MOSCOW (Reuters) – Low-cost airline Ryanair and other budget carriers are expected to start flying from Russia’s St Petersburg airport in 2020, the Russian Transport Ministry said.
The move is part of Russia’s plan to boost tourist flows to St Petersburg and will mean more competition for Russian air carriers, including national flag carrier Aeroflot.
The ministry said on Tuesday that Ryanair, EasyJet, WizzAir, Volotea, Air Baltic and Fly One had expressed interest in flights from St Petersburg’s Pulkovo airport, Russia’s fourth largest after Moscow’s three major hubs.
It said the companies had applied for flights from Pulkovo, coded LED by the International Air Transport Association, to 22 countries, including Britain, Germany and France.
Russia will introduce a so-called “Open Skies” regime for the companies for five years, the ministry said, allowing airlines to fly to St Petersburg without requiring the traditional bilateral inter-governmental agreements.
The move follows the introduction of a special electronic visa system for tourists visiting St Petersburg which nationals from 53 countries can take advantage of.
(Reporting by Gleb Stolyarov; Writing by Andrey Ostroukh,; Editing by Andrew Osborn and Ed Osmond)
Ireland’s Department of Defence has announced the acquisition of two Airbus C295 medium airlifters in a maritime surveillance configuration.
With this new order, the Irish Air Corps will become the 33rd C295 operator worldwide. Both aircraft will be equipped with the Fully Integrated Tactical System (FITS) and specific state-of-the-art mission sensors together with the recently announced Collins Aerospace Pro Line Fusion avionics.
Alberto Gutiérrez, Head of Military Aircraft at Airbus Defence and Space, said: “We are pleased to welcome the Irish Air Corps to our family of C295 operators, a signal of continued trust from an Air Force that already operates two Airbus CN235s.”
Melbourne, Florida, November 25, 2019 – Embraer Services & Support announces the expansion of its Executive Jets Service Center at Fort Lauderdale-Hollywood International Airport (KFLL). As of November 1, Embraer has expanded its service capacity through a lease agreement with Jetscape Services for a dedicated hangar.
“We are thrilled with the added capacity to better serve our customers, whether they are based in the region or just traveling through Florida,” said Frank Stevens, Vice President, Global MRO Centers, Embraer Services & Support. “Our expansion in South Florida allows us to further elevate the customer experience for aircraft owners and fleet operators alike, in addition to creating 40 new high-tech jobs for the community.”
Embraer’s presence in Florida is strategic to its Executive Jets customers throughout the Southern United States, the Caribbean and Central America as well as to those whose travel frequently brings them through South Florida.
“We are proud to offer Embraer the infrastructure for their customer support expansion in Florida,” said Troy Menken, Jetscape President. “Since 2002 we have served customers from around the world with aircraft of all sizes, and we are confident that our ground support expertise will ensure that Embraer customers will enjoy a premium experience.”
Embraer’s owned service center in South Florida is also the base for the Embraer Airworthiness Management program, where customers can meet with the team to learn how the program can be customized to deliver peace of mind and drive aircraft value retention. The program provides customers with a dedicated Certified Airworthiness Manager to plan, coordinate, and monitor all maintenance and airworthiness requirements throughout the aircraft’s lifecycle.
The Embraer Airworthiness Management program ensures the full regulatory compliance of aircraft maintenance and records through MyEmbraer.com, in addition to providing negotiation and dispute resolution services with suppliers to maximize cost savings for the customer. Smoother operations are a key benefit of the program’s advanced planning service, especially for customers with a tight operational schedule.
About Jetscape
Jetscape is a full-service, boutique fixed based operator (FBO) at Fort Lauderdale-Hollywood International Airport (KFLL). We provide a private terminal for general aviation traffic, aircraft fueling services, and aircraft storage facilities. Founded in 2002, Jetscape has over 17 years of demonstrated success in providing customer service, aircraft ground support, and property management.
Jetscape operates on more than 21+ acres at FLL with more than 100,000+ square feet of combined hangar space. We serve a broad spectrum of aircraft ranging from small single-engine piston aircraft to the world’s largest cargo carriers and we are the exclusive U.S. Military and Federal Government contractor at FLL.
Our mission is to create an unforgettable customer experience that is second to none. We aim to provide a bespoke, state-of-the-art gateway for business and tourism, to be an employer of choice, and a model of efficiency. We are excited to be your provider of aviation services, to support your business needs, and to share in your vision for customer and employee experience. We look forward to your arrival.
