Tag: transit (Page 2 of 3)

Amtrak Receives $63 Million from FRA for Northeast Corridor Infrastructure Improvements

May 29, 2020 / WIL BALDWIN

State of Good Repair grant financing will help fund projects in New Jersey and Maryland

The Federal Railroad Administration (FRA) has awarded two Northeast Corridor (NEC) grants to Amtrak as part of its $302.6 million in the State of Good Repair grants to help repair and rehabilitate railroad infrastructure and other assets across the country for 12 projects in nine states. Totaling more than $63 million, the two grants will help fund the Portal North Bridge Project and the Winans to Bridge Improvement project.

“Improving infrastructure in this country is vital to strengthening the economy and providing a safer, more reliable travel experience as we look towards recovery,” said Amtrak President and CEO Bill Flynn. “We thank the FRA, and our state and NEC partners for their invaluable support in awarding us these grants.”

A total of $55.1 million of the State of Good Repair grant issued by the Federal Railroad Administration was awarded towards the Portal North Bridge Project to replace the century old two-track swing bridge in Kearny, New Jersey with a fixed span. Serving as a critical link for intercity and commuter customers traveling to or from New York City, the current bridge was used by 450 daily trains with passengers making more than 200,000 daily trips on Amtrak’s intercity and New Jersey Transit’s commuter rail services in 2019.

The new bridge is designed as a 2.44-mile modern fixed structure that will eliminate the failures associated with aging infrastructure that causes delays across the NEC. A higher clearance (more than 50 feet above the Hackensack River), will eliminate the need for the bridge to open, allowing for faster operating speeds (from 60 to 90 mph), improved performance and greater reliability for an upgraded customer experience. Early construction of the new bridge began in Fall 2017 and was completed on time and on budget. NJ TRANSIT is seeking a Core Capacity grant from the Federal Transit Administration that would allow major construction to begin as soon as next year.

The Portal North Bridge Project is a key component of the Gateway Program and is identified as a regional priority in the NEC Commission’s five‐year capital plan.

Additionally, as part of a separate project, Amtrak, in partnership with Maryland Department of Transportation, Maryland Transit Administration (MDOT MTA), is also slated to receive $8 million to rehabilitate and upgrade a five‐mile section of track that is part of the Amtrak‐owned NEC mainline near Baltimore.

The project will restore Track A to 90 mph speeds, up from 60 mph, to shorten trip times, improve ride quality, and provide operational flexibility. The work will include upgrades from Winans to Bridge interlockings, replacing timber ties with concrete, installing heavier rail and laying new ballast. Bridge interlocking is located at the north end of West Baltimore Station and Winans is at the south end of Halethorpe Station. These upgrades will enable high‐speed operations on all four tracks on this segment.

The project will also enable service to be maintained while tracks are taken out of service to allow support for construction elements of the B&P Tunnel Replacement project. This work is included in the Northeast Corridor Commission’s five‐year capital plan as a regional priority. To learn more about these and other critical infrastructure projects Amtrak is working on, visit nec.amtrak.com/readytobuild/.

Other grant awards include Amtrak shared joint applications with Connecticut DOT for the WALK Bridge Replacement in Norwalk, Connecticut and Substation 41 Reconstruction in Kearny, NJ as led by NJ TRANSIT as well as other NEC related projects in New York and Pennsylvania. In addition, grants were awarded to various projects in California, Illinois, Michigan and North Carolina that provide benefits to Amtrak and its Long Distance and/or State-Supported customers.

Ford Bets More Businesses Want Carbon-Free Delivery Vans

March 4, 2020 / WIL BALDWIN

DETROIT (Reuters) – Ford Motor Co is putting more chips on a bet that it can profit from selling electric vans to delivery businesses that need to reduce carbon emissions.

Ford will roll out an all-electric version of its Transit van for North America in model year 2022, mirroring the timetable for launching a similar model for the European market, the company said on Tuesday in conjunction with the NTEA Work Truck Show in Indianapolis.

