Tag: Systems (Page 5 of 15)

Alstom to Supply 19 Additional Metros for Line 11 of the Ile-de-France

July 11, 2021 / WIL BALDWIN

Alstom (OTC: ALSMY) will supply 19 five-car MP14 metros with driver’s cab for line 11 of the Île-de-France Mobilités network operated by RATP, for a total value of 132 million euro. This order, which is 100% funded by Île-de-France Mobilités, falls within the framework of the MP14 contract signed in March 2015 between RATP (mandated by Île-de-France Mobilités) and Alstom for the delivery of a maximum of 217 MP14 trains over 15 years, for a total amount of more than 2 billion euro. This contract is part of the Île-de-France Mobilités strategy for the modernisation of all rolling stock on the Île-de-France Mobilités network.

An initial tranche of the MP14 contract included 35 automated metros for line 14, consisting of eight cars each. A first conditional tranche for 20 additional automated metros, consisting of six cars each, was exercised in January 2017 for line 4. A second option of 20 additional five-car trains (with driver’s cabs) was exercised in February 2018 for line 11.

A state-of-the-art metro, MP14 offers an unprecedented level of comfort and safety thanks to its interior layout and seats with a design based on the theme of the alcove, creating both hospitality and privacy. Vast reception areas offer accessibility to all passengers, with dedicated areas and boomerang-shaped seats to improve the passenger flow and the capacity of the trains. MP14 also has LED lighting efficiently distributed throughout the entire metro to provide a sense of security while eliminating darkly shadowed areas. The supports and steadying points are compliant with safety standards and further increase comfort inside the train. Warm and cool ventilation helps to provide temperature balance, whatever the season. MP14 also provides comprehensive video protection and dynamic passenger information on board.

A special feature of the MP14 metros for line 11 is that the design of the driver’s cab incorporates feedback from previous generations of cabs. Their design features the latest developments in ergonomics and has been validated by RATP drivers and occupational physicians.

MP14 is designed to improve passenger comfort and experience as well as reconcile performance, energy savings and ease of maintenance to keep costs under control throughout its life cycle.

MP14’s 100% electrical braking system recuperates energy and re-injects it into the network as electricity, while limiting the emission of fine particles caused by the mechanical brakes. The system reduces the energy consumption of the metros, as well as air pollution, by up to 20%. MP14 is also 40% quieter than the metros currently in service on line 11, with a 95% recyclability rate.

About 20 automated metros for line 14, consisting of eight cars each, will be delivered by the end of 2021. The first six-car automated metros for line 4 are currently being tested. Production of the first five-car metros for line 11 began in the last quarter of 2020 and the first metro will begin validation tests on RATP tracks this summer.

Eight of Alstom’s sixteen sites in France are involved in this project:

Valenciennes, for the studies, integration, validation, and testing;
Le Creusot, for the bogies;
Ornans, for the engines;
Villeurbanne, for the on-board computerised systems;
Tarbes, for the traction;
Aix-en-Provence, for the safety IT;
Reichshoffen, for the collision studies, and
Saint-Ouen, for the design.

Mitsubishi Heavy Industries to Expand Metal 3D Printing Services

July 10, 2021 / WIL BALDWIN

Mitsubishi Heavy Industries Machine Tool Co., Ltd., a group company of Mitsubishi Heavy Industries, Ltd. (MHI) based in Ritto, Shiga Prefecture, will offer expanded services in metal 3D　printing services commencing on July 15, including prototype production and contract production by metal 3D (three-dimensional) printers applying laser-based Metal Additive Manufacturing (AM) technologies. In addition to its previously offered Directed Energy Deposition (DED) type metal 3D printers for large-scale parts, the Company will newly add services using binder jetting (BJT) metal 3D printers for small-scale parts. The expanded service lineup will enable manufacture of a full range of metal parts, from small components of 1mm size to ultra-large-scale parts exceeding 1 meter.

