Alstom has successfully supplied, tested and commissioned part of Cairo Metro line 3 – Ph4 with a total of 10 stations from Heliopolis to Adly Mansour. His excellency the Egyptian President Abdel Fattah Al Sisi, the Prime Minister Dr. Mostafa Madbouly and the Minister of Transport, Kamel El Wazir, have inaugurated the line with the presence of Dr. Essam Wally the Chairman of NAT (National Authority for Tunnels), and Mena AZER, Project Manager of Alstom Egypt.
In May 2015, NAT awarded Alstom, as a consortium leader, a contract to provide system and subsystem design, manufacturing, installation, testing / commissioning, training, maintenance for signaling, centralized control and telecommunication systems for Cairo Metro line 3 Phase 4A. On the same date, NAT awarded Alstom, as a member of the G3 Power Supply Consortium, a contract for the design, supply, installation, testing, commissioning, training, maintenance of power traction system (Rectifier Stations, Lighting and Power Stations & Annexes Structure and Switch Rooms).
In November 2017, the Egyptian Joint venture of Orascom and Arab contractor as main contractor for Ph4B, awarded Alstom a sub-contract to extend the Cairo Metro Line 3 with additional 4 stations & Main Depot (Adly Mansour).
Urbalis is an advanced signalling system that helps operators to ease commuter congestion. Constantly upgraded, the solution aids urban operators in maximizing their performance and capacity while providing standard supervision and control supporting their operational needs. Designed for heavy ridership metros, the system offers a considerable range of functions that improve headway and average speed performance.
Alstom has been present in Egypt for over 40 years and has contributed to support the strong trend of railway infrastructure development in the country. Over decades, Alstom Egypt has developed a local talent pool that is today in charge of a center of excellence related to Signaling, Power Supply and Depot Equipment which is supporting our projects within all MEA region. It is this heritage that has allowed Alstom Egypt to make a significant contribution to Egypt’s rail industry development.
The Alstom-led consortium with Taiwanese engineering and contracting services company CTCI reached contractual close on 23 June 2020 for the Phase Two extension of Taipei Metro Line 7. The contract is valued at close to €424 million, with an Alstom share of approximately €248 million.
Phase One, which was awarded by Systemwide E&M Project Office Department of Rapid Transit Systems of Taipei City Government (SEMPO) in 2018, has been extended to deliver a seamless customer experience on the new metro line, spanning an additional 13.3km with 13 stations as part of Phase Two. When fully completed around late 2028, the 22.8-kilometre medium-capacity metro line, also known as Wanda Zhonghe Shulin Line, will connect Taipei City to New Taipei City more seamlessly. In addition, passengers can look forward to more convenience travelling between the various districts within New Taipei City such as Chong-he, Shu-lin, Tu-chen, Xin-zhuang.
Under the contract, Alstom will be responsible for the design, supply, manufacturing, testing and commissioning of 16 additional fully automated, four-car Metropolis trains, Urbalis 400 Communication Based Train Control (CBTC) signalling system, Supervisory Control and Data Acquisition (SCADA) system, as well as platform screen doors. The trains will be manufactured in Alstom’s Taubaté factory in Brazil, while the signalling system will be delivered by its Saint-Ouen site in France and Bangalore site in India. Alstom and CTCI will also jointly carry out project management and system integration. CTCI will provide the track work, power supply, depot equipment, Telecommunication and Ticketing systems.
“Taipei Metro Line 7, which interchanges with five other lines, will be a game changer for the travelling public of Taipei, and Alstom is delighted to continue to be a part of this iconic project. The success of this project extension with SEMPO positions us as a reliable and trusted partner, established for the long term in Taiwan and well beyond our 40 years of active presence,” said Ling Fang, Senior Vice President of Alstom Asia-Pacific.
Alstom’s metros are world-leading, proven, safe and reliable trains that serve many of the world’s great cities, including Amsterdam, Barcelona, London, Paris and Singapore. Alstom has more than 65 years’ experience in the production of metros, having sold over 17,000 metro cars that operate in 55 cities around the world and carry 30 million passengers every day.