Railsystems RP GmbH orders two locomotives from Siemens Mobility
Sustainable concept: a combined diesel and electric locomotive
Delivery at the end of 2020
Railsystems RP GmbH has ordered two Vectron Dual Mode locomotives from Siemens Mobility, marking the first order for the new locomotive that can be operated either as a diesel or electric unit. Siemens Mobility first presented the concept at the InnoTrans 2018.
“With the Vectron Dual Mode, Railsystems RP GmbH is getting a locomotive that combines the best of two worlds: On electrified routes, the Vectron Dual Mode is powered by electricity to save fuel and reduce maintenance costs. On rail routes without overhead wires, the Vectron can shift to diesel operation without the operator having to change locomotives,” said Sabrina Soussan, CEO of Siemens Mobility.
The Vectron Dual Mode enables operators to increase value sustainably over their entire lifecycle. The locomotive can also operate through gaps in the electrified sections, eliminating the need to change locomotives. At the same time, conurbations and major cities, where there is often an electrified rail network, are spared emissions. The Vectron Dual Mode is specifically designed for freight service in Germany and is based on proven Vectron components. It operates on a 1,435 mm track gauge and weighs 90 tons. The locomotive is designed for the 15-kV-AC voltage system and is equipped with the PZB train control system. Regardless of whether it operates on electricity or diesel, traction power at the wheel rim is 2,000 kW. The locomotive’s diesel tank has a capacity of 2,600 liters. The Vectron Dual Mode has a top speed of 160 km/h.
Duluth, Minn. and Knoxville, Tenn. (30 October 2019) – Cirrus Aircraft, the global leader in personal aviation, ushered in a new era of innovation today with the introduction of Safe ReturnTM – a revolutionary emergency autoland system that enables passengers to land the Vision JetTM with just the touch of a single button. Once activated when available, Safe Return assumes control of the aircraft and transforms the Vision Jet into an autonomous vehicle that navigates to the nearest suitable airport for landing, communicates with air traffic control, lands and brings the aircraft safely to a complete stop. The Vision Jet, with both Safe Return and the award-winning Cirrus Airframe Parachute System® (CAPS®), provides a comprehensive, must-have total safety solution unique to G2 Vision Jet operators.
“Our mission is to make personal aviation more accessible by continuing to improve passenger comfort and safety,” said Zean Nielsen, Cirrus Aircraft Chief Executive Officer. “Safe Return delivers the next step towards autonomous flight, bringing a new level of confidence to the overall flying experience by providing the ultimate level of safety and control to passengers. Together, with the Cirrus Airframe Parachute System® (CAPS®), we have once again set a new standard for safety in personal air travel.”
Easily accessible by passengers in the Vision Jet cabin, Safe Return is activated by the touch of a button when available. Once pressed, the autonomous system analyzes terrain and datalink weather to determine the optimal airport for landing, and simultaneously begins communication with Air Traffic Control (ATC). Powered by the Perspective Touch+TM by Garmin® flight deck, Safe Return utilizes all available aircraft data streams, including available fuel, to safely navigate the Vision Jet to the identified airport and transition on to final approach for the appropriate runway based on ground winds. Autothrottle – launched earlier this year on the new G2 Vision Jet –and the automatic flight control system manage the aircraft’s speed, altitude and path, while the system automatically lowers the flaps and landing gear on final approach. Safe Return culminates in the aircraft making a fully autonomous landing on the intended runway and coming to a complete stop, allowing passengers to exit the aircraft.
Included during this entire process is constant communication with ATC – another layer of autonomy that provides assurance to passengers experiencing a critical situation. Upon activation, Safe Return immediately transmits an emergency message to ATC. Using text and speech technology, the system communicates the aircraft’s intentions over the appropriate ATC frequency, the 121.5 emergency voice frequency, and also switches to the universal emergency transponder code. ATC is automatically updated at regular intervals of the aircraft’s location, emergency situation and intended airport landing location. These communications begin the process of activating emergency services at the airport of intended landing to assist the passenger and pilot upon arrival. Safe Return can be easily disengaged by the pilot with a simple press of the Autopilot disconnect button on the yoke if a passenger inadvertently activates the system.
In 2016, Cirrus Aircraft ushered in a new era in personal transportation with the FAA certification of the world’s first single-engine Personal Jet – the Vision Jet. The turbine aircraft defined a new category in aviation – the Personal JetTM – with its spacious pilot and passenger-friendly cabin featuring panoramic windows, reclining seats, comfortable legroom for five adults and two children and the only turbine aircraft with a whole airframe parachute system as standard equipment. Earlier this year, Cirrus Aircraft unveiled and began delivery of the G2 Vision Jet, offering enhanced performance, comfort and safety with increased cruise altitude, speed and range, and a newly-upgraded Perspective Touch+TM by Garmin® flight deck. The company expects to begin delivery of Vision Jets equipped with Safe Return in early 2020.