The addition to MHI Machine Tool’s lineup is the DMP2500 metal 3D printer developed by Digital Metal, a group company of Hogänäs of Sweden. The DMP2500’s BJT technology not only enables extremely precise manufacturing but also is engineered especially for high-volume production. Currently, MHI Machine Tool has provided metal printing services applying unique DED technology of “LAMDA” AM systems; now, with the introduction of a different type of printer, the Company can respond to a broad range of metal 3D print needs and propose and provide the optimal manufacturing method and equipment for each parts.

MHI Machine Tool concluded a contract with Digital Metal in July 2020 on marketing its DMP2500 and other metal 3D printers in Japan. By adding these BJT type systems to its own sales lineup, MHI Machine Tool will be in a position to offer a broad portfolio of not only sales but also after-sales services.

While metal 3D printers are receiving attention for their innovative advances to production processes, they also present challenges relating to the difficulty of their production and quality assurance, etc. With the new expansion of services, MHI Machine Tool will focus on providing solutions relating to additive manufacturing, including provision of related expertise, to accelerate early adaptation to production parts.

Going forward, MHI Machine Tool will develop its metal printing services structure spanning from small-scale high-precision to ultra-large-scale items, enabling the Company to respond to a broad wide-range of prototype production needs and contract production. In these ways, MHI Machine Tool will encourage manufacturers to expand into manufacturing parts using metal 3D printers and contribute to the industrial supply chain as a whole.

Boeing Awarded Contract to Deliver 14 Chinook Helicopters to the Royal Air Force

June 22, 2021 / WIL BALDWIN

U.S. Special Operations Command awarded Boeing [NYSE: BA] a $578 million Foreign Military Sales contract approved by the U.S. Department of State to deliver 14 extended-range Chinook helicopters to the UK Royal Air Force (RAF).

The extended range Chinook gives the RAF fleet more versatility to execute the domestic and international heavy-lift missions that only the Chinook can facilitate.

Boeing and the RAF recently celebrated the 40th anniversary of the first Chinook delivery to the UK. Boeing will also celebrate the 60th anniversary of the Chinook’s first flight later this year.

The United Kingdom will be the first international operator of a Block II Chinook. Deliveries are scheduled to start in 2026.

Boeing has more than 4,600 employees in Pennsylvania supporting the Chinook, the V-22 Osprey, the MH-139A Grey Wolf and a number of services and engineering efforts. Including suppliers and vendors, Boeing’s activities support an estimated 16,000 jobs in Pennsylvania.

The Chinook fleet for the UK Ministry of Defence (MOD) supports more than 450 highly skilled jobs across the UK. Boeing colleagues provide maintenance and services support at Gosport, MOD Boscombe Down, and are embedded alongside the military at RAF Odiham.

As a leading global aerospace company, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. As a top U.S. exporter, the company leverages the talents of a global supplier base to advance economic opportunity, sustainability and community impact. Boeing’s diverse team is committed to innovating for the future and living the company’s core values of safety, quality and integrity.

MAX-10 First Flight Takeoff Renton

Boeing Completes Successful First 737-10 Flight

June 19, 2021 / WIL BALDWIN

SEATTLE /PRNewswire/ — Boeing’s [NYSE: BA] 737-10, the largest airplane in the 737 MAX family, today completed a successful first flight. The airplane took off from Renton Field in Renton, Washington, at 10:07 a.m. and landed at 12:38 p.m. at Boeing Field in Seattle.

Today’s flight was the start of a comprehensive test program for the 737-10. Boeing will work closely with regulators to certify the airplane prior to its scheduled entry into service in 2023.

The 737-10 can carry up to 230 passengers. It also incorporates environmental improvements, cutting carbon emissions by 14 percent and reducing noise by 50 percent compared to today’s Next-Generation 737s.

MAX-10 First Flight Landing Boeing Field Seattle

Future Combat Air Program Tempest Poised to Drive Productivity Across United Kingdom

May 25, 2021 / WIL BALDWIN

The Tempest program is expected to generate long-term high value employment, with productivity per worker 78% higher than the national average, underlining how this exciting programme can make a significant contribution to the UK Government’s levelling up priorities and the wider economy.

