Tag: test (Page 6 of 9)

Air-to-Air Refueling Broadens C295 Tactical Airlifter’s Operational Versatility

February 3, 2020 / WIL BALDWIN

The new capability for Airbus’ C295 to serve as an aerial tanker brings additional flexibility for this tactical airlifter, further increasing its already-proven versatility and opening additional mission opportunities.

Airbus Defence and Space developed a removable air-to-air refuelling (AAR) kit for the twin-engine aircraft that utilises a 100-ft.-long deployable hose with a “basket” at the end – enabling the transfer of fuel to receiver aircraft equipped with a probe. A remote vision system allows crewmembers aboard the C295 tanker to monitor refuelling operations from the cargo cabin.

Recent flights to test the kit involved an Airbus-owned C295 that refuelled a C295 from the Spanish Air Force, as well as proximity tests with the C295 and a fast fighter aircraft – a Spanish Air Force F-18.

“Customers are increasingly interested in purchasing not just an aircraft, but a versatile platform that can be used for different missions,” explained Martín Espinosa, the Airbus Defence and Space engineering technical manager responsible for the C295’s aerial refuelling test campaign. “The development of the air-to-air refuelling capabilities of the C295 forms part of this strategic vision.”

The C295’s aerial refuelling capability would be a highly valuable mission-extender for customers using C295s. These customers include the armed forces of current and future C295 operators responsible for civil and military search and rescue missions.

Additionally, it could serve as a cost-effective platform to train fighter pilots in the skills needed for air-to-air refuelling. “The C295 tanker kit could facilitate training of fighter pilots for missions involving refuelling, or even for AAR services on a lease-by-the-hour basis at a fraction of the cost of heavier aircraft,” explained Luis Díaz-Miguel, the Tactical Airlifters Marketing Manager.

Captain Gabiña, a Spanish Air Force pilot involved in the aerial refuelling tests, gave high marks to the C295 in its new role as tanker. “The degree of difficulty in flight test is always high since it involves performing manoeuvers that no one has done before. It should be noted that due to the positive behaviour of the aircraft, the operation has been good and straightforward,” he said.

Alstom at ElekBu 2020

January 29, 2020 / WIL BALDWIN

Alstom presents its improved Aptis e-bus at ElekBu

28 January 2020 – Alstom will present its Aptis electric bus at ElekBu 2020, being held in Berlin from 4 to 5 February. After extensive testing in many French and European cities for the past two years, the serial design of Alstom’s innovative 100% electric mobility solution incorporates feedback from passengers and transport operators. Following test drives in major German cities such as Berlin, Hamburg and Munich, the serial 12 meters Aptis e-bus is to be shown at a roadshow in Germany this year.

The serial vehicles are based on an optimized global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers, with a capacity of 100 persons, while still offering them more fluidity thanks to large sliding doors.

In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market. The high level of comfort is also reflected in the many very positive passenger surveys.

“Alstom is pleased to present the Aptis at ElekBu, which is so important for the German market. In the last two years, we have gained important experiences in trial operation. This 100% electric mobility solution offers a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Guillaume Legoupil, Sales Director Aptis.

Aptis is particularly popular in France, where it is also built. It has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. From February, the first series buses will be in regular service in Strasbourg.

New Boeing 777X Completes Successful First Flight

January 27, 2020 / WIL BALDWIN

Three hour, 51 minute flight marks new phase for rigorous test program
Largest and most fuel efficient twin-engine commercial jet expected to deliver in 2021

The new Boeing (NYSE: BA) 777X jetliner took to the skies today, entering the next phase of its rigorous test program. Based on the popular 777 and with proven technologies from the 787 Dreamliner, the 777X took off in front of thousands at Paine Field in Everett, Washington, at 10:09 a.m. local time for a three hour, 51 minute flight over Washington state before landing at Seattle’s Boeing Field.

“The 777X flew beautifully, and today’s testing was very productive,” said Capt. Van Chaney, 777/777X chief pilot for Boeing Test & Evaluation. “Thank you to all the teams who made today possible. I can’t wait to go fly your airplane again.”

