleet of Assault Amphibious Vehicles (AAV), also built by BAE Systems. BAE Systems was also recently awarded an indefinite delivery indefinite quantity (IDIQ) contract worth up to $77 million for the ACV program that includes the provision of spare and replacement parts, testing equipment, and other services.
ACV production and support is taking place at BAE Systems locations in Stafford, Virginia; San Jose, California; Sterling Heights, Michigan; Aiken, South Carolina; and York, Pennsylvania.
STRATFORD, Conn. Feb. 10 – Continuing its 63-year legacy of providing safe and reliable transportation for the president of the United States, Sikorsky, a Lockheed Martin company (NYSE: LMT), is under contract to manufacture a total of 23 VH-92A® Presidential Helicopters for the U.S. Marine Corps. Sikorsky is on schedule to deliver the next generation presidential helicopter later this year.
The award announced February 5, 2021 by the U.S. Navy for five aircraft is the final lot of VH-92A presidential helicopters set to deliver in 2023. Sikorsky’s highly skilled workforce is completing final modifications on 12 of the production aircraft at its manufacturing facility in Stratford, Connecticut and Owego, New York.
The VH-92A will transport the president and vice president of the United States and other officials. Sikorsky brings unmatched experience and a proven track record to this mission having flown every U.S. commander-in-chief since President Dwight D. Eisenhower. The VH-92A, also called a “White Top” due to its notable white and green livery, will continue this legacy for decades to come.
The VH-92A program ensures long-term affordability and maintainability by utilizing the FAA certified Sikorsky S-92 aircraft which has industry leading reliability and availability. The S-92 aircraft is modified for the VH-92A mission based on government-defined requirements. The S-92 fleet surpassed 1.7 million flight hours in 2020 and averages 14,400 hours of safe flight per month.
EVERETT, Wash., Feb. 9, 2021 – The first Boeing [NYSE: BA] KC-46 tanker destined for the Japan Air Self-Defense Force (JASDF) took to the skies on its maiden flight yesterday. This successful flight highlights an important milestone as the aircraft now transitions into the certification phase of development.
“This is an exciting milestone for the JASDF and Boeing,” said Jamie Burgess, KC-46 program manager. “Japan is getting closer to receiving the most advanced air refueling tanker in the world.”
Japan is the KC-46 program’s first international customer and is scheduled to receive its first jet this year.
“Boeing’s KC-46 and its robust defensive systems will play an invaluable role in the security alliance between our two countries,” said Will Shaffer, president of Boeing Japan. “This tanker’s ability to carry cargo and passengers also makes it a critical tool to support humanitarian relief efforts across the Pacific region and beyond.”
The KC-46 refueling certification encompasses U.S. Air Force, U.S. Navy, U.S. Marine Corps and JASDF aircraft.
The U.S. Air Force awarded Boeing a $279 million contract for the JASDF’s first KC-46A tanker in December 2017. The agreement was completed through the Foreign Military Sale process between the U.S. government and Japan. Japan is now on contract for a total of four KC-46 tankers.
Boeing is assembling KC-46A aircraft for both the U.S. Air Force and Japan on its 767 production line in Everett, Washington. Boeing’s Japanese partners produce 16% of the KC-46 airframe structure.
Rolls-Royce has signed an agreement to sell the Bergen Engines medium speed gas and diesel engines business to TMH International, the international branch of TMH Group, for net proceeds of approximately EUR 150m.
TMH Group, based in Russia, is a leading engineering company in rail transport technologies and the world’s fourth largest supplier of rail rolling stock. It offers a full range of products and services including medium-speed engines for rail applications with current production of more than 850 engines a year. Established in 2002, TMH is privately-owned and employs 100,000 people across 25 sites worldwide. The acquisition of Bergen Engines, based in Bergen, Norway, is part of TMH’s strategy to diversify its business activities, expand its product portfolio and international footprint.
Bergen Engines will be operated as a stand-alone business by TMH International, which is headquartered in Switzerland. TMH International already operates in Argentina, Cuba, Egypt, Germany, Hungary, Israel and South Africa.