In Taiwan, Alstom provides signalling systems to all but one of Taipei’s metro lines and is currently supplying a driverless signalling system for Taichung Green metro line. In 2017, Alstom won its first tramway project in Taiwan, supplying its latest Citadis tram to Kaohsiung tramway line phase two.
Alstom-led consortium delivers extension of Dubai Metro Red Line
A full turnkey integrated system
15km-long
50 Metropolis trainsets
Total value of the project is €2.6 billion
Alstom congratulates Dubai’s Roads and Transport Authority (RTA), on the inauguration of the Dubai Route 2020 Metro. This iconic project was ceremonially inaugurated by H. H. Sheikh Mohammed bin Rashid Al Maktoum, Vice President and Prime Minister of the United Arab Emirates, and Ruler of the Emirate of Dubai on 7 July 2020, and was also attended by Henri Poupart-Lafarge, Alstom’s CEO and Chairman of the Board as well as the top management of the ExpoLink Consortium via video conference technology.
The new line project, commenced in July 2016 and carried out by the Alstom-led ExpoLink consortium, also composed of ACCIONA and Gülermak, consists of a 15km-long line, of which 11.8km is above ground and 3.2km underground, and an interchange on the Red Line. The extension of the metro has seven stations including Jabel Ali Station and the flagship metro station at the Expo exhibition site. The project is worth a total of €2.6 billion.
As part of the Consortium, Alstom was responsible for the integration of the entire metro system including 50 Metropolis trainsets produced in Alstom’s site in Katowice, Poland, power supply, communication, signalling, automatic ticket control, track works, platform screen doors and a three-year warranty on the whole system, as well as the enhancement of the existing metro line by upgrading power supply, signalling systems, miscellaneous communication and track works. The trainsets are 85.5 meters long and composed of five cars per trainset, and they will be able to carry up to 696 passengers each.
The train offers an excellent level of passenger experience, thanks to wide gangways, large doors and windows, three specific areas for Silver, Family and Gold Classes. Eco-friendly, the train is equipped with a full electrical braking system, LED lighting and other innovations to reduce energy consumption.
Alstom is a dedicated and long-standing partner of Dubai’s transportation and mobility development. Alstom delivered the Dubai tramway, the first fully integrated tramway system in the Middle East and the world’s first 100% catenary-free line, which was opened in November 2014. Alstom is also in charge of the maintenance of the Dubai Tram for a period of 13 years.
With around 4,500 train cars already delivered, Bombardier’s Chinese joint venture is the only Sino-foreign entity to win a new Chinese standard high-speed train bid
New Chinese standard high-speed train cars to enhance passenger experience and contribute to the expansion of the world’s longest high-speed rail network
Global mobility solution provider Bombardier Transportation announced today that its Chinese joint venture, Bombardier Sifang (Qingdao) Transportation Ltd. (BST), has been awarded a contract from China State Railway Group Co., Ltd. (CHINA RAILWAY) to supply 160 CR400AF cars, a new Chinese standard high-speed train car for China’s evolving high-speed rail network. The 160 cars will be configured into ten 16-car trainsets with an operating speed of 350 km/h. The total contract is valued at approximately 2.97 billion CNY ($427 million US, 380 million euro). Bombardier Transportation owns 50 per cent of the shares in BST, which is consolidated by Bombardier Transportation’s partner CRRC Sifang Rolling Stock Co., Ltd.
Jianwei Zhang, President, Bombardier Transportation China, said, “We are very proud to have been chosen to supply the new generation of CR400AF cars, a high-speed railway car, through our BST joint venture. China’s high-speed rail industry has become one of the nation’s economic pillar industries and the high-speed network has brought greater mobility and prosperity to the public. Bombardier is proud of its contributions to China’s rail industry and looks forward to delivering more of the high-quality products that are helping China meet its ambitious long-term mobility goals.”
