Tag: Energy (Page 7 of 8)

Gulfstream Aerospace Expands Wisconsin Service Center

August 24, 2019 / WIL BALDWIN

Gulfstream’s expanded facility in Appleton, Wisconsin. The $40 million, 190,000 square-foot building can accommodate 12 Gulfstream G650ER aircraft and employs more than 100 people. (Gulfstream photo)

SAVANNAH, Ga., Aug. 23, 2019 /PRNewswire/ — Gulfstream Aerospace Corp. today announced it has officially expanded its maintenance, repair and overhaul (MRO) operations at Wisconsin’s Appleton International Airport with the opening of a newly built aircraft maintenance facility. The facility has been operational since Aug. 10.

The nearly 190,000 square-foot/17,652-square-meter building, northeast of the airport terminal, was constructed with an investment of approximately $40 million. The expansion to the Appleton service center includes 101,853 sq ft/9,462 sq m of hangar space, which will accommodate 12 Gulfstream G650ER or G650 aircraft. In addition to offices, back shops and general support space, the expansion adds a new sales and design center and increased customer access to Gulfstream’s design portfolio. The project, announced in February 2018, has resulted in nearly 100 new jobs at Gulfstream Appleton, with the potential for more in the next few years.

“This is a very exciting day for Appleton and the entire Fox Valley,” said Derek Zimmerman, president, Gulfstream Customer Support. “This beautiful facility represents the most significant expansion we’ve had in the 20 years we’ve been here. It is a tremendous asset to our site and the community. It will help us enhance the reliability of our growing fleet, support more customers and elevate their experience, continue to maintain a high level of safety and provide a world-class workplace for our employees.

“We are thankful to General Dynamics, the Wisconsin Economic Development Corporation, the Fox Cities Chamber of Commerce Regional Partnership, the Outagamie County Executive, the Outagamie County Board of Supervisors and the town of Greenville Board for their essential support.”

Gulfstream announced the maintenance facility opening before an audience of employees and state and local dignitaries, including Wisconsin Gov. Tony Evers. The company will open four other expanded or new service centers in 2019 and 2020: Savannah, Georgia; Van Nuys, California; Palm Beach, Florida; and Farnborough, England.

Gulfstream Appleton is home to a service center and a large-cabin completions facility spread over approximately 500,000 sq ft/46,452 sq m. It offers customers a broad range of services, including major inspections, structural modifications, major avionics installations and safety upgrades. Its MRO operation is certified by the U.S. Federal Aviation Administration, European Aviation Safety Agency, Civil Aviation Administration of China and seven other civil aviation authorities worldwide. In 2018, Appleton had nearly 500 aircraft visits.

Gulfstream Appleton’s new facility has several sustainable features, including sensitive land protection, rainwater management system, enhanced control systems for heating and cooling, optimized energy performance and electric vehicle charging stations. It is expected to receive U.S. Green Building Council Leadership in Energy and Environmental Design certification.

Embraer Advances Demonstrator Aircraft Electric Propulsion

August 18, 2019 / WIL BALDWIN

São José dos Campos-SP, August 16 2019 – Embraer unveiled today, on the eve of its 50th anniversary, images of the demonstrator aircraft with 100% electric propulsion technology, which is currently under development. The prototype has a special paint scheme and is ready to receive systems and components.

The aircraft’s electric motor and controller are being manufactured by WEG at the company’s headquarters in Jaraguá do Sul, Santa Catarina, Brazil, as part of the scientific and technological cooperation agreement for jointly development of electrification technologies.

Advances on the project include the partnership with Parker Aerospace that will be responsible to supply the cooling system for the demonstrator aircraft.

On the forthcoming months, the companies’ technical teams will continue to test the systems in the labs preparing the integration in the demonstrator aircraft for testing under real operating conditions. The first flight of the prototype is scheduled for 2020.

About the technological cooperation

The proposed scientific development program of aeronautical electrification, formalized through the cooperation between Embraer and WEG announced in May 2019, constitutes an effective and efficient instrument for experimentation and maturation of the technologies before they are applied in future products.

The partnership, in the context of pre-competitive research and development, seeks to accelerate the knowledge of the necessary technologies to increase the energy efficiency of an aircraft, considering the use and integration of electric motors into innovative propulsion systems. A small single-engine aircraft, based on the EMB-203 Ipanema, will be used as test bed, carrying out the initial evaluation of the electrification technology.

