The sports world was in mourning following news Sunday that Kobe Bryant, his daughter Gianna, and seven other people died died in a helicopter crash. Weather is believed to have been a contributing factor in the accident, as the conditions at the time were poor. The National Transportation Safety Board has sent a team of investigators to the site.
The helicopter reportedly departed John Wayne Airport in Orange County at 9:06 a.m. local time. The group was heading to the Mamba Sports Academy in Newbury Park. The Federal Aviation Administration reported that no flight plan had been filed. The Sikorsky S-76B helicopter was flying in low clouds and fog, and was operating under “special VFR” (special visual flight rules) status, requiring the pilot to be responsible for determining safe flying requirements in challenging weather conditions..
The helicopter crashed in foggy conditions on steep terrain in the mountains near Las Virgenes Road in Calabasas, California. The crash was reported to the Los Angeles County Fire Department. The crash set off a small brush fire in the area. Firefighters were able to contain the blaze, but were not able to find any survivors.
Kobe Bean Bryant, born 23 August 1978; died 26 January 2020
U.S. Federal Aviation Administration certifies update to the popular Garmin G5000 avionics suite
This leading-edge technology will be standard on new Learjet aircraft and available as a retrofit on in-service Learjet 70 and Learjet 75 aircraft
Upgrade brings enhanced capabilities to the renowned BombardierVision flight deck and paves the way for future advancements
Bombardier’s newest Learjet, the Learjet 75 Liberty, is getting strong interest on the market, boasting the smoothest ride and the most spacious cabin as well as the latest avionAs part of its continuing commitment to the legendary Learjet product line, Bombardier is pleased to announce that the U.S. Federal Aviation Administration (FAA) has certified the latest update to the popular Garmin G5000 avionics suite aboard Learjet aircraft.
As part of its continuing commitment to the legendary Learjet product line, Bombardier is pleased to announce that the U.S. Federal Aviation Administration (FAA) has certified the latest update to the popular Garmin G5000 avionics suite aboard Learjet aircraft.
The upgrade will be incorporated on new Learjet aircraft deliveries. In a few months’ time, the new Garmin G5000 avionics suite will also be a standard feature on Bombardier’s newest Learjet, the Learjet 75 Liberty, which is expected to enter service in mid-2020. A retrofit for in-service Learjet 70 and Learjet 75 aircraft will be available in early 2020.
“The latest Garmin G5000 avionics suite is one of many reasons to love Learjet,” said Peter Likoray, Senior Vice President, Worldwide Sales and Marketing, Bombardier Business Aircraft. “With a steady stream of acclaimed enhancements and the upcoming entry-into-service of the new Learjet 75 Liberty, Bombardier is making the world’s best light jet an irresistible choice for more operators than ever before.”
“The Learjet is an iconic symbol that is known for its performance and efficiency, and the ever-popular Garmin G5000 integrated flight deck further enhances this platform with modern features such as wireless connectivity, FANS 1/A+ and more*,” said Carl Wolf, Vice President, Aviation Sales and Marketing, Garmin. “We’re thrilled to work alongside Bombardier to deliver a state-of-the-art avionics suite with an advanced feature set that reduces pilot workload, improves situational awareness and gives pilots a superior in-flight experience.”
Bombardier’s recent enhancements to the beloved Learjet are popular with operators and include a standard pocket door for the quietest flight as well as extended maintenance intervals that drive down operating costs. The spacious new Learjet 75 Liberty, which further demonstrates Bombardier’s commitment to Learjet, is getting strong interest on the market. A full-size interior mock-up of this value-added business jet has already made several appearances to overwhelmingly positive reviews.
The new Garmin G5000 avionics suite will bring workload-reducing improvements, including climb, cruise and descent vertical navigation, enhanced take-off and landing performance calculations and much more. FANS 1/A+, which enables access to the most efficient and favourable routes, will be offered as an option. It will ensure readiness for modernized airspace requirements and deliver efficiency gains that are expected to lower direct operating costs. Pilots will also benefit from a vast array of wireless connectivity features, including two-way flight plan transfers between compatible apps and avionics, available thanks to Garmin’s Flight Stream 510 solution.
The Learjet 75 Liberty has the same operating costs as its competitors in the light jet category while offering the most spacious cabin, the fastest speed, the longest range and the smoothest ride. It is also a step up from other light jets in terms of safety standards, certified to the FAA’s more stringent Part 25 regulations, applicable to commercial airliners, unlike other light jets certified to Part 23 regulations.
The six-seat configuration aboard the Learjet 75 Liberty gives light jet passengers unprecedented freedom to stretch out. A standard pocket door between the cockpit and the Executive Suite delivers a quiet flight, while retractable side tables and stowable ottomans ensure productivity and comfort.