In 2018, BST won two contracts to build a total of 288 CR400AF cars and every car was delivered on-time and on quality. This latest contract is BST’s third and reflects the trust that CHINA RAILWAY has in BST’s efficiency, reliability and competitive edge. All 160 cars will be delivered by mid-2020.
Bombardier Transportation in China is the full solution provider across the entire value chain. From vehicles and propulsion to services and design, Bombardier Transportation in China has seven joint ventures, six wholly foreign-owned enterprises, and more than 8,000 employees. Together, the joint ventures have delivered 4,500 railway passenger cars, 580 electric locomotives and over 2,500 metro cars, Monorail, APM, and trams to China’s growing rail transit markets. It is a major signalling supplier to the Chinese high-speed network and through its joint ventures, propulsion equipment and signalling systems are utilized in a total of 30 Chinese cities.
Total of 31 metro trainsets comprising of 248 cars will be manufactured at the company’s state-of-the-art plant at SriCity
Alstom, leader in sustainable and smart mobility, today commenced the manufacturing of metro trainsets for Mumbai Metro Rail Corporation (MMRC) at its factory in SriCity, Andhra Pradesh. The ceremony was preceded by Mr. Alain Spohr – MD, Alstom India & South Asia. The first metro train after testing will be delivered by November 2020.
Alstom’s overall contract with MMRC for Line 3 is worth €452 million. The order includes manufacturing of 31 lightweight, fully-furnished modern metro trains of 8 cars each. Along with rolling stock, Alstom will also execute the power supply contract and equip Line 3 with Urbalis 400, its latest generation of CBTC signalling technology. The scope of the signalling contract includes unattended train operation (UTO), computer-based interlocking and centralised train supervision; an integrated telecom solution comprising of CCTV, passenger information, passenger annoncement and Giga bit network; platform screen doors, as well as the electrical and mechanical supervisory control and data acquisition system (E&M SCADA).
Speaking on the occasion, Alain Spohr, Managing Director of Alstom India and South Asia said, “This will be the new face of transportation for the commercial capital of India. Mumbai is a global city and it is set to get a world-class metro experience. The trainsets are custom-designed for Mumbai. Themed on Dynamic Fluidism that takes inspiration from the city, the train prioritises high interior density layout to maximise space efficiency. The trainsets will be able to accomodate at least 3000 people on a single trip, easing daily commute for Mumbaikars.”
He further added, “As announced earlier, we are on track to double our manufacturing capacity at SriCity – from 240 to 480 trainsets per annum. The factory is currently executing orders for Chennai Metro, Montreal Metro (Réseau Express Métropolitain) and Mumbai Metro Line 3. Alstom recently won a contract with Sydney’s NRT to supply the rolling stock and signalling system for the next stage of Sydney Metro. 23 six-car fully-automated Metropolis trains for the project will be manufactured at our SriCity facility.”
The Aqua Line trainsets will feature a host of safety elements including CCTV cameras, smoke detectors, emergency intercoms, fire extinguishers with wider detrainment doors to quickly evacuate passengers in case of an emergency. The inclusive design of trainsets will serve to the differently-abled individuals with ease of travel and includes dedicated space for wheelchair in every car. The overall exterior and interiors of the trainset are inspired by the undying energy of Mumbai and its people who are always on the move and hustle all day long.
Alstom will also train maintenance and operations staff for the project. It is also the first time that any metro train in India will have 75% motorization, enabling quick acceleration and deceleration thereby bringing about greater efficiency in operations. The trains will also be equipped with regenerative braking system aiding significant reduction in carbon emissions. In addition to the above features, it is the first UTO (Unattended Train Operation) project in Mumbai.
Alstom is to carry out the renewal and automation of Marseille metro for the sum of 430 million euros financed by Métropole Aix-Marseille-Provence. As part of this contract, Alstom will develop, supply and install the operating system and equipment for the automatic operation of the network’s two lines. Alstom will also commission 38 new rubber-tyred metros (4 cars) and modernise all the audiovisual passenger information inside the stations. The new trains are scheduled to enter service in early 2024.