The electrification process is part of a series of efforts carried out by Embraer and the aeronautical industry aimed at ensuring the commitment with the environmental sustainability, as already done with biofuels to reduce carbon emissions.

By establishing strategic partnerships through more agile cooperation mechanisms, Embraer is stimulating knowledge networks to allow a significant increase in Brazil’s competitiveness and the construction of a sustainable future.

Alstom’s New-Generation Citadis Tram for Caen la Mer

July 29, 2019 / WIL BALDWIN

Alstom has commissioned its new-generation Citadis X05 tram on the three new lines of Caen la Mer. Presided over by Joël Bruneau, President of the Urban Community of Caen la Mer, and Rodolphe Thomas, First Vice-President of Caen la Mer, in charge of transport, travel and infrastructure, the inauguration took place in the presence of Jean-Léonce Dupont, President of Calvados region, Hervé Morin, President of Normandy region, Agnès Monfret, EU delegate, Stéphane Guyon, general Secretary of Calvados Prefecture and Emmanuel Bois, Sales Director for Alstom in France.

“Just one year after the first tram was presented at the La Rochelle site, it is with great pride that Alstom and its teams take part in this inauguration. Thanks to their reliability, availability and ease of maintenance, we have total confidence in the ability of the 26 Citadis trams to meet the growing mobility requirements of the inhabitants of the Urban Community of Caen la Mer,” says Jean-Baptiste Eyméoud, Senior Vice President France at Alstom.

33 metres long and featuring 6 double doors on each side, the Citadis X05 for Caen la Mer can carry more than 210 passengers. It has 6 extra-wide passenger information screens, large windows covering 45% of the vehicle and will offer USB charging sockets, a first in France. In addition, the Citadis X05 for the Urban Community of Caen la Mer can climb slopes with gradients of up to 8% and has standardised, proven and more accessible components. Last but not least, the tram demonstrates a particularly high level of performance in terms of environmental sustainability, thanks in particular to its 100% LED lighting and optimised air conditioning. It is particularly energy efficient and 95% recyclable.

Eight of Alstom’s 13 sites in France designed and manufactured the Citadis trams for the Urban Community of Caen la Mer: La Rochelle (design, assembly, validation, commercial entry into service and warranty), Ornans (engines), Le Creusot (bogies), Tarbes (traction modules), Valenciennes (interior layout), Villeurbanne (on-board computerised systems), Aix en Provence (tachymetry, for measuring travel speed) and Saint-Ouen (design).In total, more than 2,600 Citadis trams have been sold to more than 50 cities in 20 countries.

Alstom Delivers Last Jazz Train of the Trenitalia Contract

July 12, 2019 / WIL BALDWIN

Out of Alstom’s factory in Savigliano (CN) perfectly on time, the last “Jazz” train, the 136th for the Campania Region, will soon be in passenger service. To celebrate the end of the deliveries, Marco della Monica, Director of the Regional Passenger Division of Trenitalia Piemonte, Michele Viale, General Director of Alstom in Italy, Davide Viale, Site Managing Director of Alstom of Savigliano, who were joined by Jazz and Pop teams both of Alstom and Trenitalia.

“Jazz” is a successful project the one of with trains circulating in 11 Italian regions, from Trentino to Sicily, a fleet of 136 Alstom trains of the Coradia family, which will soon be joined by over 150 Coradia Stream “Pop”. They are the new single deck regional trains in Alstom’s Coradia family, part of the framework agreement signed in August 2016 with the Italian railway operator. The first three Pop, out of a total of 47 trains destined for Emilia Romagna, have already been in passenger service since 14 June. Deliveries of Pop will continue at a fast pace till 2020.

The “Jazz” and “Pop” trains are part of a plan to renew regional transport and are already revolutionizing commuter travel. The trains, are multiple electric units (EMU), can travel at a maximum speed of 160 km per hour and have an entrance to the carriages “flush” with the pavement, which facilitates the passenger climb. They meet environmental sustainability criteria and 95% Jazz and 97% POP are recyclable, which also guarantees 30% more energy savings than the previous generation. Many services on board: video surveillance system, internal screens visible from every point of the train for passenger’s information, sound system, braille messages, 220 V power sockets for mobile phones and laptops.