“Our electric bet as a company is different than our competitors,” Ford Chief Operating Officer Jim Farley said in an interview. “The most critical bet we will be making over the next several years will be our commercial vehicles.”

Two of three electric vehicles Ford has announced as part of an $11.5 billion investment in electrification through 2022 are aimed at commercial customers – the Transit and an electric version of the company’s best-selling model, the F-150 pickup.

Ford’s Mustang Mach-E electric SUV represents a low-volume challenge to electric luxury vehicle market leader Tesla Inc.

The electric Transit and F-150 will play in market segments Ford dominates in the United States and Europe.

“Half of the vehicles doing work in the U.S. are Ford Motor Co vehicles,” Farley said. Ford is also the No. 1 commercial vehicle brand in Europe, and has led the commercial van market in Britain, which is Europe’s largest, for 55 years.

Regulators in Europe and in some U.S. cities are stepping up pressure on businesses to replace diesel or gasoline-fueled delivery vans with electric models to reduce pollution in city centers.

In the United States, Amazon.com Inc, has ordered 100,000 electric delivery vans from start-up Rivian, the first of which will be delivered in 2021 and built in Normal, Illinois. Ford has a separate partnership with Rivian.

The electric Transit will not be related to the Rivian van, said Ted Cannis, Ford’s director of electrification.

The new Transit will be an early test of the company’s efforts to deploy new connectivity technology and services to go with it, Farley said.

Ford said the electric Transit will be built in America and cost more than the gasoline-powered version, which starts at $34,500. Research firm Auto Forecast Solutions said it will be built in Kansas City, Missouri, along with the gasoline version.

Supplier sources who asked not to be identified said Ford will launch production in late 2021, with plans to build around 2,000 that year and increase to 14,000 annually by 2023.

(Reporting by Ben Klayman in Detroit; Additional reporting by Paul Lienert; Editing by Richard Chang)

Trump Proposes Cutting Amtrak Funding, Boost Infrastructure

February 10, 2020 / WIL BALDWIN

WASHINGTON, Feb 10 (Reuters) – The White House budget released on Monday proposed cutting funding for passenger rail carrier Amtrak, while calling for a significant boost in infrastructure spending.

The proposal would cut Amtrak funds by more than 50% over 2020 levels. It could cut funds to the congested northeast corridor from $700 million to $325 million and cut long-distance train funds from $1.3 billion to $611 million and then phase out support for long-distance trains.

Trump has proposed similar cuts in prior budgets and been rejected, and Democrats are not likely to go along. Trump has sparred with Democratic lawmakers over a $13 billion infrastructure project to build and repair tunnels and bridges in the New York City area known as “Gateway.”

In November, Amtrak said for the year ended Sept. 30, it had set records for ridership, revenue, and financial performance, including 32.5 million customer trips, a year-over-year increase of 800,000 passengers.

Amtrak reported a loss of $29.8 million in the year through September 2019 compared with a loss of $170.6 million in the prior fiscal year.

The Trump budget calls for $810 billion in highway, transit, safety and other surface transportation funds and then an additional $190 billion for a wide range of programs including $25 billion for rural water, broadband and other projects. It does not specify how to pay for the repairs or for funding an estimated $107 billion shortfall in the highway trust fund through 2026.

The budget again also calls for eliminating an Energy Department clean vehicle loan program that boosted Tesla Inc , Nissan Motor Co and Ford Motor Co during the last industry downturn, but has not funded a new project in almost a decade.

Start-up Lordstown Motors Chief Executive Steve Burns told Reuters last month the company wanted to apply for a $200 million loan from the Energy Department program to retool a former General Motors factory in Lordstown, Ohio. Burns met with Energy Secretary Dan Brouillette for an hour to discuss the proposal last month. Lordstown is partially owned by start-up Workhorse Group Inc.

The budget also again proposes killing the $7,500 electric vehicle tax credit that phases out for automakers after 200,000 EVs are sold. The White House blocked an effort in December by congressional Democrats to expand the credit to additional vehicles.