Zurich, Switzerland, October 31st, 2019 – In ceremony held at its headquarters in Zurich, Switzerland, Helvetic Airways officially received its first E190-E2 jet from Embraer. The airline has a contract for a firm order of 12 jets of this model, and purchase rights for a further 12 E190-E2, with conversion rights to the E195-E2, bringing the total potential order up to 24 E-Jets E2s.
“As the only Swiss airline to operate Embraer aircraft, Helvetic Airways already stands out from the competition,” said Martyn Holmes, Vice President Europe, Russia & Central Asia, Embraer Commercial Aviation. “And, with our state-of-the-art E190-E2, it now has the perfect aircraft, in terms of environmental sustainability and to maximize the profitability of its flight operations.”
Helvetic Airways CEO Tobias Pogorevc is pleased to have achieved this milestone. “After more than eighteen intensive months,” he commented, “it’s a sense of accomplishment that we feel most today. With the E190-E2, Helvetic Airways is entering a truly new era. Our state-of-the-art twinjet will make us one of Embraer’s leading European operators. And it gives us just the modern and environmentally friendly aircraft we need to continue our development.”
This E190-E2 aircraft marks the start of Helvetic’s fleet renewal program. The purchase rights for a further 12 aircraft (E190-E2 or E195-E2) will enable Helvetic Airways to grow according to market opportunities. Helvetic Airways is configuring the E190-E2 in a single class layout with 110 seats and will deploy the aircraft on several domestic and international routes.
The E190-E2 is the first of three new aircraft types that make up the Embraer E2 family of aircraft, developed to succeed the first-generation E-Jets. Compared to the first-generation E190, the E190-E2 burns 17.3% less fuel and nearly 10% less than its direct competitor. This makes it the most efficient single-aisle aircraft on the market. The E190-E2 brings more flexibility with maximum range of up to 3,293 miles (5,300 km), about 621 miles (1,000 km) more than the first-generation E190.
The E190-E2 also generates significant savings for airlines in terms of maintenance costs. It has the longest maintenance intervals with 10,000 flight hours for basic checks and no calendar limit in typical E-Jets utilization. This means an additional 15 days of aircraft utilization over a period of ten years.
Pilots of the first-generation E-Jets require only two-and-a-half days of training without the need for a full flight simulator in order to fly the E2, which decreases the training burden and saves both time and money for the airlines. The E2 cockpit features advanced Honeywell Primus Epic 2 integrated avionics. Combined with the closed-loop fly-by-wire controls, the systems work together to improve aircraft performance, decrease pilot workload and enhance flight safety.
From the passenger’s perspective, the E2 cabin features a comfortable two-by-two layout. The absence of a middle seat enables passengers to have an enjoyable flight experience with more legroom and additional luggage storage space.
Embraer is the world’s leading manufacturer of commercial aircraft up to 150 seats with more than 100 customers across the world. For the E-Jets program alone, Embraer has logged more than 1,800 orders and 1,500 aircraft have been delivered. Today, E-Jets are flying in the fleets of 80 customers in 50 countries. The versatile 70 to 150-seat family is flying with low-cost airlines as well as with regional and mainline network carriers.
Saab and Vū Systems are launching a Next Generation Enhanced Flight Vision System (EFVS) solution using new passive millimetre wave (PMMW) technology, enabling pilots to see and land in low-visibility conditions at all times.
The Saab Vū EFVS enables commercial operators to maintain their schedule, while their competitors are forced to delay or cancel flights. It is the first system to provide reliable performance, unlocking access to airports in all weathers, without the need for conventional CATII/III infrastructure. The new Saab Vū EFVS provides the ability for take-off and landing in adverse weather conditions, including zero-visibility environments.
“The new system offers unmatched operational and safety advantages. Being able to take-off and land in low to zero-visibility environments radically reduces costs, increases safety and reduces environmental impact. This benefits pilots, operators and society as a whole. We are proud to be working together with Vū Systems to make this significant innovation commercially available,” says Jan Widerström, head of business unit Avionics Systems, within Saab business area IPS.
Every year, commercial aviation all over the world incurs massive financial losses as a result of delays and cancellations due to low visibility weather. In the USA alone, these additional costs amount to billions of dollars.*
To provide a solution to the impact of weather on U.S. flight operations, new FAA regulations (14 CFR 91.176) now permit landing without natural vision. The new regulations are performance based, meaning the performance of the EFVS sensor is critical to the operational value. The performance of the current EFVS sensors is limited by the atmospheric attenuation in the infrared band.
