Tag: Centre (Page 4 of 4)

Brand-New PC-12 NGX an Early Success at NBAA-BACE 2019

October 26, 2019 / WIL BALDWIN

A day after unveiling the new PC-12 NGX single-engine turboprop aircraft at the National Business Aviation Association’s annual Convention and Exhibition (NBAA-BACE), Pilatus reports very strong demand for the new aircraft across the global Authorised Pilatus Sales Centre network.

Based on the PC-12 airframe, of which more than 1,700 aircraft have been delivered, Pilatus introduces the third major evolution of the aircraft, named the PC-12 NGX. Markus Bucher, CEO of Pilatus, revealed the new aircraft at a ceremony on Monday evening. More than 200 guests were on hand for the aircraft’s public debut.

First customers of brand-new PC-12 NGX

On the first public day of NBAA-BACE, three customers were eager to be first in line to purchase the new advanced version of the PC-12.

Australian born Dion Weisler, President and CEO of HP, is the first owner to upgrade from his PC-12 NG to the new NGX. Dion Weisler said: “As an existing, proud and active owner-pilot of a 2017 PC-12 NG, I am amazed by the substantial innovation improvements in what I thought was an impossible aircraft to improve on. I am thrilled to be customer number one for the new PC-12 NGX. Pilatus has done it again – reimagined aviation and taken an already perfect aircraft and magically redefined perfection.”

The first US customer of the new PC-12 NGX is Shon Boney, Co-Founder of Sprouts Farmers Markets, an American supermarket chain. The new PC-12 NGX will actually be Shon Boney’s fourth PC-12.

João Carlos Marinho Lutz will be the first Brazilian customer to take delivery of the new PC-12 NGX. Currently flying a non-pressurised turboprop, he chose the new Pilatus aircraft, because “only the PC-12 NGX can reach farms in remote places where I need to go and amazing destinations in Brazil with comfort, speed and efficiency.”

The new PC-12 NGX is already certified

The PC-12 NGX features a completely new BMW Designworks interior, larger cabin windows inspired by the PC-24 and fully reclining executive seats. The new Pratt & Whitney Canada PT6 E-Series^TM engine comes with the Electronic Propeller and Engine Control. A fully integrated digital autothrottle and new avionics features by Honeywell, including a touch screen controller, emergency descent mode, tactile roll feedback and protection, and a low speed propeller quiet mode are just some of the features of the new cockpit environment.

The PC-12 NGX prototype first flew in December 2017. More than 600 hours of testing and certification flying were accumulated in Europe, USA and Canada as Pilatus quietly developed the new aircraft. The PC-12 NGX received certification just one week ago on Monday, 14 October 2019.

Pilatus will begin customer deliveries of the new PC-12 NGX early in the second quarter of 2020. The first production PC-12 NGX with serial number 2001 is present on the static display of Pilatus throughout the NBAA-BACE. Contact Pilatus or your nearest Authorised Pilatus Centre for aircraft availability.

First Royal Canadian Air Force C295 Shows Off its Final Livery

October 8, 2019 / WIL BALDWIN

Seville, 8 October 2019 – The first Airbus C295, purchased by the Government of Canada for the Royal Canadian Air Force’s (RCAF) Fixed Wing Search and Rescue Aircraft Replacement (FWSAR) programme, rolled out of the paint shop showing off its final livery at the Airbus facility in Seville, Spain. The aircraft will now go through the final preparation phase before its delivery to the customer, planned to take place in Spain before the end of the year.

The photo above shows the first Canadian C295, to be designated CC-295 by the RCAF, in its distinctive Search and Rescue colours.

The aircraft adopts the yellow paint scheme following the tradition defined in the 1970s for Search and Rescue aircraft, giving high visibility for those in the air and on the ground.

FWSAR program facts and figures

The contract, awarded in December 2016, includes 16 C295 aircraft and all In-Service Support elements including, training and engineering services, the construction of a new Training Centre in Comox, British Columbia, and maintenance and support services.

The aircraft will be based where search and rescue squadrons are currently located: Comox, British Columbia; Winnipeg, Manitoba; Trenton, Ontario; and Greenwood, Nova Scotia.

Considerable progress has been made since the FWSAR programme was announced two and a half years ago: the first aircraft is due to be delivered in Spain in the coming months; another six aircraft are either completing flight tests or in various stages of final assembly; and seven simulators and training devices are starting up preliminary acceptance tests.

The first RCAF crews started training in late summer 2019 at Airbus’ International Training Centre in Seville, Spain.

For more information about the FWSAR program click here

Alstom Digital Train Control System Enters Service on Wuppertal Suspension Railway

September 8, 2019 / WIL BALDWIN

A new version of Alstom’s Atlas ETCS train control system has entered service on the Wuppertal Suspension Railway (Wuppertaler Schwebebahn), located in western Germany. Following a contract signed with WSW mobil GmbH, Alstom equipped the entire suspended route, including 31 new vehicles and the century-old imperial wagon (Kaiserwagen), with ETCS, the European standard for train control systems.