The program is being delivered by Team Tempest – combining the expertise of the UK Ministry of Defence (MOD), BAE Systems, Leonardo UK, MBDA UK and Rolls-Royce. Working with international partners, the team is leading progress towards a UK-led internationally collaborative Future Combat Air System which will ensure the Royal Air Force and its allies retain world-leading, independent military capability.

Key to the success of Tempest is delivering this highly-advanced capability more rapidly and more cost effectively than ever before.

Investment by industry and MOD in research and development for Tempest will generate positive spill-over benefits for the wider economy through applications of new technologies in other sectors and driving innovation in collaboration with hundreds of companies, SMEs and academic organisations.

Click the link below to read the full story!

https://www.baesystems.com/en/article/the-economic-impact-of-the-tempest-programme

SMBC Aviation Capital Orders 14 Additional Boeing 737 MAX Jets

May 25, 2021 / WIL BALDWIN

SEATTLE, May 25, 2021 /PRNewswire/ — Boeing [NYSE: BA] and SMBC Aviation Capital today announced the lessor is positioning its portfolio for air traffic recovery by ordering 14 additional 737-8 jets, growing its 737 MAX portfolio. The new order comes as airlines prepare for a robust return to air travel and modernize their narrowbody fleets to reduce fuel use and carbon emissions.

The new purchase builds SMBC Aviation Capital’s 737 MAX portfolio to 121 jets, expanding their investment in Boeing’s single-aisle family. SMBC Aviation Capital also continues to incorporate new 737 MAX airplanes into the global fleet. In the first quarter of 2021, the lessor delivered 13 737-8s to customers, including 11 planes to Southwest Airlines in the U.S. and two planes to TUI in Europe.

The SMBC Aviation Capital purchase follows recent orders and commitments from Alaska Airlines, Southwest Airlines and United Airlines. The total number of gross orders and commitments for the 737 MAX this year now exceeds 250 airplanes.

A member of the 737 MAX family, the 737-8 is designed to offer more fuel efficiency, reliability and flexibility in the single-aisle market. The 737-8 can fly 3,550 nautical miles – about 600 miles farther than its predecessor – allowing airlines to offer new and more direct routes for passengers. Compared to the airplanes it replaces, the 737-8 also delivers superior efficiency, reducing fuel use and CO2 emissions by 16% and also reducing operating costs.

Aerial panorama on Baku

Silk Way West Airlines Orders Five Boeing 777 Freighters

April 28, 2021 / WIL BALDWIN

BAKU, Azerbaijan, April 28, 2021 /PRNewswire/ – Boeing [NYSE: BA] and Silk Way West Airlines today announced the private cargo operator will expand its international network with an order for five 777 Freighters. The deal marks the first purchase of the long-range, high capacity twin-engine freighter in the Caspian region and Central Asia. The airplanes will enable the airline to increase its capacity to meet growing cargo demand around the globe.

Silk Way West Airlines and Boeing leaders announced the agreement during a signing ceremony in Baku that included Akhundov; Rashad Nabiyev, Minister of Transport, Communications and High Technologies of Azerbaijan; and Earle D. Litzenberger, U.S. ambassador to Azerbaijan, as well as Stan Deal, president and CEO of Boeing Commercial Airplanes.

The 777 Freighter is the world’s largest, longest range and most capable twin-engine freighter. The airplane’s better fuel efficiency and ability to reduce CO₂ emissions by 17% compared to legacy airplanes will contribute to the carrier’s sustainability goals. With a range of 9,200 kilometers, the 777 Freighter can carry a maximum payload of 102,000 kilograms, allowing Silk Way West Airlines to make fewer stops and reduce landing fees on long-haul routes.