The trains will run in semi-automatic mode with drivers until mid-2025 on line M2 and until 2026 on line M1, before switching to full automation.
“It is a great honour for us to contribute to modernising the mobility offer of Métropole Aix-Marseille-Provence. Our metro experts are already at work on several of our French sites to get started quickly with developments,” says Jean-Baptiste Eyméoud, Senior Vice-President France at Alstom.
The new trains, based on Alstom’s rubber-tyred metro solutions, will incorporate the latest technological developments to increase comfort, availability, accessibility and passenger information, as well as facilitate maintenance.
Each 4-car train, 65 metres long and in “boa”[1] configuration, will be able to carry up to 500 passengers[2]. The sleekly designed trains will feature large bay windows, a highly efficient air conditioning system and modern passenger information systems, providing a pleasant on-board experience. Alstom called on Marseille designers Ora-ïto and Fabien Bourdier for the design and the sound conception of the new trains.
Three designs were proposed to the Metropole Aix-Marseille-Provence, which chose to set up an Internet consultation to give residents the opportunity to give their opinion on the design they would like to see selected.
The new metros for Marseille are environmentally friendly and will be eco-designed, enabling them to be 96% recoverable at the end of their lifespan. They will consume 25% less energy than the metros currently in service, thanks in particular to electric braking (up to 0 km/h), LED lighting and other optimisations.
For the automation system, Alstom will provide its Urbalis 400 solution, already deployed on more than 1,500 kilometres of metro lines worldwide. The Marseille metro will benefit from a proven, continuously improved system (on-board computers equipped with the latest technology, vital computers that are over 99% available, beacon tracker, etc.).
Alstom currently equips 25% of the CBTC[3] metro automations in service (60 lines, including 28 fully automated lines).
In total, more than 400 people in France will work on this project, including more than 60 in Métropole Aix-Marseille-Provence. Jobs will also be generated at our suppliers in France, but also in the Métropole for the installation and deployment of the signalling system.
Alstom will draw on the excellent skills of six of its French sites: Aix-en-Provence for the project management, Valenciennes for the design, interior layout, assembly, tests and validation of the trains, Ornans for the engines, Le Creusot for the bogies, Villeurbanne for the on-board electronics, passenger information, predictive maintenance and signalling system equipment, and Saint-Ouen for the coordination of the artistic design, development and integration of the signalling system.
Alstom will provide new cars for service to the enlarged Line E of Buenos Aires City metro, which represent a notable improvement for the metro cars of this line and an increase in passengers comfort.
The modernized cars of the series 100 produced by Alstom are incorporated into this line in which around more than 100,000 passengers travel per day, from the Plaza de los Virreyes station to Retiro in the centre of Buenos Aires. This modernization is in addition to the installation and validation of the signalling system in the three new stations of the E Line, completed successfully at the beginning of June.
Those metro cars are subject to a general review after 15 years to ensure their safety and efficiency. This “half-life” maintenance includes the disassembly, polishing, cleaning, profiling and painting or absolute replacement of all cars pieces and parts that are sent to Los Hornos workshop, in Las Plata. In that, full repair and maintenance’s are done by fifty professionals and workers, mostly from the same city, who works daily in the renovation of the cars that are part of the Buenos Aires metro network.
“The modernization of these series 100 cars for Line E is another proof of the enormous efforts that Alstom makes daily in its factory of Los Hornos to improve the travel´s quality of the thousands of users of the Buenos Aires city metro. To this we must add the activities that we have carried out recently in the expansion of Line E, with the incorporation of our state-of-the-art signalling system. We are proud of our customer’s trust in our experience, and we continue to bet on transforming the Argentine transport system” says Ernesto Garberoglio, General Director of Alstom Argentina.
Alstom has been present in Argentina since 1993, maintaining its presence over the years, which demonstrates a strong commitment to the country and its inhabitants. Dedicated to the transport sector on rails, it provides products and services to the metro operator of the City of Buenos Aires (Metrovías) and to the owner of the metro infrastructure (SBASE). It also has projects with Argentine Railways Infrastructure (formerly ADIFSE) and with the Railway Operator State’s Society (SOFSE) in the implementation of technological solutions for passenger and commercial transport.