The entry into service marks the completion of Alstom’s first full train control and signalling contract in Germany. It comprises line-side equipment, such as interlocking, radio block centre (RBC) and necessary line elements via train control systems, as well as an interface to the computer-aided operation control system.

The Wuppertal project represents the very first application of ERTMS Level 3 in which track occupancy is solely realised using train localisation performed by the ETCS equipment onboard the train. Alstom replaced the traditional trackside train detection systems such as axle counters with a digital signalling system whereby the ETCS-equipped vehicles communicate their positions directly to the central computer (or RBC) via radio.

“With the successful implementation of this project, Wuppertal is the first city in Germany to use the European train control system in urban transport. ETCS does not only provide for safer and more efficient train operation, but also serves as a basis for many future technologies,” says Jörg Nikutta, Managing Director of Alstom in Germany and Austria.

Alstom’s ETCS system Atlas was developed in Charleroi (Belgium), while the system components were produced at Alstom’s sites in Villeurbanne (France) and Bologna (Italy). The systems are installed and commissioned in Wuppertal by Alstom staff from Charleroi, Salzgitter and Berlin.

Alstom is market leader for ETCS on-board equipment. Since 2006, Alstom has equipped 8,200 vehicles (3,200 of which are already in operation) and for 18,000 kilometres of line (7,000 in operation) with ETCS equipment. A large part of DB’s ICE fleet has also been running with Alstom’s ETCS technologies on the high-speed line between Berlin and Munich since 2017.

Check out the video about the Wuppertaler Schwebebahn

Piaggio Aerospace awarded aircraft maintenance Contract

August 25, 2019 / WIL BALDWIN

The Italian manufacturer will provide ENAV – the Italian air navigation service provider – with the maintenance of the four P.180s used for flight inspection activities at national airports.

Piaggio Aerospace has been awarded a contract for the maintenance of the P.180s owned by ENAV, the company that manages civil air traffic in Italy. The agreement, with an estimated duration of approximately 7 years, is worth 12.6 million euro and will guarantee integrated logistic support for ENAV’s fleet of four P.180 Avanti II.

“The agreement signed represents a further step forward in the turn-around process of Piaggio Aerospace”, commented Vincenzo Nicastro, Extraordinary Commissioner of Piaggio Aerospace. “While strengthening the backlog of the Genoa factory-owned service centre, it also confirms the unique expertise of the company in the airframe MRO domain, consolidated throughout decades of activities”.

The ENAV P.180s perform an average of 1,800 flight hours per year. Thanks to their special equipment, they carry out regular measurements and calibration of airport navaids (Radar, VOR, DME, VDF, ILS etc.) in order to guarantee their continuous operational accuracy, essential for the safety of air navigation.

A similarly equipped P.180 will be showcased at MAKS ’19, the international air show that will be held at Zhukovsky International Airport (Moscow) from August 27 to September 1. A delegation of Piaggio Aerospace will also be present at the air show.

Saab Signs Contract to provide Belgium with a Combat Training Centre

August 19, 2019 / WIL BALDWIN

Saab has signed a supply contract with the Belgian MoD for the deliveries of training systems to the Belgian Army. The order value is approximately SEK 160 million and deliveries will take place in 2021.

The contract includes providing a complete training centre with infantry simulators, anti-tank simulators, vehicle systems and communication systems for controlling, monitoring and collecting training data to enable detailed analysis of exercises. The support contract will be negotiated separately later on.

One of the requirements was interoperability with NATO, and with Saab’s training system Belgium will be capable of participating in multinational exercises.

“This means Belgium will share the same standards as members in the Interoperability User Community (IUC). They can therefore take part in multinational exercises together with, among others, the Netherlands, Poland, Germany, Austria, Sweden, Norway, Finland, the UK and the US 7thArmy,” says Åsa Thegström, head of the business unit Training & Simulation within Saab’s business area Dynamics.

“The Belgian Army has used our training systems for the last four years and have clearly seen the benefits of realistic training. This order strengthens our position as one of the world’s leading suppliers of solutions for combat training,” says Henrik Vassallo, head of the country unit France & Benelux within Saab’s market area Europe.

The business unit Training & Simulation develops, manufactures and markets advanced military training equipment, such as laser simulator systems, instrumented training systems and target equipment. It also provides service and maintenance for delivered systems.

Viking Air To Attend CANSEC 2019 in Ottawa, Canada

May 23, 2019 / WIL BALDWIN

On May 29 and 30, Viking Air will exhibit at CANSEC 2019 at the EY Centre in Ottawa, Canada. Hosted by the Canadian Association of Defence and Security Industries (CADSI), CANSEC is Canada’s premier defence industry event, offering attendees the chance to explore the latest technologies and support services available for Naval, Air Force, Army, Civil Security, and joint-force military units.

Viking invites CADSI members and government personnel attending the show to visit us at Booth 521 to learn how Viking’s diverse range of exceptional utility and special missions aircraft suit a variety of operational profiles.

