TOMORROWS TRANSPORTATION NEWS TODAY!

Tag: command (Page 3 of 3)

Airbus Pulls Out of Canada Fighter Jet Race

OTTAWA (Reuters) – Airbus SE <EADSY> on Friday pulled out of a multibillion-dollar competition to supply Canada with 88 new fighter jets, a decision that boosts the chances of rival Lockheed Martin Corp <LMT>.

The defense arm of Airbus, which indicated last month it might withdraw, cited onerous security requirements and a late decision by Ottawa to loosen the rules for how much bidders would have to invest in Canada.

Airbus and other contenders had already complained the government appeared to be tilting the race in favor of Lockheed Martin’s F-35 plane, which the Royal Canadian Air Force wants. Canada is part of the consortium that developed the plane.

Canada launched the long-delayed competition last month and said it was confident no favoritism had been shown. Ottawa says the contract is worth between C$15 billion ($11.30 billion) and C$19 billion.

Canada’s official opposition Conservative Party, which is seeking to defeat Liberal Prime Minister Justin Trudeau in an October election, accused the government of gross mismanagement.

Reuters revealed in July that Airbus and Boeing Co <BA.N> had written to Ottawa to say they might pull out.

The firms are unhappy that in late May, the government dropped a demand that bidders must guarantee to give Canadian businesses 100% of the value of the deal in economic benefits.

Such legally watertight commitments, which Boeing, Airbus and Sweden’s Saab AB <SAABb.ST> had already agreed to, contradict rules of the F-35 consortium. Ottawa’s move allowed Lockheed Martin to stay in the competition.

“One of the strongest points of our bid was the fact we were willing to make binding commitments,” said an Airbus source, who requested anonymity given the sensitivity of the situation.

“Once this was loosened up to a point where these commitments were no longer valued in the same way”, the firm decided “that’s just too much”, added the source, who also cited security challenges.

European jets must show they can meet stringent standards required by the United States, which with Canada operates the North American Aerospace Defense Command.

“NORAD security requirements continue to place too significant of a cost on platforms whose manufacture and repair chains sit outside the United States (and) Canada,” Airbus said in a statement.

Canadian Procurement Minister Carla Qualtrough said she respected the Airbus decision, adding Ottawa was determined there should be a level playing field.

“This included adapting the economic benefits approach to ensure the highest level of participation among suppliers,” she said in emailed comments.

Canada has been trying unsuccessfully for almost a decade to purchase replacements for its aging F-18 fighters. The former Conservative administration said in 2010 it would buy 65 F-35 jets but later scrapped the decision, triggering years of delays and reviews.

Trudeau’s Liberals took power in 2015 vowing not to buy the F-35 on the grounds that it was too costly, but have since softened their line.

“Justin Trudeau has spent the past four years delaying and dithering on new fighter jets for Canada only to completely mismanage the competition process,” said Conservative defense spokesman James Bezan.

Lockheed Martin declined to comment while Boeing and Saab did not respond to requests for comment.

($1 = 1.3275 Canadian dollars)

(Reporting by David Ljunggren; Editing by David Gregorio)

BAE Wins $45 Million Extended Range Cannon Contract

The U.S. Army has awarded BAE Systems a $45 million contract for the Extended Range Cannon Artillery (ERCA) Increment 1 prototype with the purpose of increasing the range and rate of fire on current and future M109A7 self-propelled howitzers.

The development of ERCA is in collaboration with the Army’s Combat Capabilities Development Command (CCDC) Armaments Center.

This prototype phase will address capability gaps in the Army’s indirect fire systems and improve the rate and range of fire with the development of power distribution software and hardware integration solutions. ERCA will be integrated onto the M109A7 and will require the M109A7’s current 39-caliber turret to be replaced with a 58-caliber, 30-foot long gun barrel with the objective of creating firepower double the current range.

“ERCA is a significant technological step forward for the Army’s artillery portfolio,” said Scott Davis, vice president or programs, BAE Systems’ Combat Vehicles business. “We were selected based on our years of experience in the development of self-propelled howitzer systems. Long-range precision fire is a top priority for the Army, and we are pleased to be a partner in efforts to equip soldiers with the latest technology.”

The development program aims to provide the warfighter with extended range while maintaining the weight found in current systems to minimize performance impacts on the chassis. Under separate contracts, BAE Systems is also developing precision guidance kits with anti-jamming capabilities (PGK-AJ) that can operate in the challenging ERCA firing environment. PGK-AJ is compatible with existing and new long-range rounds for multiple firing platforms, including the M109 self-propelled howitzer.

BAE Systems is currently producing the M109A7 configuration for the Army in the low-rate initial production phase.

Development work on ERCA Self Propelled Howitzer will take place at the Army’s Picatinny Arsenal and BAE Systems’ facilities in York, Pennsylvania; Sterling Heights, Michigan and Minneapolis, Minnesota.

David Schacher Photography LLC

Sikorsky Gets Contract for 12 CH-53K Heavy Lift Helicopters

STRATFORD, Conn., May 17, 2019 /PRNewswire/ — Sikorsky, a Lockheed Martin company (NYSE: LMT) will build 12 production CH-53K King Stallion helicopters under a new $1.13 billion contract from the U.S. Navy. These advanced helicopters are part of the 200 program of record aircraft for the U.S. Marine Corps.

Under the terms of the contract, known as Low Rate Initial Production (LRIP) Lot 2 and 3, Sikorsky will begin deliveries of 12 CH-53K helicopters in 2022, and also provide spares and logistical support. Sikorsky remains committed to continuing to reduce costs over the life of the program.