The Saab Vū EFVS solution is not affected by weather, enabling pilots to achieve Equivalent Visual Operations (EVO) and see runways at distances of two miles and more in zero-visibility conditions.
“This strategic arrangement with Saab means we can supply this revolutionary technology through a qualified supply chain to larger commercial customers, benefiting the aviation industry globally, by enabling them to take off and land when their competitors cannot,” says Stedman Stevens, CEO at Vū Systems.
Through a strategic partnership with Vū Systems, who developed the first commercially available PMMW sensor, Vū Cube, the Saab Vū EFVS exceeds the new regulatory performance goals. This unique solution comprises a new, sophisticated PMMW sensor and software that optimizes the sensor images with IR and synthetic vision, projected on the new Saab Head-Up Display (HUD). It provides pilots with the complete solution and the means necessary to land safely regardless of thick fog, snow, rain, smog, dust, smoke and clouds.
OLATHE, Kan.–(BUSINESS WIRE)– Garmin International, Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced certification of the G1000® NXi integrated flight deck upgrade for the King Air C90. With the G1000 NXi, aircraft owners and operators receive a wealth of new features, innovative capabilities and added utility all within a modern flight deck. King Air C90 owners and operators can easily upgrade from the G1000 to the G1000 NXi with minimal aircraft downtime and installation labor to receive a next-generation integrated flight deck.“As the popularity and demand of the G1000 NXi continues to grow, we’re excited to expand the availability of this upgrade to even more aircraft”
“As the popularity and demand of the G1000 NXi continues to grow, we’re excited to expand the availability of this upgrade to even more aircraft,” said Carl Wolf, vice president of aviation sales and marketing. “The G1000 NXi is an advanced flight deck that adds modern features including wireless connectivity, visual approach guidance, SurfaceWatch™, HSI map and more, all of which add tremendous value and advanced capability than ever before into existing King Air C90 aircraft.”
Flight Stream 510 and Connext® technology within the G1000 NXi integrated flight deck enables Database Concierge, the wireless transfer of aviation databases from the Garmin Pilot™ app on a mobile device to the G1000 NXi. Additional features include two-way flight plan transfer, the sharing of traffic1, weather1, GPS information, back-up attitude information and more, between the G1000 NXi and the Garmin Pilot, FltPlan Go and ForeFlight Mobile applications.
Visual approach guidance and map overlay within the horizontal situation indicator (HSI) further enhance the G1000 NXi feature set. Within the HSI map, pilots can overlay NEXRAD, Flight Information Service-Broadcast (FIS-B) weather, weather radar, SafeTaxi® airport diagrams, traffic, terrain and more. NEXRAD weather radar imagery can be overlaid on the moving map and animated on the multifunction display (MFD). Split-screen view is also available on the MFD, offering a simultaneous view of maps, charts, checklists, flight plans and more on a single screen. The addition of sectional charts and IFR low/high enroute charts give pilots convenient access to chart data on the flight display.
The G1000 NXi also supports the display of Automatic Dependent Surveillance-Broadcast (ADS-B) In traffic and subscription-free Flight Information Service-Broadcast (FIS-B) weather. The addition of SurfaceWatch runway monitoring technology provides visual and aural cues to help prevent pilots from taking off or landing on a taxiway, on a runway that is too short or on the wrong runway based on performance data entered during preflight. Visual and audible runway distance remaining annunciations are also available via SurfaceWatch within the G1000 NXi.
Modernized displays offer improved readability, while state-of-the-art processors provide smoother panning throughout the displays and faster map rendering within the G1000 NXi. Because the flight displays initialize in seconds, pilots have immediate access to frequencies, flight plan data and more, saving valuable time in the cockpit. The G1000 NXi integrated flight deck also incorporates contemporary animations and new LED back-lighting, offering increased display brightness and clarity, reduced power consumption, and improved dimming performance.
This upgrade adds to the growing portfolio of aircraft eligible for the G1000 NXi integrated flight deck upgrade, including the King Air 200/300/350, Daher TBM 850/900, Cessna Citation Mustang, the Piper PA-46 and soon, the Embraer Phenom 100. Aircraft owners and operators can easily upgrade to the G1000 NXi with little aircraft down time and disruption of the panel because the displays preserve the same footprint and connectors, so panel and wiring modifications are minimized. The G1000 NXi upgrade for the King Air C90 is available immediately through select Garmin dealers. The upgraded components of the G1000 NXi also come with a two-year warranty, which is supported by Garmin’s award-winning avionics product support team. For additional information regarding the G1000 NXi upgrade for the King Air, contact Scott Frye at 913-440-2412 or scott.frye@garmin.com.