22 November 2019 – The Northwest Rapid Transit Consortium (NRT) has reached contractual close for the extension to the existing NRT Public Private Partnership (PPP) contract on Sydney Metro.
The contract, which was awarded in 2014, has been extended to deliver a seamless customer experience on the new metro, with NRT to operate and maintain the full metro line from Rouse Hill to Bankstown – in total 66 kilometres of rail and 31 metro stations by 2024.
Alstom has signed a contract with NRT to supply the rolling stock and signalling system for the next stage of Sydney Metro, Sydney Metro City and Southwest. The project is an extension of the Metro North West Line, which successfully opened to customers in May 2019.
Under the contract, valued at approx. €350 million, Alstom will be responsible for the project management, design, supply, manufacturing, testing and commissioning of 23 six-car fully-automated Metropolis trains and the Urbalis 400 Communication Based Train Control (CBTC) signalling system. The trains will be manufactured in Alstom’s manufacturing centre in Sri City, India which successfully delivered 22 Metropolis trains for the Metro North West Line. The contract also includes an option to purchase further trains if required.
“Sydney Metro has been a game changer for the travelling public of Sydney and Alstom is delighted to continue to be a part of this iconic project. It strengthens Alstom’s position as the market leader for the supply of railway technologies in Australia.” said Ling Fang, Senior Vice President of Alstom Asia-Pacific.
As an extension of the existing Metro North West Line, the NRT PPP will provide a fully integrated turn-up and go service along a dedicated 66-kilometre metro network with a total of 31 stations from Rouse Hill through the City and to Bankstown. The Metro North West Line operator, Metro Trains Sydney, will be responsible for the operations and maintenance of the entire line.
The City and Southwest extension includes a 15km greenfield line with seven new stations plus the conversion of the existing suburban rail line to metro rail standards, covering a further 13km of track and 11 existing stations. The project also includes expansion of the current Sydney Metro Trains Facility at Rouse Hill and a new trains facility at Sydenham. Construction of the new line is currently underway with revenue service expected to start in 2024.
The Metropolis trains and digital signalling systems for the City & Southwest project will include the same design and features as the North West Line, designed to meet the specific needs of Sydney. According to the specifications, the new trains will meet strict sustainability criteria; a robust lightweight structure, low energy consumption, high levels of recoverability and recyclability, technical reliability and ease of maintenance. The trains will also be equipped with remote sensors for optimal maintenance planning.
Alstom has put sustainability and the passenger at the heart of its design process. The trains for Sydney will be built with the safety and comfort of passengers in mind, offering accessibility, wide doors and spaces to facilitate passenger flow, acoustic comfort, vibration mitigation and passenger information in real time.
Alstom’s metro trains are a world-leading, proven, safe and reliable train that serve many of the world’s great cities, including Paris, London, Amsterdam, Barcelona and Singapore. Alstom has more than 65 years’ experience in the production of metros, having sold over 17,000 metro cars that operate in 55 cities around the world and carry 30 million passengers every day.
Rouse Hill Station is on Sydney’s first metro line, Metro Northwest, which opened on 26 May, 2019. Services at the 13 metro stations operate every four minutes in the peak in each direction on Australia’s first driverless railway.
Alstom and Mumbai Metro Rail Corporation (MMRC) unveiled the life-sized mock-up of the trainset for Mumbai Metro Line 3 (Aqua Line). The new, iconic and exclusive design for Mumbai meets all technical and manufacturing parameters. The mock-up provides a glimpse of the advanced features that will make daily commute substantially easier for millions of citizens in the city.