About Viking Air

Incorporated in 1970, Viking Air Limited began as the successor to McKinnon Enterprises, a parts and modification facility working on the Grumman family of aircraft. After specializing in flying boats for over a decade, Viking switched focus in 1983 when de Havilland Inc. selected Viking as their exclusive spare parts manufacturer and distributor for the de Havilland DHC-2 Mk I Beaver, Mk III Turbo Beaver, and DHC-3 Single Otter aircraft.

About CANSEC

For over 20 years, CANSEC has provided a platform for defence industry professionals from across the globe to connect and share innovative products and defence technologies with national and international military staff and major procurement officials. Held annually, the event is open to CADSI members and government personnel, and is the largest tri-service defence trade show in North America.

New Ground Transportation Centre Opens at Nashville Airport

April 5, 2019 / WIL BALDWIN

A brand new ground transportation centre has opened at Nashville International Airport. The new complex is part of the Metropolitan Nashville Airport Authority’s BNA Vision Project, a $1.2 billion expansion and renovation plan geared towards meeting the regions population growth and record-breaking passenger numbers.

The new facility came in under budget, and features a six-level, 2,200-space garage equipped with parking guidance and sensors that will direct drivers to open parking spots.

A covered walkway connects the parking garage to the terminal, and airport information displays are located at all five passenger elevators on the first level.

The first level of the garage has dedicated hubs for buses, limos, ride-sharing services, shuttles, and taxis.

JE Dunn Construction was the general contractor for the project, which includes car locating kiosks, electric-vehicle charging stations, and a fee-free tire-inflation unit.

Gulfstream To Showcase Aircraft At Aviation Africa 2019

February 20, 2019 / WIL BALDWIN

SAVANNAH, Ga., Feb. 20, 2019 /PRNewswire/ — Gulfstream Aerospace Corp. today announced it will showcase the clean-sheet, record-breaking Gulfstream G500 along with the class-leading, super-midsize Gulfstream G280 at the 2019 Aviation Africa Summit & Exhibition from Feb. 27-28 in Kigali, Rwanda. Gulfstream’s exhibition will be at the Radisson Blu Hotel & Convention Centre, and the aircraft will be on static display at Kigali International Airport.

“Gulfstream is committed to customers in sub-Saharan Africa and growing business aviation in the region,” said Mark Burns, president, Gulfstream. “Rwanda has made great investments in business aviation, and we are proud to support those efforts with our presence and static display in Kigali. Whether flying from country to country or intercontinentally, the G500 and G280 offer operators ideal options for this region.”

The award-winning G500 can fly 5,200 nautical miles/9,630 kilometers at its long-range cruise speed of Mach 0.85 and can easily connect Kigali to London at Mach 0.90 or Kigali to Singapore at Mach 0.87. When it entered service in September 2018, the G500 had already achieved 22 city-pair records around the world and currently holds a total of 32 city-pair records. The G500 that will be on display at Aviation Africa is in service with Qatar Airways’ Qatar Executive fleet.

The high-performing and agile G280 can fly 3,600 nm/6,667 km at Mach 0.80, and can travel nonstop from Kigali to Dubai, United Arab Emirates, at Mach 0.84 or Kigali to Bangalore, India, at Mach 0.80. The aircraft can easily access smaller airports, reach high altitudes quickly and offers excellent takeoff and landing performance.

NOTE TO EDITORS

Gulfstream Aerospace Corporation, a wholly owned subsidiary of General Dynamics (GD), designs, develops, manufactures, markets, services and supports the world’s most technologically advanced business-jet aircraft. Gulfstream has produced more than 2,800 aircraft for customers around the world since 1958. To meet the diverse transportation needs of the future, Gulfstream offers a comprehensive fleet of aircraft, comprising the Gulfstream G280^™, the Gulfstream G550^™, the Gulfstream G500^™, the Gulfstream G600^™, the Gulfstream G650^™and the Gulfstream G650ER^™. We invite you to visit our website for more information and photos at www.gulfstreamnews.com.

More information about General Dynamics is available at www.generaldynamics.com.

Dezeen’s top 10 skyscrapers of 2018

December 13, 2018 / WIL BALDWIN

In keeping with todays architecture theme, reporter India Block picks 10 of the year’s best skyscrapers for our review of 2018, from one sporting a 100-metre-high waterfall to the northernmost tower block in the world.

Towering 170 metres over Milan, the Generali Tower expresses Zaha Hadid Architects’ signature curves in a helical twist that runs through the tower.

No two floors are aligned inside the 44-storey skyscraper, hence the nickname “the twisted one”. Now the city’s third-tallest building, it stands together with Arata Isozaki’s 202-metre high Allianz Tower and the incomplete 175-metre tall PwC tower by Studio Libeskind on Milan’s former expo site.

Click the link below for the full story!

https://www.dezeen.com/2018/12/11/top-10-skyscrapers-2018/?utm_medium=email&utm_campaign=Daily%20Dezeen&utm_content=Daily%20Dezeen+CID_3d991e789379574a3e1c77cfd48c90eb&utm_source=Dezeen%20Mail&utm_term=Dezeens%20top%2010%20skyscrapers%20of%202018

Archives