“Over the past 15 years, more than 400 regional trains have been designed, produced and put into commercial service by Alstom in Italy, including the 136 Jazz of which today we have completed the production. To these figures we will gradually add the 150 Pop: the first vehicles already in passenger service in the Emilia Romagna region last June. We are proud to support Trenitalia in the public transport rail revolution and to work for the Italian regions, for passengers, for citizens”, Michele Viale, General Manager of Alstom in Italy declared.

The “Jazz” and the “Pop” trains are designed and manufactured by Alstom in Italy. Project development, production and certification are managed by the Alstom site in Savigliano (CN), a center of excellence for regional trains, with the support of Sesto San Giovanni (MI) for traction systems and auxiliary converters, and Bologna for on-board train signaling systems.

Delta’s 50th U.S.-Made A321 Powered with Sustainable Jet Fuel

July 12, 2019 / WIL BALDWIN

Airbus has delivered Delta Air Lines’ 50th A320 Family jetliner produced in the U.S. manufacturing facility at Mobile, Alabama; this aircraft – an A321 – is shown during a pre-delivery test flight

Airbus has expanded its aircraft deliveries using sustainable jet fuel blends, with one of the latest involving the milestone 50th A320 Family jetliner provided to Delta Air Lines from Airbus’ production facility in Mobile, Alabama.

The landmark aircraft was an A321 – Airbus’ longest-fuselage version in its A320 product line – and the first of 20 for the U.S.-based airline whose delivery flights over the next year will operate with blends of sustainable jet fuel.

Sustainable-fuelled jetliner deliveries originated with Airbus

This continues the strong Airbus commitment to minimising air transportation’s environmental impact – which includes becoming the first aircraft manufacturer offering customers the option of receiving new jetliners with sustainable fuel in their tanks. Such delivery flights have been available since 2016, starting from the Airbus headquarters production facility in Toulouse, France.

Airbus offers this option as part of its strategy to promote a more regular use of sustainable fuels within the aviation industry. In the longer term, the company also envisions supporting industrial production of sustainable fuels for aviation in the southeastern U.S. – the broad geographical region in which the Mobile, Alabama production facility for A320 Family jetliners is located.

Delta Air Lines is the second U.S customer to have its aircraft delivered by Airbus from the Mobile final assembly line using sustainable fuel blends. The initial was JetBlue Airways, which received an A321 loaded with 15% sustainable jet fuel in September 2018.

The fuel for Delta Air Lines’ 50th A320 Family aircraft delivered from Mobile was supplied by Air BP and loaded into the jetliner by Signature Flight Support (Airbus’ fuelling services provider in Mobile). This fuel is certified compliant with the sustainability requirements of the European Union Renewable Energy Directive and the International Sustainability & Carbon Certification.

Alstom to Supply 32 Additional DT5 Metros for Hamburg

June 28, 2019 / WIL BALDWIN

28 June 2019 – Alstom, in consortium with Bombardier Transportation, will supply 32 further DT5 metro trains to Hamburger Hochbahn AG (Hochbahn) for a total amount of 186 million euros. Alstom’s share of the contract amounts to over 100 million euros. As part of this contract, Alstom will supply the mechanical part, the bogies and the mechanical braking system, while Bombardier will supply the electrical equipment, the driving system, the passenger information system and the vehicle control system. The trains will be assembled at Alstom’s site in Salzgitter, Lower Saxony. The new trains are to be put into service from January 2021 onwards.

“For many years now, our vehicles have been shaping mobility in Hamburg. This order confirms that customers and passengers are satisfied with our vehicles and will continue to rely on the DT5 trains in the future. With this order we will have delivered a total of 163 vehicles to Hamburg. This is a proof of our long-standing, trusting and sustainable cooperation with Hochbahn”, says Dr. Jörg Nikutta, Managing Director for Alstom in Germany and Austria.

The DT5 metro fleet has been in operation in Hamburg since autumn 2012. The Hochbahn has now ordered a total of 163 metro trains of this generation in order to cope with the increasing number of passengers in the city. In the past, Alstom had already delivered the DT2, DT3 and DT4 fleets – a total of 462 trains – to the Hamburg subway system.