The agreement follows a strategic review by Rolls-Royce of Bergen Engines announced in February 2020. The sale includes the medium speed engine factory, service workshop and foundry in Norway; engine and power plant design capability; and a global service network spanning more than seven countries. Since 1946, Bergen Engines has supplied over 7,000 engines to marine and power generation customers worldwide, of which around 4,000 are still in operation. Bergen Engines’ long-term relationship with Kongsberg Maritime, distributor of Bergen medium speed engines to the maritime market, is planned to continue as is.
Rolls-Royce has signed an agreement to sell the Bergen Engines medium speed gas and diesel engines business to TMH International, the international branch of TMH Group, for net proceeds of approximately EUR 150m.
Bergen Engines plant in Hordvikneset near Bergen, Norway
TMH Group, based in Russia, is a leading engineering company in rail transport technologies and the world’s fourth largest supplier of rail rolling stock. It offers a full range of products and services including medium-speed engines for rail applications with current production of more than 850 engines a year. Established in 2002, TMH is privately-owned and employs 100,000 people across 25 sites worldwide. The acquisition of Bergen Engines, based in Bergen, Norway, is part of TMH’s strategy to diversify its business activities, expand its product portfolio and international footprint.
Bergen Engines will be operated as a stand-alone business by TMH International, which is headquartered in Switzerland. TMH International already operates in Argentina, Cuba, Egypt, Germany, Hungary, Israel and South Africa.
The agreement follows a strategic review by Rolls-Royce of Bergen Engines announced in February 2020. The sale includes the medium speed engine factory, service workshop and foundry in Norway; engine and power plant design capability; and a global service network spanning more than seven countries. Since 1946, Bergen Engines has supplied over 7,000 engines to marine and power generation customers worldwide, of which around 4,000 are still in operation. Bergen Engines’ long-term relationship with Kongsberg Maritime, distributor of Bergen medium speed engines to the maritime market, is planned to continue as is.
Bergen Engines has been a part of Rolls-Royce since 1999 and has approximately 950 employees, with the majority based in Bergen, Norway. In 2019 the business generated revenues of £239m which were consolidated within the results of our Power Systems business.
The transaction has been approved by the boards of both Rolls-Royce and TMH and is expected to close in the second half of 2021.
On February 1, 2021, Lufthansa will be departing on the longest passenger flight in the history of its company, marking one of the most unique flights the airline has ever carried out. On behalf of the Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research (AWI) in Bremerhaven, the Lufthansa Group’s most sustainable aircraft, an Airbus A350-900, will be flying 13,700 kilometers nonstop from Hamburg to Mount Pleasant in the Falkland Islands. The flight time is calculated at around 15:00 hours. There are 92 passengers booked for this charter flight LH2574, half of which are scientists and the other half, being the ship crew for the upcoming expedition with the Polarstern research vessel.
“We are pleased to be able to support a polar research expedition during these difficult times. Commitment to climate research is very important to us. We have been active in this field for more than 25 years and have equipped selected aircraft with measuring instruments. Since then, scientists all around the world have been using the data collected during the voyage to make climate models more precise and improve weather forecasts,” says Thomas Jahn, fleet captain and project manager Falkland. Since the hygiene requirements for this flight are extremely high, Captain Rolf Uzat and his 17-member crew entered a 14-day quarantine last Saturday, the same time that the passengers did. “Despite the crew restrictions for this particular flight, 600 flight attendants applied for this trip,” says Rolf Uzat.
The preparations for this special flight are immense. They include additional training for the pilots via special electronic maps for flight and landing as well as managing the kerosene available at the Mount Pleasant military base for the return flight. The Airbus A350-900 is currently stationed in Munich, where it is being prepared for the flight. In Hamburg, the aircraft is loaded with additional cargo and baggage, which has been extensively disinfected and will remain sealed until departure. Besides the catering, there are additional containers for the residual waste on board, since this can only be disposed after the aircraft arrives back in Germany. The Lufthansa crew includes technicians and ground staff for on-site handling and maintenance who will quarantine after landing in the Falkland Islands due to government requirements. The return flight LH2575, is scheduled to depart for Munich on 03 February and will be carrying the Polarstern crew, which had set out from Bremerhaven on December 20 to resupply the Neumayer Station III in Antarctica, and must now be relieved.