Once operational, the Aqua Line will reduce vehicular congestion by offering a better alternative that will be fast, efficient and sustainable. Earlier, in August this year, the scale model of the rolling stock was unveiled by Devendra Fadnavis, Chief Minister of Maharashtra in presence of Ashwini Bhide, Managing Director of MMRC along with senior officials. At the same event, Line 3 was christened as Aqua Line, inspired by the vital flow of the sea which is an integral part of the city.
Speaking of this milestone, Alain Spohr, Managing Director, Alstom India and South Asia said, “Our objective was to create an appropriate, future-proofed design that is relevant to the people, the city and their expectations. This theme is called – Dynamic Fluidism. All technical and manufacturing parameters have been met in respect to the high interior density layout and space efficiency. We are proud to present this ‘New Face of Mumbai Transportation’. Alstom is committed to support MMRC in easing the transportation challenges of Mumbai. With the project stipulating more than 80% localized manufacturing, this contract further reinforces Alstom’s commitment to invest, grow and Make in India.”
The design takes inspiration from the positive energy of Mumbai and architecture of the city–which is an amalgamation of different styles from around the world. The theme captures evolution of the city’s architectural landscapes over the years.
The exterior theme is a tribute to the energy flowing through the city of Mumbai – the city that never sleeps. Inspired by the vital flow of water and aspiring to be a fast, efficient and sustainable mode of travel, to become the new lifeline for the people of Mumbai.
The interior colour harmony is inspired by the people of Mumbai–always on the move, who turn to the sea for peace and are soothed by its waves and breeze. This inspired the idea to use a unique blend of comfort (beige) and freshness (arctic green) to provide a relaxing and refreshing travel experience.
The trainsets for Aqua Line will be equipped with regenerative braking system aiding significant reduction in carbon emissions. The 177.2 meter-long trainsets will have higher capacity capable of ferrying around 3,000 passengers in one trip to accommodate high passenger flow.
Aqua Line trainset will have safety features that include CCTV cameras, smoke detectors, emergency intercoms, fire extinguishers with large detrainment doors to quickly evacuate passengers in an emergency. The trainsets have appropriate signages, three rows of grab rails, grab handles, poles for holding and dedicated space for passengers with luggage. The design also ensures easy accessibility and comfort for the differently abled, with dedicated space for wheelchair in every car.
MMRC awarded Alstom a contract worth €315 million to supply 31 lightweight, fully-furnished modern passenger trainsets of 8 cars each (total 248 metro cars) for Mumbai Metro Line 3 (Aqua Line) in September 2018. Along with rolling stock, Alstom will also execute the power supply contract and equip Line 3 with Urbalis 400, its latest generation of CBTC signalling technology. The scope of the signalling contract (worth €100 million) includes unattended train operation (UTO), computer-based interlocking and centralised train supervision, platform screen doors, as well as the electrical and mechanical supervisory control and data acquisition system (E&M SCADA).
The Aqua Line has 27 stations (26 under-ground & 1 at-grade), 33.5-km long underground stretch connecting the busiest and most congested regions in Mumbai – one of the fastest growing cities in India. The metro line will connect Cuffe Parade business district in the extreme south of the city to Santacruz Electronics Export Processing Zone in the north-central. The Aqua Line will be the first underground metro line in Mumbai and will be one of the longest underground continuous stretches in India.
Canopy by Hilton Madrid Castellana, first for Spain;
El Metropol Madrid, Curio Collection by Hilton, first for Madrid;
Atocha Hotel Madrid, Tapestry Collection by Hilton, first for Spain and first outside Americas
MADRID and MCLEAN, Va. – Hilton (NYSE: HLT) today announced the signing of three hotel franchise agreements with strategic investor partners, bringing three new brands to Madrid, of which two mark brand entries to the country. The addition of Canopy by Hilton Madrid Castellana; El Metropol Madrid, Curio Collection by Hilton; and Atocha Hotel Madrid, Tapestry Collection by Hilton represents a significant milestone for the global hospitality company, illustrating Hilton’s continued investment in Madrid as a premier tourist destination and its ambitions to further expand across Spain.