Hamburg is the second largest city in Germany and the eighth largest city in the European Union. In order to meet the needs of such a large urban population, the DT5 was designed as a modern, spacious subway with wide corridors, a continuous interior and multi-purpose areas adapted to new passenger needs. Each of the 40 meter long three-car trains has 96 seats, 240 standing spaces and two additional wheelchair spaces. The DT5 also offers high passenger comfort, such as air conditioning, passenger information and monitoring systems as well as automatic door closing.

The DT5 subways are environmentally friendly. Their lightweight stainless steel car bodies and regenerative braking system contribute to improving energy efficiency. The vehicles are very quiet, which makes the Hamburg subway one of the quietest in the world.

As part of the Hamburg Senate’s bidding offensive, Hochbahn is expanding its range of services by an average of around five percent per year over the next three years. The new services include significantly tighter metro intervals and a massive expansion of the bus service with new express and area buses. The latest subway generation (DT5) is now to be increased by 32 vehicles and up to 163 vehicles at a later stage.

Boring Gets $49M Las Vegas Convention Center Contract

May 23, 2019 / WIL BALDWIN

LAS VEGAS (AP) — A company backed by tech billionaire Elon Musk has been awarded a nearly $49 million contract to build a transit system using self-driving vehicles underneath the Las Vegas Convention Center.

The board of directors of the Las Vegas Convention and Visitors Authority approved the contract Wednesday with The Boring Company, the Musk-backed enterprise based in Hawthorne, California.

People would be transported underground on self-driving electric vehicles from three types of Tesla Model X chassis. The system will be capable of transporting up to 16 people at time through parallel tunnels, each running in a single direction. The twin tunnel system will run less than a mile (1.6 kilometer) long.

The system also will include a pedestrian tunnel and three underground stations accessible from convention center’s halls.

The company plans to immediately pursue permits to start construction in September. It aims to debut the system by December 2020.

“The first thing that’s important is to get it right,” Authority President and CEO Steve Hill told the Las Vegas Review-Journal . “We want to do it as quickly as possible, but we want our customers to be comfortable with it.”

Las Vegas Mayor Carolyn Goodman cast the only vote against the project. At a meeting last week, she cited concerns about hiring a company that has yet to deliver a transit system.

The authority will reimburse the company as it completes certain stages of the project, like completing excavation for the first station and digging the first 100 feet (30.5 meters) of the first tunnel. Full payment is contingent on the company demonstrating that the system can support an average of 4,400 passengers per hour.

Construction will be able to proceed without disruption to traffic or other surface activity, Hill said. The system also could be expanded, which could be part of the solution to the city’s transportation problems, he said.

German Wind Turbine Maker Senvion Files for Insolvency

April 9, 2019 / WIL BALDWIN

FRANKFURT, April 9 (Reuters) – A German court on Tuesday approved an application for insolvency from wind turbine manufacturer Senvion, although the company said it was also continuing to look at new funding options and various potential investors had shown interest.

The Hamburg-based company, which has more than a billion euros of debt, said it had applied for preliminary self-administration proceedings because refinancing discussions with lenders had not yet been successful.

Shares in Senvion were down 40.5 percent at 1519 GMT, having fallen as much as 55 percent earlier in the day.

Senvion has faced delays and penalties related to big projects, while the wind industry as a whole has seen falling prices and increased competition as it moves away from governments guaranteeing generous fixed subsidised tariffs for power towards an auction-based system that favours the lowest bidders.

Market leaders Siemens Gamesa and Vestas have more pricing power, putting smaller suppliers under pressure.

Financial sources had told Reuters Senvion needed at least 100 million euros ($112 million) in the short term to keep operating.

“Lenders and major bond holders are currently continuing intensive discussions around a financing offer to secure the continuation of operations which may allow the company to successfully exit this process,” Senvion said in a statement.

Two financial sources said hedge funds Anchorage and Davidson Kempner were prepared to put up the 100 million euros in loans that CEO Yves Rannou – who took the helm in January – needs to continue restructuring and clear the backlog of orders that has recently cost the company revenues and profit.

The sources said majority shareholder Centerbridge was prepared to accept that but the banks – notably Deutsche Bank and BayernLB – would still need to agree. The banks have lent Senvion a total of 950 million euros.