Capt. Chaney and Boeing Chief Pilot Craig Bomben worked through a detailed test plan to exercise the airplane’s systems and structures while the test team in Seattle monitored the data in real time.

“Our Boeing team has taken the most successful twin-aisle jet of all time and made it even more efficient, more capable and more comfortable for all,” said Stan Deal, president and CEO of Boeing Commercial Airplanes. “Today’s safe first flight of the 777X is a tribute to the years of hard work and dedication from our teammates, our suppliers and our community partners in Washington state and across the globe.”

The first of four dedicated 777-9 flight test airplanes, WH001 will now undergo checks before resuming testing in the coming days. The test fleet, which began ground testing in Everett last year, will endure a comprehensive series of tests and conditions on the ground and in the air over the coming months to demonstrate the safety and reliability of the design.

The newest member of Boeing’s market-leading widebody family, the 777X will deliver 10 percent lower fuel use and emissions and 10 percent lower operating costs than the competition through advanced aerodynamics, the latest generation carbon-fiber composite wing and the most advanced commercial engine ever built, GE Aviation’s GE9X.

The new 777X also combines the best of the passenger-preferred 777 and 787 Dreamliner cabins with new innovations to deliver the flight experience of the future. Passengers will enjoy a wide, spacious cabin, large overhead bins that close easily for convenient access to their belongings, larger windows for a view from every seat, better cabin altitude and humidity, less noise and a smoother ride.

Boeing expects to deliver the first 777X in 2021. The program has won 340 orders and commitments from leading carriers around the world, including ANA, British Airways, Cathay Pacific Airways, Emirates, Etihad Airways, Lufthansa, Qatar Airways and Singapore Airlines. Since its launch in 2013, the 777X family has outsold the competition nearly 2 to 1.

About the Boeing 777X Family

The 777X includes the 777-8 and the 777-9, the newest members of Boeing’s market-leading widebody family.

Seat Count: 777-8: 384 passengers
(typical 2-class) 777-9: 426 passengers

Engine: GE9X, supplied by GE Aviation

Range: 777-8: 8,730 nautical miles (16,170 km)
777-9: 7,285 nautical miles (13,500 km)

Wingspan: Extended: 235 ft, 5 in. (71.8 m)
On ground: 212 ft, 8 in (64.8 m)

Length: 777-8: 229 ft (69.8 m)
777-9: 251 ft, 9 in (76.7 m)

For more information, please visit www.boeing.com/777X

Boeing Delays 777X First Test Flight Due to Bad Weather

January 22, 2020 / WIL BALDWIN

The folding wingtip of an unpainted 777X is pictured at Boeing’s facility in Everett

(Reuters) – Boeing Co <BA> said on Wednesday it was delaying 777X airplane’s first test flight, which was scheduled to take place on Thursday, due to bad weather.

Boeing said it was currently assessing the possibility of conducting the test flight on Friday.

(Reporting by Rama Venkat in Bengaluru and Tracy Rucinski in Chicago; Editing by Anil D’Silva)

China’s Bid to Challenge Boeing and Airbus Falters

January 9, 2020 / WIL BALDWIN

BEIJING/PARIS (Reuters) – Development of China’s C919 single-aisle plane, already at least five years behind schedule, is going slower than expected, a dozen people familiar with the programme told Reuters, as the state-owned Commercial Aircraft Corporation (COMAC) struggles with a range of technical issues that have severely restricted test flights.

Delays are common in complex aerospace programmes, but the especially slow progress is a potential embarrassment for China, which has invested heavily in its first serious attempt to break the hold of Boeing and Airbus on the global jet market.

The most recent problem came down to a mathematical error, according to four people with knowledge of the matter.

COMAC engineers miscalculated the forces that would be placed on the plane’s twin engines in flight – known in the industry as loads – and sent inaccurate data to the engine manufacturer, CFM International, four people familiar with the matter told Reuters. As a result, the engine and its housing may both have to be reinforced, the people said, most likely at COMAC’s expense – though another source denied any modification.That and other technical and structural glitches meant that by early December, after more than two and a half years of flight testing, COMAC had completed less than a fifth of the 4,200 hours in the air that it needs for final approval by the Civil Aviation Administration of China (CAAC), two people close to the project told Reuters.