(Reporting by David Shepardson; Editing by Steve Orlofsky)

Acela at B&P Tunnel Acela, Amtrak, B&P Tunnel, Baltimore, NEC, maryland An Acela train emerges from the B&P Tunnel in Baltimore.

Bombardier Joint Venture Wins Contract to Build 160 New Chinese Standard High-Speed Train Cars

January 4, 2020 / WIL BALDWIN

With around 4,500 train cars already delivered, Bombardier’s Chinese joint venture is the only Sino-foreign entity to win a new Chinese standard high-speed train bid
New Chinese standard high-speed train cars to enhance passenger experience and contribute to the expansion of the world’s longest high-speed rail network

Global mobility solution provider Bombardier Transportation announced today that its Chinese joint venture, Bombardier Sifang (Qingdao) Transportation Ltd. (BST), has been awarded a contract from China State Railway Group Co., Ltd. (CHINA RAILWAY) to supply 160 CR400AF cars, a new Chinese standard high-speed train car for China’s evolving high-speed rail network. The 160 cars will be configured into ten 16-car trainsets with an operating speed of 350 km/h. The total contract is valued at approximately 2.97 billion CNY ($427 million US, 380 million euro). Bombardier Transportation owns 50 per cent of the shares in BST, which is consolidated by Bombardier Transportation’s partner CRRC Sifang Rolling Stock Co., Ltd.

Jianwei Zhang, President, Bombardier Transportation China, said, “We are very proud to have been chosen to supply the new generation of CR400AF cars, a high-speed railway car, through our BST joint venture. China’s high-speed rail industry has become one of the nation’s economic pillar industries and the high-speed network has brought greater mobility and prosperity to the public. Bombardier is proud of its contributions to China’s rail industry and looks forward to delivering more of the high-quality products that are helping China meet its ambitious long-term mobility goals.”

In 2018, BST won two contracts to build a total of 288 CR400AF cars and every car was delivered on-time and on quality. This latest contract is BST’s third and reflects the trust that CHINA RAILWAY has in BST’s efficiency, reliability and competitive edge. All 160 cars will be delivered by mid-2020.

Bombardier Transportation in China is the full solution provider across the entire value chain. From vehicles and propulsion to services and design, Bombardier Transportation in China has seven joint ventures, six wholly foreign-owned enterprises, and more than 8,000 employees. Together, the joint ventures have delivered 4,500 railway passenger cars, 580 electric locomotives and over 2,500 metro cars, Monorail, APM, and trams to China’s growing rail transit markets. It is a major signalling supplier to the Chinese high-speed network and through its joint ventures, propulsion equipment and signalling systems are utilized in a total of 30 Chinese cities.

Bombardier Renews Operations and Maintenance Contract for John F. Kennedy International Airport

January 3, 2020 / WIL BALDWIN

Renewed agreement continues long-term partnership with one of the ten busiest airports in the United States
Latest contract highlights Bombardier’s comprehensive mobility solutions for transit systems worldwide

Mobility solution provider Bombardier Transportation announced today that it renewed a contract with the Port Authority of New York and New Jersey to provide operations and maintenance services for the Authority’s automated transit system (AirTrain JFK) at John F. Kennedy International Airport in New York. The contract is valued at approximately $309 million US (277 million euro) and covers a period of five years.

“We greatly appreciate the confidence the Port Authority has placed in us and look forward to continuing our 16-year partnership in providing safe, reliable, customer-friendly, 24/7, 365-day service to AirTrain JFK’s growing ridership,” said Elliot G. (Lee) Sander, President, Americas Region, Bombardier Transportation. “We’re proud to offer a convenient and efficient mobility solution for JFK’s passengers and employees, not only within the airport, but between the airport and the city’s transit systems,” he continued.

Bombardier’s scope of work under the contract includes: 24-hour train operations and passenger assistance; maintenance of the vehicle fleet; maintenance of the tracks and power supply and signalling systems; and maintenance of all facilities on the system such as stations and platforms.

Bombardier was a member of the consortium responsible for designing and supplying the AirTrain JFK system, including the fleet of 32 metro vehicles, today branded as BOMBARDIER MOVIA, and has been operating and maintaining the system since its opening in December 2003. The system currently serves a total ridership of over 20 million passengers annually.