In order to make research as climate-friendly as possible, the Alfred Wegener Institute will offset CO2 emissions from business flights via the non-profit climate protection organization atmosfair – which is also the case for this particular flight. The institute donates funds for biogas plants in Nepal for every mile flown, thereby reducing the same amount of CO2 emissions. This helps maintain the overall CO2 balance regardless of where in the world the CO2 emissions can be reduced. In addition to pure CO2 emissions, other pollutants such as nitrogen oxides and soot particles are also taken into account.
Preparations for the special flight began together with the Alfred Wegener Institute in the summer of 2020. The usual route via Cape Town was not feasible due to the infection situation in South Africa, leaving only the route via the Falkland Islands. After landing on the Falkland Islands, scientific staff and crew members will continue their journey to Antarctica on the research vessel Polarstern.
Super Hornet to become the fourth Boeing platform for the flight demonstration team.
Boeing has modified Blue Angels since 2008 and delivered 23 aircraft to date.
Boeing [NYSE: BA] has delivered the first Super Hornet test aircraft for the U.S. Navy’s Blue Angel flight demonstration squadron. The unpainted aircraft now enters the flight test and evaluation phase at Naval Air Station Patuxent River in Maryland. Boeing expects to deliver a total of 11 aircraft for the squadron in 2020.
“The Super Hornet is an iconic representation of excellence in naval aviation,” said ret. Admiral Pat Walsh, vice president of U.S. Navy & Marine Corps Services for Boeing. Walsh flew with the Blue Angels from 1985 to 1987 as the Left Wingman (#3) and Slot Pilot (#4). “As Boeing continues to support the operational fleet of Navy Super Hornets, we are excited to see this platform enter a critical phase of its journey to joining the team.”
The flight demonstration squadron has flown Boeing or Boeing-heritage aircraft for more than 50 years, starting with the F-4J Phantom II in 1969, and then moving to the A-4F Skyhawk. The team currently operates the F/A-18A-D Hornet.
Boeing converts F/A-18 Hornets and Super Hornets into Blue Angels at the company’s Cecil Field facility in Jacksonville, Florida. Major modifications include the addition of an oil tank for the smoke-generation system, fuel systems that enable the aircraft to fly inverted for extended periods of time, civilian-compatible navigation equipment, cameras and adjustments for the aircraft’s center of gravity.
Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As a top U.S. exporter, the company supports commercial and government customers in more than 150 countries. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.
Rolls-Royce is to supply complete MTU propulsion systems for five new Type 31 general-purpose frigates for the Royal Navy. In total, the order comprises of 40 engines and generator sets to be used for main propulsion and on-board power generation, the MTU Callosum propulsion control and monitoring system, and Integrated Logistics Support (ILS).
Rolls-Royce liefert komplette MTU-Antriebssysteme für fünf neue Type-31-Mehrzweckfregatten der britischen Royal Navy. Der Auftrag umfasst insgesamt 40 MTU-Hauptantriebsmotoren und Bordstromaggregate, das Antriebssteuerungs- und Überwachungssystem MTU Callosum und die dazugehörige integrierte logistische Unterstützung (ILS).
Delivery scope: 20 main propulsion engines and 20 on-board generator sets, Callosum marine automation and integrated logistic support
MTU propulsion solutions from Rolls-Royce now feature in almost all current and future Royal Navy vessels
Each new Type 31 frigate of the Royal Navy will be powered by four MTU 20V 8000 M71 engines, each delivering over 8,000 kW.
Die neuen Type-31-Fregatten der britischen Royal Navy werden von je vier MTU-Motoren des Typs 20V 8000 M71 mit einer Leistung von über 8000 Kilowatt angetrieben.
Rolls-Royce is to supply complete MTU propulsion systems for five new Type 31 general-purpose frigates for the Royal Navy. In total, the order comprises of 40 engines and generator sets to be used for main propulsion and on-board power generation, the MTU Callosum propulsion control and monitoring system, and Integrated Logistics Support (ILS). Each new frigate will be powered by four MTU 20V 8000 M71 engines, each delivering over 8,000 kW. On-board power will be provided on each vessel by four MTU generator sets based on 16V 2000 M41B units, each delivering in excess of 900 kW. In September 2021, Rolls-Royce will deliver the first shipset comprising four main propulsion engines and four generator sets to prime contractor Babcock International Group. Integrated Logistics Support for propulsion and onboard power systems will ensure efficient and cost-effective maintenance throughout their entire service life. It is expected that the MTU Callosum propulsion control and monitoring system will be officially added to the supply contract very shortly.