Designed to integrate smoothly with existing cargo operations, the 777 Freighter will provide Silk Way West Airlines operational flexibility with five 747-8 Freighters and seven 747-400 Freighters the carrier currently operates. The 747 and 777 freighters are capable of carrying tall and outsized cargo loads on 3-meter-tall pallets. This common main-deck pallet height capability enables interchangeable pallets. Additionally, the 777 Freighter main deck side cargo door is 3.72 meters wide, giving the freighter outsized carriage capability beyond tall payloads.

The 777 Freighter is Boeing’s top-selling freighter of all time. Customers from around the world have ordered 247 777 Freighters since the program began in 2005. The market leader in air cargo aircraft, Boeing provides more than 90% of the worldwide dedicated freighter capacity, including new production and converted aircraft.

Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As a top U.S. exporter, the company supports commercial and government customers in more than 150 countries and leverages the talents of a global supplier base. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.

Founded in 2012 in Baku, Silk Way West Airlines is the largest cargo airline in the Caspian Sea region with an annual cargo turnover of 350,000 tons. Based at Heydar Aliyev International Airport in Baku, the airline operates approximately 350 monthly scheduled flights to 40 destinations around the world.

Dubai Aerospace Enterprise Orders 15 Boeing 737 MAX Jets

April 20, 2021 / WIL BALDWIN

SEATTLE, April 20, 2021 /PRNewswire/ — Boeing [NYSE: BA] and Dubai Aerospace Enterprise (DAE) today announced the aircraft lessor is growing its 737 MAX portfolio with an order for 15 737-8 jets. DAE had been investing in the 737 MAX by buying jets from existing customers and leasing them back to the carriers. The new order is DAE’s first direct 737 MAX purchase from Boeing as it modernizes its portfolio for better economic and environmental performance.

The order will appear on Boeing’s Orders and Deliveries website once finalized.

Firoz Tarapore, Chief Executive Officer of DAE, said: “We are delighted to deepen our already strong relationship with Boeing. Including this order, we own and manage 162 Boeing aircraft. An increasing number of global aviation regulators are returning the MAX to the skies. We are confident in the success of these aircraft as domestic and regional air travel are seeing strong signs of recovery.”

The new purchase is DAE’s second investment in the 737 MAX in the past year. In the third quarter of 2020, the lessor signed an agreement with American Airlines to purchase and lease back 18 new 737-8 airplanes. Since the agreement, the lessor has delivered 17 of the jets to the U.S. carrier. DAE previously completed a similar purchase-leaseback deal with Brazilian carrier GOL for five 737-8s.

“DAE has been instrumental in helping its customers realize the operating economics and environmental performance of the 737-8. We are delighted that they have come back to add more 737 aircraft to its growth plan as it positions itself for the recovery in commercial passenger traffic,” said Ihssane Mounir, Boeing senior vice president of Commercial Sales and Marketing. “We are honored by DAE’s trust in the 737 family and we look forward to partnering with them to serve the fleet requirements of airlines around the world.”

The 737-8 is a member of the 737 MAX family which is designed to offer more fuel efficiency, reliability and flexibility in the single-aisle market. The airplane can fly 3,550 nautical miles – about 600 miles farther than its predecessor – allowing airlines to offer new and more direct routes for passengers. Compared to the airplanes it replaces, the 737-8 also delivers superior efficiency, using 16% less fuel and significantly reducing CO₂ emissions and operating costs.

Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As a top U.S. exporter, the company supports commercial and government customers in more than 150 countries, leveraging the talents of a global supplier base. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.

Dubai Aerospace Enterprise (DAE) Ltd. is a global aviation services company headquartered in Dubai. DAE serves over 170 airline customers in over 65 countries from its seven office locations in Dubai, Dublin, Amman, Singapore, Miami, New York and Seattle. DAE’s award-winning Aircraft Leasing division has an owned, managed, committed and mandated to manage fleet of approximately 425 Airbus, ATR and Boeing aircraft with a fleet value exceeding US$16 billion. DAE’s Engineering division serves customers in Europe, Middle East, Africa and South Asia from its state-of-the-art facility accommodating up to 15 wide and narrow body aircraft. It is authorized to work on 13 aircraft types and has regulatory approval from over 25 regulators globally. More information can be found on the company’s web site at www.dubaiaerospace.com.