Bombardier has been designing, building, operating and maintaining automated transit systems for airports and cities around the world for nearly 50 years. In the United States, the ten busiest airports have chosen Bombardier for their transportation systems.

MOVIA metro vehicles on AirTrain at JFK International Airport

Singapore’s First Driverless Urban Transit System Turns 20

December 8, 2019 / WIL BALDWIN

In 1996, Bombardier Transportation pioneered a new mobility solution for Singapore’s first light rail transit system – the driverless BOMBARDIER INNOVIA APM 100 automated people mover. This fully automated transit system went into service in 1999 on the revolutionary Bukit Panjang LRT line to improve the quality of life for residents by connecting outlying residential areas with the high-capacity Mass Rapid Transit (MRT) rail network as well to schools, retail, community and healthcare centers.

2019 marks the 20^th anniversary of the first APM’s entry into service, a historic milestone for Bombardier. The INNOVIA APM system embodies the evolution of automated transit operations over many years at numerous locations around the globe, from London and Guangzhou to Phoenix and San Francisco – the INNOVIA APM is in use in many of the world’s busiest international airports and city districts. Currently, Bombardier has 32 APM vehicles circulating Bukit Panjang with an annual ridership of 24 million passengers, bringing residents closer to their homes.

Singapore’s Bukit Panjang LRT line

Singapore’s Bukit Panjang LRT line, runs on a fully-automated people mover system based on the INNOVIA APM 100 automated people mover system. Already in service in many of the world’s busiest cities and biggest airports, this proven passenger mobility solution provides safe, swift and seamless connectivity between the outlying residential areas and the city.

https://www.youtube.com/watch?v=slMxgFzVzjs&feature=emb_title

The suburban town

The iconic Bukit Panjang LRT line is an 8-km automated guideway transit solution intended to serve the residential town located in the West Region of Singapore, acting as a replacement to the many buses deployed through the town, especially during rush hour. With an estimated population of 140,000, half of Bukit Panjang’s residents rely on the LRT for their daily commute. A complete loop journey takes 28 minutes, serving 13 stations, providing a feeder service to connect residents to the two high-capacity North-South (red) and Downtown (blue) MRT lines, moving them to the city.

Operating on a dedicated elevated guideway at a speed between 20km/h to 65 km/h, this arrangement ensures consistent service that provides shorter waiting times for the passengers without interfering with surrounding road traffic. The current BOMBARDIER CITYFLO 550 rail control and signalling system and wireless communications supports the system’s operation while ensuring seamless integration into the city’s existing infrastructure.

Upgrading Bukit Panjang

In 2018, Bombardier signed an asset replacement contract to upgrade the Bukit Panjang LRT system by supplying a fleet of 19 BOMBARDIER INNOVIA APM 300 vehicles, retrofitting 13 existing INNOVIA APM 100 vehicles, as well as upgrading its current CITYFLO 550 technology to the advanced CITYFLO 650 CBTC solution for a smoother ride for commuters. Other works include power rail enhancement and condition monitoring through Train Control Management System.

Working hand-in-hand with the Singapore Land Transport Authority to design a next-generation train with modern aesthetics, the new features incorporated advanced technology for improved performance and functionality, as well as enabling interchangeability with existing APM 100 vehicles. From 2022, the asset replacement is set to improve rail reliability, safety and availability for optimal performance of the Bukit Panjang LRT line.

The ride ahead

After two decade of services, the system achieved an improved performance and for the period of October 2018 to September 2019, it reached a rail reliability performance of 64,000 train-km before a delay of more than five minutes occurs on the system. Along with the Bukit Panjang LRT system upgrade, Bombardier will support a ten-year maintenance and spare part supply agreement to provide reliable services, ensuring that the authority and operator gain the maximum value from their assets over the lifetime of their system with proven competence. The renewed APM system will continue to set the high urban mobility standards for the Bukit Panjang LRT line and globally in the frame of Bombardier’s urban transit innovation.