Sean Donaldson, Managing Director for Energy & Marine at Babcock International, said: “We’re delighted to welcome Rolls-Royce with its MTU solutions as a supplier to our Type 31 Programme. Its engines and on-board generator sets are already proving their mettle in numerous comparable vessels worldwide.”
Knut Müller, Vice President Marine & Defense at Rolls-Royce business unit Power Systems, said: “We’re very proud of the fact that Babcock International Group has opted for MTU propulsion and on-board power solutions on this highly significant project. MTU products now feature in almost all current and future projects of the Royal Navy. That is impressive proof of the trust our British partners place in us and of the reliability and flexibility of our products.”
The Royal Navy relies on Rolls-Royce propulsion solutions across its surface and submarine fleets. MTU Series 2000, 4000 and 8000 units will feature in future in most Royal Navy warships – in destroyers (Type 45), all frigate classes (Type 23, 26, 31) and submarines (Astute class).
Rolls-Royce is to supply complete MTU propulsion systems for five new Type 31 general-purpose frigates for the Royal Navy. In total, the order comprises of 40 engines and generator sets to be used for main propulsion and on-board power generation, the MTU Callosum propulsion control and monitoring system, and Integrated Logistics Support (ILS).
Rolls-Royce liefert komplette MTU-Antriebssysteme für fünf neue Type-31-Mehrzweckfregatten der britischen Royal Navy. Der Auftrag umfasst insgesamt 40 MTU-Hauptantriebsmotoren und Bordstromaggregate, das Antriebssteuerungs- und Überwachungssystem MTU Callosum und die dazugehörige integrierte logistische Unterstützung (ILS).
KiwiRail is taking the next step to procure a new generation of Cook Strait ferries which will increase the capacity on this vital transport link, and increase its resilience.
A Request for Proposal (RFP) to find a preferred shipyard to build two new ships for the Interislander is being issued today, the next step in the procurement process.
“The new ships will strengthen and enhance the vital transport link between the North and South Islands and represent a once-in-a-generation opportunity to transform the Cook Strait crossing,” Group Chief Executive Greg Miller says. The ferries are extensions of State Highway 1 and the Main Trunk Line across Cook Strait, linking road and rail networks between the two islands.
Currently, Interislander operates a fleet of three ferries, moving some 800,000 passengers and up to $14 billion worth of road and rail freight between the North and South Islands each year.
The $400 million contribution in Budget 2020 has enabled KiwiRail to go out to international tender to build the new ships, which are intended to arrive for service in 2024 and 2025. When the ferries are delivered, it will be over 25 years since New Zealand last introduced a brand-new purpose-built ferry to its fleet.
The $400 million towards the ferries and KiwiRail’s infrastructure at the ports in Wellington and Picton builds upon a $35 million-dollar investment in last year’s Budget for ferry design and procurement work.
The two new ferries will be technologically advanced, have significantly lower emissions, a greater carrying capacity – including rail wagons – and provide an enhanced visitor experience, Mr Miller says.
“On behalf of New Zealanders, we are grateful to the Government for enabling this acquisition,” says Mr Miller. “It is exciting to issue this RFP, to move the project forward and to find a shipyard to partner with KiwiRail to deliver the ships to our specifications, quality and timeline requirements.”
“Only overseas shipyards have the ability to build ferries of the size and standard needed for the Cook Strait. However, the project also involves new infrastructure including terminals, linkspans, and marshalling yards which will create numerous Kiwi jobs in Picton and Wellington. Community engagement has already begun in Picton for the proposed new terminal there.
“We are engaging our Interislander staff in the design of the ferries to ensure the ships are not only great for passengers, but also for those who work on them.
“Our new ferries and the associated port infrastructure will provide greater resilience for this crucial link that unites our country and will serve New Zealand for the next generation and beyond.”