Garmin’s aviation business segment is a leading provider of solutions to OEM, aftermarket, military and government customers. Garmin’s portfolio includes navigation, communication, flight control, hazard avoidance, an expansive suite of ADS-B solutions and other products and services that are known for innovation, reliability, and value. For more information about Garmin’s full line of avionics, go to www.garmin.com/aviation.
Oct 15 (Reuters) – United Airlines on Tuesday topped Wall Street estimates for quarterly profit, boosted by higher fares and lower fuel costs, and lifted its 2019 profit target despite the continued grounding of the Boeing 737 MAX.
Chicago-based United is one of three U.S. airlines that have each had to cancel more than 2,000 monthly flights through the end of the year as Boeing Co’s 737 MAX remains grounded following two deadly crashes in Indonesia and Ethiopia.
The flight cancellations have weighed on airline profits and costs, but strong travel demand, despite concerns of a global economic slowdown, continued to offset MAX headwinds and disruption in Hong Kong and China.
As a result, United raised its 2019 adjusted diluted earnings per share guidance to $11.25-$12.25 versus $10.50-$12.00 previously.
United shares, which closed up 1% at $87.88 before the earnings release, were about 1% higher in after-hours trading.
Total operating revenue rose 3.4% to $11.38 billion, underpinned by the airline’s three-year strategy to build up flight connections through its main U.S. hubs.
But closely watched unit costs excluding fuel and profit-sharing expenses, a concern for investors, rose 2.1%.
The airline, which is in talks with Boeing over 737 MAX compensation, did not provide any details on the estimated financial impact of the grounding.
Adjusted net income rose to $1.05 billion, or $4.07 per share, in the third quarter, from $834 million or $3.05 per share a year earlier.
Analysts on average had forecast $3.95 per share, according to IBES data from Refinitiv.
United management will host a conference call to discuss results on Wednesday at 10:30 a.m. EDT (1430 GMT).
Fellow U.S. MAX operators Southwest Airlines and American Airlines, which have both warned of a pretax profit hit from the MAX grounding, are due to report quarterly results next week.
United, Southwest and American are all scheduling without the MAX until early January.
(Reporting by Tracy Rucinski in Chicago and Sanjana Shivdas in Bengaluru Editing by Shinjini Ganguli and Matthew Lewis)
14 October 2019 – Alstom will present the first serial vehicle of its Aptis electric bus at Busworld 2019, being held in Brussels from 17 to 23 October. After the four prototypes that have been on the roads of many French and European cities for the past two years, this new design incorporates feedback from passengers and transport operators.
This first serial vehicle is based on an optimised global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers while still offering them more fluidity thanks to large sliding doors.
In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market.
“Alstom and its teams are very proud to be presenting the first series version of Aptis. This concentration of innovations perfectly represents what we always envisaged the production version of the 100% electric mobility solution would be. This clean, green bus, with its elegant design and optimised technical performance, will offer a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Benjamin Bailly, head of Alstom’s electric bus platform.
Aptis has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. Upcoming milestones include ongoing tests in Spain with the ground-based recharge solution SRS and the training of hundreds of drivers in a new driving experience ahead of the first traffic releases, scheduled for the end of the year in Strasbourg.
Manufacturing and testing of Aptis will be carried out at Alstom’s two sites in Alsace. The Hangenbieten site oversees manufacturing of the end modules (driver’s cab and rear lounge). Manufacturing of the central passenger module, final assembly and tests will be carried out at the Reichshoffen site. This scheme will allow serial production from the end of 2019 onwards. Five other Alstom sites in France contribute to the design and manufacture of Aptis: Saint-Ouen for system integration, Tarbes for traction, Ornans for engines, Villeurbanne for electronic components of the traction chain.
In order to complete Alstom’s vison of road electromobility, exhibited alongside Aptis at Busworld will also be SRS, a completely safe, ground-level, conductive, static recharge system allowing the charging of buses along their route or within depots. As a ground-based solution, it eliminates the need for overhead infrastructure in cities, preserving the aesthetics of the urban landscape. In depots, SRS avoids the infrastructure costs associated with overhead charging systems. SRS for e-buses is based on Alstom’s SRS static recharge technology for trams, a proven solution already in operation in Nice, France. It is developed at Alstom’s Vitrolles site.