Investment Firm 777 Partners Order 24 Boeing 737 MAX Airplanes

March 16, 2021 / WIL BALDWIN

Boeing [NYSE: BA] and private investment firm 777 Partners announced today an agreement to add 24 737-8s to the firm’s diverse aviation portfolio, with purchase rights for an additional 60 airplanes. The Miami-based company will place the single-aisle airplanes with its growing portfolio of low-cost carrier investments around the world.

In addition to aircraft leasing, 777 Partners strategically invests in a host of aviation businesses, from operating carriers to technology-driven solutions. The firm’s travel sector strategy is largely focused on innovative solutions for interlining, passenger connectivity, and creating new commerce channels for its airline investments and customers.

The 737-8 can fly 3,550 nautical miles, about 600 miles farther than its predecessor. This additional capability allows airlines to offer new and more direct routes for passengers. The 737-8 reduces fuel use and CO₂ emissions by 16% compared to the airplanes it replaces, and that superior fuel efficiency means lower operating costs and a smaller environmental footprint. Every airplane features the new Boeing Sky Interior, highlighted by modern sculpted sidewalls and window reveals, LED lighting that enhances the sense of spaciousness and larger pivoting overhead storage bins.

Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As a top U.S. exporter, the company supports commercial and government customers in more than 150 countries, leveraging the talents of a global supplier base. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.

777 Partners is a Miami-based private alternative investment firm that invests across a number of high growth attractive verticals. Founded in 2015, 777 Partners initially applied its expertise in underwriting and financing of esoteric assets to diversify across a broad spectrum of financial services businesses, asset originators and financial technology/service providers. In recent years, the firm has broadened its mandate and now invests across six different industries: insurance, consumer and commercial finance, litigation finance, direct lending, media and entertainment, and aviation.

Airbus, Fujitsu & Thales Team Up On British Army Future Communication Program

March 9, 2021 / WIL BALDWIN

London, 9 March 2021 – Airbus, Fujitsu and Thales UK have signed a memorandum of understanding (MOU) to work collaboratively on the upcoming Systems Integrator (SI) opportunity for the UK Ministry of Defence (MOD), Land Environment Tactical Communications and Information Systems programme – known as LE TacCIS.

Following the signature of the MOU, the partners have formed team ICELUS led by Airbus that will bring together a trusted collective of MOD strategic partners who have a unique breadth of expertise of defence communications networks. ICELUS will offer pioneering change through a coherent systems integration approach to ultimately deliver operational effectiveness and information advantage to the end user, whilst sustaining a UK centric, defence industrial base. The three partners will be able to jointly explore how their respective unique expertise and solutions can be combined in order to put forward the best-possible proposals with regard to capabilities and competitiveness for this major programme.

ICELUS will focus on the upcoming LE TacCIS System Integrator (SI) opportunity to lead on the design and integration of the products & services for applications, infrastructures and networks. The LE TacCIS System Integrator is expected to be contracted by 2023/2024.

The LE TacCIS programme consists of multiple sub-programmes and projects with the aim to deliver the next generation of tactical military communications in the land environment, providing the means to make informed and timely decisions enabled by agile Communication Information Systems (CIS).

LE TacCIS is designed to be resilient, working securely in a congested and contested cyber battlespace. It will degrade gracefully and recover when attacked, continuing to provide essential Command and Control (C2) services and capabilities. It will integrate with other systems to allow the quick and easy sharing of information between platforms and weapon systems, delivering full-spectrum, multi-domain effects.

In contrast to the current system’s single source prime supplier model, elements of the LE TacCIS programme will be competed from industry who will be incentivised to deliver increased system agility, capability and value for money.

Archives