Singapore LTA’s target is to expand its urban rail network to 360km by 2030, which creates demand and opportunities for rail manufacturers while driving innovation towards Singapore’s Smart Nation vision. Bombardier’s full spectrum of rail solutions, combining technology and performance with empathy, from driverless metros to automated people mover, helps deliver sustainable mobility and reduces energy consumption to create substantial benefits for operators, commuters and the environment.

Investing in Singapore for the last twenty years, Bombardier has delivered 276 driverless BOMBARDIERMOVIA metro cars for Singapore’s Downtown Mass Rapid Transit (MRT) line and 32 INNOVIA APM 100 cars for the Bukit Panjang LRT system. In 2018, two asset replacement contracts were awarded to supply 19 new INNOVIAAPM 300 cars for the Bukit Panjang LRT line and 396 MOVIA metro cars for the two high-capacity North-South and East-West MRT lines. Bombardier is committed to designing better trains, customizing solutions and creating better ways to move residents across Singapore, making sure Bombardier’s mobility solution works for the community and providing for the future.

Bukit Panjang LRT line APM — The renewed INNOVIA APM system will continue to set the high urban mobility standard for the Bukit Panjang LRT line and globally in the frame of Bombardier’s urban transit innovation.

Alstom to Supply Driverless Trains & Digital Signalling System for Sydney Metro Extension

November 23, 2019 / WIL BALDWIN

Australia’s biggest public transport project

22 November 2019 – The Northwest Rapid Transit Consortium (NRT) has reached contractual close for the extension to the existing NRT Public Private Partnership (PPP) contract on Sydney Metro.

The contract, which was awarded in 2014, has been extended to deliver a seamless customer experience on the new metro, with NRT to operate and maintain the full metro line from Rouse Hill to Bankstown – in total 66 kilometres of rail and 31 metro stations by 2024.

Alstom has signed a contract with NRT to supply the rolling stock and signalling system for the next stage of Sydney Metro, Sydney Metro City and Southwest. The project is an extension of the Metro North West Line, which successfully opened to customers in May 2019.

Under the contract, valued at approx. €350 million, Alstom will be responsible for the project management, design, supply, manufacturing, testing and commissioning of 23 six-car fully-automated Metropolis trains and the Urbalis 400 Communication Based Train Control (CBTC) signalling system. The trains will be manufactured in Alstom’s manufacturing centre in Sri City, India which successfully delivered 22 Metropolis trains for the Metro North West Line. The contract also includes an option to purchase further trains if required.

“Sydney Metro has been a game changer for the travelling public of Sydney and Alstom is delighted to continue to be a part of this iconic project. It strengthens Alstom’s position as the market leader for the supply of railway technologies in Australia.” said Ling Fang, Senior Vice President of Alstom Asia-Pacific.

As an extension of the existing Metro North West Line, the NRT PPP will provide a fully integrated turn-up and go service along a dedicated 66-kilometre metro network with a total of 31 stations from Rouse Hill through the City and to Bankstown. The Metro North West Line operator, Metro Trains Sydney, will be responsible for the operations and maintenance of the entire line.

The City and Southwest extension includes a 15km greenfield line with seven new stations plus the conversion of the existing suburban rail line to metro rail standards, covering a further 13km of track and 11 existing stations. The project also includes expansion of the current Sydney Metro Trains Facility at Rouse Hill and a new trains facility at Sydenham. Construction of the new line is currently underway with revenue service expected to start in 2024.

The Metropolis trains and digital signalling systems for the City & Southwest project will include the same design and features as the North West Line, designed to meet the specific needs of Sydney. According to the specifications, the new trains will meet strict sustainability criteria; a robust lightweight structure, low energy consumption, high levels of recoverability and recyclability, technical reliability and ease of maintenance. The trains will also be equipped with remote sensors for optimal maintenance planning.

Alstom has put sustainability and the passenger at the heart of its design process. The trains for Sydney will be built with the safety and comfort of passengers in mind, offering accessibility, wide doors and spaces to facilitate passenger flow, acoustic comfort, vibration mitigation and passenger information in real time.