“I’m proud of the joint government and industry team in achieving this award,” said Col. Jack Perrin, U.S. Marine Corps program manager for the Naval Air Systems Command’s Heavy Lift Helicopters program, PMA-261.

The CH-53K is the only sea-based, long range, heavy-lift helicopter in production and will immediately provide three times the lift capability of its predecessor. The CH-53K will conduct expeditionary heavy-lift transport of armored vehicles, equipment, and personnel to support distributed operations deep inland from a sea-based center of operations. The new CH-53K will have heavy-lift capabilities that exceed all other DoD rotary wing-platforms and it is the only heavy lifter that will remain in production through 2032 and beyond.

“Sikorsky employees and our nationwide supply chain are ready to ramp up CH-53K production to support deployment of this modern, safe and reliable aircraft in 2023-2024,” said Sikorsky Program Director Bill Falk. “This contract demonstrates the U.S. Marine Corps’ confidence in Sikorsky to expand production of this technologically advanced heavy lift helicopter.”

Lockheed Martin, Sikorsky, and its suppliers have made significant investments in facilities, machinery, tooling, and workforce training to ramp-up production required for the CH-53K program. For example, we have installed more than eight new titanium machining centers, designed and implemented a new final assembly test facility with multi-floor ergonomic work platforms, installed 10-ton cranes, and now have 3D work instructions on the factory floor.

“We have transformed our factory for the future and implemented a model for all future helicopter programs,” Falk said. “Additionally, our engineers have implemented the latest technologies such as manufacturing simulation and 3D laser inspection technology. These investments in systems, personnel, and our facilities have elevated Sikorsky’s manufacturing technology and capabilities to meet production requirements of the CH-53K for domestic and international customers.”

King Stallion Progress Update

The all-new CH-53K, designed to be intelligent, reliable, low maintenance and survivable in the most difficult conditions, has flown more than 1,400 test hours and has met all the outer reaches of the test envelope. The King Stallion is in the midst of a rigorous test program to ensure militaries can safely move troops and equipment at higher altitudes, quicker and more effectively than ever.

The CH-53K, which has proven it can lift more than 36,000 pounds, is the most powerful heavy lift helicopter ever built in the United States. The King Stallion’s technologically advanced design will meet the future warfighting requirements for decades to come, enabling missions like humanitarian aid, troop and equipment transport, casualty evacuation (CASEVAC), support of special operations forces, and combat search and rescue (CSAR).

Accomplishments to date include: high altitude, hot temperature, and degraded visual environment flights, maximum weight single-point cargo hook sling load of 36,000 pounds (16,329 kilograms); forward flight speed of over 200 knots; 60 degrees angle of bank turns; altitude of 18,500 feet mean sea level (MSL); 12-degree slope landings and takeoffs; external load auto-jettison; and gunfire testing.

For additional information, visit www.ch-53k.com.

About Lockheed Martin

Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.

The CH-53K is a modern, marinized, fly-by-wire aircraft that can move more cargo, farther and at longer distances that any other aircraft in production. For example, the CH-53K can lift an up-armored 22,600 lb. JLTV and carry it 110 nautical miles, in high and hot conditions and still have capacity for an additional 4,400 pounds of payload. There is no other helicopter that comes close to the performance of the CH-53K or that can meet Marine Corps requirements. Photo courtesy U.S. Navy.

Dassault Aviation Starts Office Construction at Mérignac Plant

Mérignac, France, 14 May 2019 – Today, Dassault Aviation officially launched the construction of an office building on its site in Mérignac, France, as a step of its “Leading our Future” transformation plan. The building will accommodate design, development and after-sales support teams for the firm’s civil and defense activities.

“This ambitious project reflects our aim to bring together some of the teams who design and support our aircraft and those responsible for producing them. It fosters collaborative working as part of the rollout of our extended design office concept. The principle is to integrate even more and whenever required, from the design phase, all the trades involved in the product life cycle. This building will not just house offices, it will be one of the means to reframe the interactions between Mérignac and Saint-Cloud. We are expecting better links between technical competence, product knowledge and customer services”, said Eric Trappier, Chairman and CEO of Dassault Aviation. “It is one of the focuses of our transformation plan which, without altering the DNA that has underpinned our century-long success, aims to make our company more flexible and more competitive to respond to the technology challenges ahead and the changes occurring in the world around us.”

The new building will offer 25,800 sq. m of surface area over four levels with a total capacity of 1,500 workstations including 24 modular collaborative work spaces and nine project offices. The building will also provide VIP rooms for our civil and military customers, a Falcon command center, rooms for aircraft system test benches, a Virtual Reality Center, an Immersive Reality Center and an auditorium.

The highest environmental standards will be applied including smart lighting and energy management, solar panels (4,000 sq. m), reinforced insulation, green roofs, and a heat recovery system.

Presided over by Eric Trappier, alongside Valérie Guillemet, Mérignac Site Manager, the “groundbreaking” ceremony was attended by many local elected representatives, particularly the President of the Nouvelle-Aquitaine Region Alain Rousset, the President of Bordeaux Métropole Patrick Bobet, the Mayor of Mérignac Alain Anziani and the Mayor of Bordeaux Nicolas Florian. Representatives of official services, as well as the region’s aviation ecosystem and the media were also present at the event.

Work is scheduled for completion at the end of 2020, and the building should be commissioned in 2021.

About Dassault Aviation

With over 10,000 military and civil aircraft delivered in more than 90 countries over the last century, Dassault Aviation has built up expertise recognized worldwide in the design, development, sale and support of all types of aircraft, ranging from the Rafale fighter, to the high-end Falcon family of business jets and military drones. In 2018, Dassault Aviation reported revenues of €5.1 billion. The company has 11,500 employees.

Twitter : @Dassault_OnAir

Newer posts »