BayernLB and Deutsche Bank declined to comment.

Senvion also has 400 million euros in bonds bought by hedge funds including Anchorage and Davidson Kempner.

Senvion said its management board would remain in office under the initiated procedure and business operations would carry on, with both existing service and maintenance contracts continuing.

The company said the preliminary self-administration proceedings affected Senvion GmbH and a subsidiary called Senvion Deutschland GmbH. It said Senvion S.A., Senvion Topco GmbH and Senvion Holding GmbH were expected to file for insolvency later this week.

Senvion’s website says it has around 4,000 employees globally.

(By Alexander Hübner and Michelle Martin, Additional reporting by Hans Seidenstuecker; Editing by Tom Sims and Mark Potter)

Nissan Recycles Old Leaf Batteries for Opus Camping Trailer

February 20, 2019 / WIL BALDWIN

The RV industry has seen an impressive resurgence in recent years. And while the electric vehicle scene is also booming, options that take both sectors into consideration are still rather thin. Nissan already has an all-electric mini-camper in its arsenal but today we’re getting a look at a new project coming down the line. Leaning on technology from its Leaf electric vehicle, Nissan is leveraging rechargeable energy on its ROAM battery pack, which will be paired with the forthcoming Opus concept camping trailer. Enough on-board energy to keep campers warm and fed for nearly a week makes this one of the more intriguing concepts we’ve seen in a while.

Click the link below for the full story!

https://9to5toys.com/2019/02/19/nissan-opus-camping-trailer/

Tesla To Buy Battery Tech Maker Maxwell Technologies

February 4, 2019 / WIL BALDWIN

(Reuters) – Tesla Inc has agreed to buy energy storage company Maxwell Technologies Inc for $218 million in an all-stock deal that could help the electric car maker produce batteries that hold more energy and last longer at a time when it needs to cut costs and faces growing competition.

Tesla is rapidly increasing production of its Model 3 sedan and needs to lower the price to reach a broader customer base than its pure luxury vehicles.

Maxwell executives told investors in January that it had developed and patented a “dry electrode” technology that could significantly increase the driving range and reduce the cost of electric vehicle batteries. In a presentation, Maxwell said it expected strategic alliances “within six months” centered around this technology.

The company also makes ultracapacitors, which discharge energy faster than batteries and are seen as complementing battery technology.

Ultracapacitors, combined with the energy of batteries, can enable rapid response times, function across a broader temperature range and lengthen battery life by up to two times, according to a blog post on Maxwell’s website.

Volvo-owner Geely Holding Group last May announced a deal with Maxwell and described the company’s ultracapacitor technology as helping to deliver “peak power” for hybrid cars.

“Tesla needs Maxwell’s solvent-free battery electrode manufacturing for a viable path to lower battery costs,” said Craig Irwin of Roth Capital Partners. “Real competitors are coming now, so Tesla needs to move fast.”

Maxwell’s customers also include General Motors and Lamborghini.

The offer values each Maxwell share at $4.75, representing a 55 percent premium to the stock’s closing price on Friday, the companies said. Maxwell shares rose to trade at $4.58.

Currently, Japan’s Panasonic Corp is the exclusive battery cell supplier for Tesla cars.

Tesla chief Elon Musk had highlighted the importance of ultracapacitors back in 2013.

“I’m a big fan of ultracapacitors. Was going to do my PhD at Stanford on them. But we need a breakthrough in energy density…,” Musk had tweeted https://twitter.com/elonmusk/status/336598500156518400?lang=en.

Tesla also sells power storage, often in conjunction with its solar power business, and ultracapacitors could be used in backup systems for homes and for utility power grids.

Maxwell expects the deal, which has already been approved by its board, to close in the second quarter of 2019, or shortly thereafter.

DLA Piper was Maxwell’s outside legal counsel, while Barclays Capital was the independent adviser. Wilson Sonsini Goodrich & Rosati represented Tesla as outside legal counsel.

(Reporting by Supantha Mukherjee, Peter Henderson and Akanksha Rana in Bengaluru and by Joe White and Paul Lienert in Detroit; Editing by Sriraj Kalluvila and Saumyadeb Chakrabarty)

Archives