Alstom’s metro trains are a world-leading, proven, safe and reliable train that serve many of the world’s great cities, including Paris, London, Amsterdam, Barcelona and Singapore. Alstom has more than 65 years’ experience in the production of metros, having sold over 17,000 metro cars that operate in 55 cities around the world and carry 30 million passengers every day.

Rouse Hill Station is on Sydney’s first metro line, Metro Northwest, which opened on 26 May, 2019. Services at the 13 metro stations operate every four minutes in the peak in each direction on Australia’s first driverless railway.

Collins Aerospace’s ARINC Rail Solution to Integrate Operations for Central Puget Sound Regional Transit Authority

October 11, 2019 / WIL BALDWIN

New Passenger Information Management System will create a single technology information delivery platform for Link light rail vehicles, Sounder Commuter Rail trains and Tacoma Link light rail vehicles
Secure, scalable and flexible to meet future agency expansion needs for all transit modes

ANNAPOLIS, Md. (Oct. 11, 2019) – The Central Puget Sound Regional Transit Authority – known as Sound Transit – will be streamlining its operations and improving the passenger experience via a new Passenger Information Management System (PIMS) being implemented by the ARINC rail solutions team at Collins Aerospace Systems, a business unit of United Technologies Corp. (NYSE: UTX).

PIMS will transform operations for Sound Transit’s Link light rail vehicles, Sounder Commuter Rail trains, and Tacoma Link light rail vehicles by integrating information services for all three transit modes into a single enterprise solution. Doing so will enable real-time data acquisition and processing to predict train arrival, which can provide passengers with reliable and accurate audio and visual message delivery on all rail cars and transit platforms. In addition, the solution will offer a Google Transit Feed to be used by Sound Transit to transmit messaging to the general public via the Internet. This open architecture-based solution provides the scalability and flexibility required for any future agency expansion needs across all transit modes.

Along with the strict and rigorous requirements for sustained operations, open integration and prediction/arrival train calculations, cybersecurity for the PIMS project and other critical digital systems is at the forefront for Sound Transit. The ARINC cybersecurity team will be performing security hardening and implementation services aligned with American Public Transportation Authority guidelines and best practices throughout every stage of the project from the design phase to system commissioning and throughout revenue service. Applying these tools and techniques will reduce vulnerabilities within the PIMS systems and applications on a continuous basis.

“As the current provider of Sound Transit’s train control system, we will leverage technology and provide new applications that build upon our current passenger information product suite to quickly design, integrate, secure and install the next generation PIMS solution,” said Frank Koren, director of Business Development within the Information Management Services division at Collins Aerospace. “Sound Transit has committed to significantly expand its transit services, which comes with the need to provide ongoing high-quality customer experiences. Our proven track record of developing cutting-edge customer information systems will help them ensure they do so for years to come.”

*Collins Aerospace is providing Sound Transit with a Passenger Information Management System to help streamline its operations and improve the passenger experience.*

Los Angeles World Airports Break Ground on New Consolidated Rental Car Facility

September 12, 2019 / WIL BALDWIN

Once completed in 2023, the $2 billion transit hub will be the largest facility of its kind in the world with a vehicle leaving every two seconds at peak operations

Board of Airport Commissioners (BOAC) Commissioner Bea Hsu, BOAC Commissioner Gabriel Eshaghian, BOAC Vice President Valeria Velasco, BOAC President Sean Burton, Los Angeles World Airports (LAWA) Chief Executive Officer Deborah Flint, Councilmember Joe Buscaino, Mayor Eric Garcetti, Councilmember Mike Bonin, Deputy Mayor Billy Chun, Director of Economic Infrastructure -Office of Mayor Garcetti David Reich, LAWA Chief Operating Officer Justin Erbacci, LAWA Chief Development Officer Bernardo Gogna and LAX ConRAC Partners Project Executive Karl Schaefer.