Click the link for the full story!

https://finance.yahoo.com/news/china-bid-challenge-boeing-airbus-024459909.html

Boeing Rolls Out First Space Launch System Core Stage for Delivery to NASA

January 8, 2020 / WIL BALDWIN

Teams at Stennis Space Center prepare for core stage hot-fire testing ahead of Artemis I lunar mission

Boeing [NYSE: BA] today delivered the core stage of NASA’s first Space Launch System (SLS) deep space exploration rocket, moving it out of the NASA Michoud Assembly Facility in New Orleans to the agency’s Pegasus barge.

The event marks the first time a completed rocket stage has shipped out of Michoud since the end of the Apollo program. SLS Core Stage 1 is the largest single rocket stage ever built by NASA and its industry partners.

The rollout follows several weeks of final testing and check-outs after NASA’s declaration of “core stage complete” during a December 9 Artemis Day celebration at Michoud.

NASA will transport the SLS core stage to its Stennis Space Center in Bay St. Louis, Mississippi, in the next few days for “Green Run” hot-fire engine tests later this year. After inspection and refurbishing for launch, the stage moves to Kennedy Space Center in Florida. At Kennedy, the core stage will be integrated with the Interim Cryogenic Upper Stage (ICPS) and NASA’s Orion spacecraft for the uncrewed Artemis I mission around the moon – the first launch of a human-rated spacecraft to the Moon since Apollo 17 in 1972.

“The Boeing SLS team has worked shoulder-to-shoulder with NASA and our supplier partners to face multiple challenges with ingenuity and perseverance, while keeping safety and quality at the forefront,” said John Shannon, Boeing SLS vice president and program manager.

SLS is the world’s most powerful rocket, evolvable and built to carry astronauts and cargo farther and faster than any rocket in history. Its unmatched capabilities will deliver human-rated spacecraft, habitats and science missions to the moon, Mars and beyond as part of NASA’s Artemis program.

“We are applying what we’ve learned from development of the first core stage to accelerate work on core stages 2 and 3, already in production at Michoud, as well as the Exploration Upper Stage that will power NASA’s most ambitious Artemis missions,” said Shannon.

Space Launch System Core stage 1 rollout from Michoud Assembly Facility to NASA’s Pegasus barge; for Green Run test. MSF20-0002 Series. Leanne Caret_President and CEO of Boeing Defense, Space & Security.

Boeing Statement on 737 MAX Simulator Training

January 7, 2020 / WIL BALDWIN

Boeing is recommending 737 MAX simulator training in addition to computer based training for all MAX pilots prior to return to service of the 737 MAX. This recommendation takes into account our unstinting commitment to the safe return of service as well as changes to the airplane and test results. Final determination will be established by the regulators.

“Safety is Boeing’s top priority,” said interim Boeing CEO Greg Smith. “Public, customer and stakeholder confidence in the 737 MAX is critically important to us and with that focus Boeing has decided to recommend MAX simulator training combined with computer-based training for all pilots prior to returning the MAX safely to service.”

China’s Sixth Prototype C919 Jet Completes First Test Flight

December 27, 2019 / WIL BALDWIN

BEIJING (Reuters) – The sixth prototype of China’s home-built C919 narrowbody passenger plane completed its first test flight on Friday, marking a milestone in the programme’s testing schedule as China races to compete with Airbus SE and Boeing Co.

The sixth prototype is the last test plane its manufacturer, the Commercial Aircraft Corp of China Ltd (COMAC), has planned for the programme and was scheduled to fly before the year-end. Currently, there are five test planes that are conducting test flights elsewhere in the country.

The maiden flight on Friday from Shanghai lasted two hours and five minutes, COMAC said in a press release, adding that the jet will be conducting more test flights with a focus on cabin, lighting and external noises.

COMAC has already started production of aircraft parts which will be used for the first batch of aircraft deliveries, it said.

The state manufacturer is aiming to obtain Chinese certification for the C919 in 2021, but the date was subject to regulatory approval and the aircraft’s safety remains a top priority, according to COMAC officials.

He Dongfeng, the Communist Party boss of COMAC, wrote in a state-owned newspaper in December that aircraft safety is key to the survival of COMAC.