Patrick Fitzgibbon, senior vice president, development, EMEA, Hilton, said: “Spain has seen a surge in popularity, and Madrid is a particularly strong tourist market that has so much to offer. In 2018 the city welcomed a record-breaking 10 million visitors, making Madrid one of Europe’s most dynamic destinations for both business and leisure travellers. Responding to the increasing demand for great hotels combined with opportunities from world-class infrastructure investment and regeneration programmes, Hilton has expanded its portfolio to bring some of our most popular brands to Spain. Our new Madrid hotels will offer fantastic guest experiences and enrich communities.”
Canopy by Hilton Madrid Castellana
In partnership with Hotel Investment Partners (HIP), Hilton introduces its upper-upscale lifestyle brand, Canopy by Hilton, to Spain. HIP, Blackstone’s hotel investment platform, own the property and intend to invest €34 million in the hotel’s transformation, which will offer 311 guest rooms and multiple dining outlets, including a terrace restaurant overlooking Carlos Trias Bertran Square and a signature lobby café, Canopy Central. Expected to open in 2021, Canopy by Hilton Madrid Castellana is a perfect venue for guests looking to explore the capital. Situated close to the Paseo de la Castellana, one of the longest and widest avenues of Madrid, the hotel is near vibrant neighbourhood bars and restaurants, commercial buildings and international company headquarters, as well as Madrid’s world-famous Santiago Bernabéu Stadium, home of Real Madrid Football Club.
El Metropol Madrid, Curio Collection by Hilton
Joining a global portfolio of more than 70 one-of-a-kind hotels and resorts and located at the corner of Calle de la Montera and Gran Via, El Metropol Madrid, Curio Collection by Hilton is in the heart of Madrid’s historical town centre and close to the lively Puerta del Sol neighbourhood. With many rooms facing Gran Via, one of the city’s bustling streets with theatres, cinemas, shopping, restaurants and bars, guests can enjoy a stunning view of Madrid city life. Guests at the 93-room upper-upscale hotel will enjoy a range of facilities and amenities, including a rooftop bar with unbeatable city views. Its central location means many tourist attractions are within walking distance with easy access to Madrid’s metro network and connections to its business district. In partnership with owning company Montera 47, El Metropol Madrid is slated to make its debut in January 2021, joining existing Curio Collection hotels in Barcelona, Alicante, Malaga and Ibiza.
Atocha Hotel Madrid, Tapestry Collection by Hilton
Atocha Hotel Madrid, Tapestry Collection by Hilton joins a portfolio of hotels that offer guests unique style and an authentic connection to their destination. Brought to market by hotel operator Panoram Hotel Management, the 46-room hotel on Calle Atocha is just metres from Madrid Atocha railway station, the busiest in Spain, and is within walking distance of popular tourist attractions, including the Museo Reina Sofia, Prado Museum and the El Reitro Park. The first Tapestry Collection hotel to open in Spain and the brand’s first outside the Americas, Atocha Hotel Madrid will introduce the Tapestry Collection experience to Madrid locals and visitors alike. Amongst the amenities available, guests can select to stay in one of four Five Feet to Fitness rooms, a revolutionary in-room wellness concept created by Hilton allowing guests to work out in their guest room, with more than 11 pieces of fitness equipment and accessory options to choose from. The hotel is anticipated to open in the first quarter of 2020.
Hilton opened its first hotel in Madrid in 1953 and has since continued its commitment to investing in the city and supporting its growth as a leading tourist destination. Other Madrid properties include Hilton Madrid Airport (284 rooms), DoubleTree by Hilton Madrid Prado (61 rooms) and the 138-room Hampton by Hilton Madrid Alcobendas, located on Avenida de Fernando Alonso, which is set to open in January 2020.
Expansion on the Iberian Peninsula is a strategic focus for Hilton, and the company is growing faster in the region than ever before. It has signed a new Franchise or Management Agreement for a hotel in Spain every two months for the past two years, which represents more than 1,800 new keys. Hilton’s current Spanish portfolio of 12 hotels and resorts offers more than 2,000 hotel guest rooms and suites.