(Los Angeles, CA) Mayor Eric Garcetti broke ground today on the Consolidated Rent-A-Car (ConRAC) facility at Los Angeles International Airport (LAX), which will centralize rental car operations into one convenient location and offer a direct connection to the upcoming Automated People Mover (APM) train. The Mayor was joined at the ceremony by Councilmembers Mike Bonin and Joe Buscaino, Los Angeles County Supervisor Mark Ridley-Thomas, Board of Airport Commissioners (BOAC) President Sean Burton, and Los Angeles World Airports (LAWA) CEO Deborah Flint, as well as community and labor leaders.

“We are building the world-class airport travelers need and deserve — and the Consolidated Rent-A-Car facility groundbreaking demonstrates how we’re keeping this promise,” said Mayor Garcetti. “Our city is doing so much more than building a parking structure — we are making an investment that will improve the traveling experience, reduce congestion in surrounding neighborhoods, and create middle-class careers for years to come.”

Since taking office, Mayor Garcetti has led a more than $14 billion transformation of LAX that began in 2009. Mayor Garcetti’s historic infrastructure investments have strengthened working families and the middle class. Under his leadership, unemployment has been cut in half while close to 200,000 new jobs have been created. Construction of the ConRAC is expected to create more than 1,000 jobs.

The 5.3 million square foot ConRAC facility will feature 18,000 parking stalls with 6,600 ready/return spaces, 10,000 idle vehicle storage spaces, and 1,100 rental car employee spaces as well as visitor parking. A Quick-Turn Around facility will also be on-site, allowing for fueling, washing, and light maintenance of rental car vehicles.

Mayor Eric Garcetti provides remarks during the groundbreaking ceremony.

Reducing congestion at LAX — as well as in surrounding communities — is at the heart of the ConRAC project. The consolidated facility will completely remove rental car shuttle traffic from the Central Terminal Area (CTA), which equates to 3,200 shuttle trips per day. The removal of the shuttles will improve traffic on the roadways and free up critical curbside boarding space in the CTA.

“This is a big step toward LAX becoming a world-class airport for travelers and a first-class neighbor to Westchester and Playa del Rey,” said Councilmember Mike Bonin. “Especially once it is connected to the new Automated People Mover, this new Consolidated Rent-A-Car Facility will reduce the number of shuttles and vans navigating the Central Terminal Area and nearby neighborhoods, improving both local traffic and air quality. That is a big win and exciting progress to celebrate.”

“This has been a momentous year for LAX,” said Councilmember Joe Buscaino. “LAX continues to move full steam ahead with its $14 billion investment to create a fully transformed airport of the future. The ConRAC is just one of the many groundbreakings held this year which highlight the efforts LAX is making to improve passenger experience which increases tourism and improves our local economy.”

As the second largest rental car market among domestic airports, the ConRAC will improve and streamline the car rental process at LAX. The facility will be built with an eye to the future and designed to accommodate new and emerging vehicle types such as autonomous vehicles. Additionally, movable concrete barriers will allow for the quick reallocation of space as rental car companies’ market shares shift.

The ConRAC is an important component of the Landside Access Modernization Program (LAMP), which also includes an Automated People Mover train that will connect travelers directly to airport terminals and create new and convenient locations for passenger pick-up and drop-off outside the Central Terminal Area. Once completed in 2023, the APM will connect with L.A. Metro’s light rail system.

*Rendering of the ConRAC Facility at night.*

“The ConRAC Facility will provide a rental car experience worthy of a world-class airport,” said BOAC President Sean Burton. “This project doesn’t just benefit those renting cars — it benefits the local economy and community through the creation of 1,000 jobs and by relieving vehicle congestion on the roads in and around LAX.”

“We are future-proofing everything we build at LAX,” said Deborah Flint, CEO, LAWA. “Every project under construction or on the drawing board will meet our needs now and be capable of adapting to new technology and demands. The ConRAC Facility is a prime example of how to future-proof so we can protect our investments.”