Designed to compete directly with the Airbus 320 and the Boeing 737 families in the market for jets with around 150 seats, the C919 is the speartip of China’s efforts to break a powerful decades-old Western duopoly.

The Boeing 737 MAX remains globally grounded following two fatal crashes that killed a total of 346 people.

(Reporting by Stella Qiu and Brenda Goh; Editing by Muralikumar Anantharaman)

Air Canada’s First Airbus A220-300 Takes to the Skies

December 15, 2019 / WIL BALDWIN

The first A220-300 for Air Canada has successfully completed its inaugural test flight from the Mirabel A220 final assembly line in Canada. The first of 45 aircraft for Air Canada is scheduled to be delivered to the Montreal-based airline in the coming weeks.

With its first A220 commercial flight in early 2020, Canada’s flag carrier will become the first airline in Canada to operate the Canadian-designed and -built A220. It will also become the first carrier in North America to fly the A220-300 variant.

Air Canada is planning to use the A220 on various domestic routes in Canada as well as to the United States. The A220’s unequalled performance and range capability will enable the airline to serve new markets, such as Montreal to Seattle and Toronto to San Jose, connecting the carrier’s main hubs to the West Coast, as of Spring 2020.

Benefitting from the latest technologies, the A220 is the quietest, cleanest and most eco-friendly aircraft in its category. Featuring a 50% reduced noise footprint compared to previous generation aircraft, 20% lower fuel burn per seat and 50% lower NOx emissions than industry standards, the A220 is a great aircraft for neighbourhood airports.

Around 100 A220s are currently flying with six operators on routes in Asia, America, Europe and Africa, proving the great versatility of Airbus’ latest family member.

Former Boeing Employee Who Warned of 737 Problems to Testify

December 9, 2019 / WIL BALDWIN

WASHINGTON, Dec 9 (Reuters) – A former Boeing Co employee who warned of problems with 737 production will testify on Wednesday at a U.S. House hearing on the Federal Aviation Administration review of the grounded 737 MAX.

The aircraft has been grounded since March after two fatal crashes in five months killed 346 people. Federal officials say the FAA is not expected to authorize the plane to fly until January at the earliest.

Former Boeing employee Edward Pierson, who had worked as a senior operations manager in the flight test and evaluation unit, will testify before the U.S. House Transportation and Infrastructure Committee, the panel said in a notice.

Pierson’s concerns were referenced at an Oct. 30 hearing — though he had not been named previously.

“All my internal warning bells are going off and for the first time in my life, I’m sorry to say that I’m hesitant about putting my family on a Boeing airplane,” Pierson wrote to Boeing management in mid-2018 before the first crash, according to an email obtained by the committee. He warned “the alternative of rushing to build is far riskier.”

Boeing spokesman Gordon Johndroe said Monday that “although Mr. Pierson did not provide specific information or detail about any particular defect or quality issue, Boeing took his concerns about 737 production disruption seriously.” He added that after Pierson retired and raised the issue again as recently as this year “those concerns received renewed scrutiny at the highest levels of the company.”

Johndroe added “the suggestion by Mr. Pierson of a link between his concerns and the recent MAX accidents is completely unfounded.”

Pierson could not immediately be reached on Monday.

Representative Albio Sires, a Democrat, on Oct. 30, questioned Boeing CEO Dennis Muilenburg about concerns raised by a Boeing employee about Boeing’s 737 production and his recommendation that production be halted. Sires said the employee wrote directly to Muilenburg in December 2018 after he had retired.

Johndroe confirmed Monday Pierson was the employee referenced by Sires.

“He raised some good concerns. We went back and took a look at his concerns and in some cases we identified areas where we thought his issues had already been addressed,” Muilenburg said at the hearing. Boeing did not slow production after Pierson’s concerns.

FAA Administrator Steve Dickson, FAA Aircraft Certification Service Executive Director Earl Lawrence and a member of the FAA’s Technical Advisory Board, Matt Kiefer, as well as former FAA employee G. Michael Collins will also testify.

(Reporting by David Shepardson; Editing by Dan Grebler and Lisa Shumaker)

Archives