On October 26, 2018, the Los Angeles City Council approved an approximately $2 billion public-private partnership between LAWA and LAX ConRAC Partners (LAXCP), with LAXCP designing, building, financing, operating, and maintaining the facility for a 28-year period. LAXCP has committed to 30% local hiring, which exceeds local hiring requirements, and together with LAWA is developing opportunities for local small businesses. LAXCP has also agreed to sponsor 100 new, local apprentices and feature all-union labor on the ConRAC facility.

“Collectively, the LAXCP team has extensive experience designing, building, and operating nearly 30 ConRACs domestically and internationally,” said Karl Schaefer, LAXCP Project Executive. “We are proud to use our shared know how to help LAWA create a top tier experience for the traveling public at LAX while we honor our commitment to provide local hire economic opportunities and environmental sustainability.”

Mayor Garcetti has made sustainability a priority of his administration. The ConRAC facility is designed to reflect Los Angeles’ standing as one of the world’s leading sustainable cities and will include native drought-tolerant landscaping, reclaimed water usage, more than 200 Level 2 electric vehicle chargers, and a solar farm generating over 8,400 megawatt hours annually.

Alstom Delivers First Coradia Polyvalent Regional Train

August 28, 2019 / WIL BALDWIN

27 August 2019 – Alstom has delivered the first five Coradia Polyvalent Léman Express trains for the cross-border CEVA[1] line to the SNCF Technicentre in Annemasse. Five trains will now be delivered each month until the end of November, with entry into commercial service scheduled for 15 December 2019. Since mid-August, Alstom’s teams have been supporting SNCF in training drivers for these new trains.

A total of 17 trains from Alstom’s Coradia Polyvalent range have been ordered[2] by SNCF, financed entirely by the region of Auvergne-Rhône-Alpes, to run on the Léman Express, Europe’s largest cross-border rail network (45 stations, 230 km). The Coradia Polyvalent Léman Express trains contribute to providing a sustainable alternative to the car for the daily commutes of Greater Geneva’s residents, as well as a better service to the economic and tourist hubs of the entire region. Today, just 16% of the 550,000 daily cross-border trips are made on public transport.

The Coradia Polyvalent Léman Express trains belong to Alstom’s Coradia range, of which 348 trains have been sold to 9 French regions[3] as part of the contract awarded to Alstom by SNCF in October 2009. The fleet has already covered more than 50 million kilometres in commercial service.

The trains have been adapted to the specific characteristics of the Franco-Swiss cross-border CEVA line: configured in their suburban version, each 72-metre train can carry up to 204 seated passengers at speeds of up to 140 km/h, in accordance with Swiss certification. Designed to ensure cross-border connections with ERTMS technology[4], Coradia Polyvalent Léman Express trains can run on several types of network voltages[5].

To optimise the fluidity of passenger exchanges and reduce stopping time in stations, the Coradia Polyvalent Léman Express trains are equipped with a full low floor, seven doors on each side, all with bridge plates, and a large reception area on the platforms. Coradia Polyvalent is the first train to comply with the PRM-TSI standard^[6]. The interior offers increased comfort thanks to the seats equipped with individual reading lights and electrical sockets and the spaces dedicated to bicycles and luggage. Large windows and reduced noise levels also improve the quality of the journey.

The manufacturing of Coradia Polyvalent involves more than 4,000 jobs in France at Alstom and its suppliers. Six of Alstom’s 13 sites in France are involved in the project: Reichshoffen for the design and assembly, Ornans for the engines, Le Creusot for the bogies, Tarbes for the traction chains, Villeurbanne for the on-board computerised systems and signalling products, and Saint-Ouen for the design.

[1] Cornavin – Eaux-Vives – Annemasse line

[2] Option exercised in July 2015 for the sum of 160 million euros

[3] Including 10 additional Léman Express trains for the Auvergne-Rhône-Alpes region in July 2019 (approximately 70 million euros)

[4] European rail interoperability standard

[5] 25 kV, 1500 V and 15kV for Germany and Switzerland

[6] Technical specifications for interoperability relating to persons with reduced mobility

Singapore’s Bukit Panjang LRT line

The suburban town

Upgrading Bukit Panjang

The ride ahead

Archives