The Learjet 75 Liberty has a range of 2,080 nautical miles, able to connect Las Vegas to New York, Seattle to Washington, D.C., and Mexico City to San Francisco, nonstop.**
WASHINGTON (Reuters) – Boeing Co <BA> said on Friday it is addressing a new software issue discovered in Iowa last weekend during a technical review of the proposed update to the grounded Boeing 737 MAX, a development that could further delay the plane’s return to service.
“We are making necessary updates,” Boeing said in a statement. Officials at the planemaker said the issue relates to a software power-up monitoring function that verifies some system monitors are operating correctly.
One of the monitors was not being initiated correctly, officials said. The monitor check is prompted by a software command at airplane or system power up, and will set the appropriate indication if maintenance is required, company officials added.
The Federal Aviation Administration (FAA) did not immediately comment. ABC News reported the issue early Friday.
Boeing is halting production of the 737 MAX this month following the grounding in March of its best-selling plane after two fatal crashes in five months killed 346 people.
U.S. regulators are waiting for an update from Boeing on how they will resolve the issue. A U.S. official briefed on the matter said Friday the FAA is now unlikely to approve the plane’s return until March but it could take until April.
This week, American Airlines Group Inc <AAL> and Southwest Airlines Co <LUV> both said they would extend cancellations of MAX flights until early June.
Also this month, the FAA and Boeing said they were reviewing a wiring issue that could potentially cause a short circuit on the grounded 737 MAX. Officials said the review is looking at whether two bundles of wiring are too close together, which could lead to a short circuit and potentially result in a crash if pilots did not respond appropriately.
U.S. and European aviation safety regulators met with Boeing in an effort to complete a 737 MAX software documentation audit that was begun in November. Documentation requirements are central to certification for increasingly complex aircraft software, and can become a source of delays.
(Reporting by David Shepardson; Editing by Chris Reese and David Gregorio)
The H-47 Chinook offers the German Armed Forces a highly modern, proven and capable multi-mission helicopter
German industry will benefit from opportunities to work on the Chinook as well as opportunities across the Boeing enterprise
BERLIN, Germany, 14 January 2019 – Boeing [NYSA: BA] has submitted its response to the STH invitation to tender for Germany’s New Heavy Lift Helicopter program, also known as Schwerer Transporthubschrauber (STH). The response was submitted yesterday, 13 January.
The STH invitation to tender was issued on 24 June 2019 by the German procurement authority, specifically, the Federal Office of Equipment, Information Technology and In-Service Support of the Bundeswehr (BAAINBw). A contract award is expected in 2021 for the acquisition of 44 to 60 aircraft, including sustainment and training.
“We’re pleased to have submitted our response and look forward to working with the BAAINBw and German industry to bring the best value proposition to the German Bundeswehr,” said Michael Hostetter, vice president of Boeing Defense, Space & Security in Germany. “The H-47 Chinook is a one of a kind platform capable of performing missions that other helicopters cannot. It is a proven multi-mission heavy lift helicopter with advanced technology that meets the German requirements.”
Today, there are more than 950 Chinook aircraft operating in 20 countries, including eight NATO member countries (the Netherlands, Italy, Greece, Spain, Turkey, UK, Canada, and the United States). The Chinook will provide immediate interoperability to Germany while meeting a wide range of mission needs. As the world’s most proven heavy lift helicopter, the Chinook has a track record of on-time delivery and first time quality, with the lowest operating and acquisition costs and a technology roadmap that will keep it relevant for decades to come.
“We are committed to having the sustainment and training as well as parts of the production done in Germany,” said Dr. Michael Haidinger, president of Boeing Germany. “We will continue to build on and expand our Germany Industry Team for the H-47 Chinook Schwerer Transporthubschrauber competition. In addition, we are committed to bringing high end engineering and production opportunities from across the Boeing enterprise to German industry.”
GTN 650Xi & GTN 750Xi modernize cockpit navigation and are available immediately
OLATHE, Kan.–(BUSINESS WIRE)– Garmin International, Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced the GTN™ 650Xi and GTN 750Xi, the next generation of in-flight navigation technology. Designed as a direct slide-in upgrade to the previous generation GTN 650/750, pilots can preserve their panel and modernize the cockpit with the new GTN 650Xi and GTN 750Xi. The all-in-one GPS/NAV/COMM boasts a feature-rich multifunction display and can integrate with new or existing remote-mount equipment such as a transponder or audio panel. Dual-core processors and modern hardware also prepare the GTN Xi series for advanced capabilities in the future. The GTN 650Xi and GTN 750Xi have received Federal Aviation Administration (FAA) approval and are available immediately for fixed-wing single-engine and multi-engine piston, turbine and experimental aircraft, with helicopter and business aircraft approvals soon to follow.
GTN 750Xi and GTN 650Xi in the panel of a Bonanza (Photo: Business Wire)
“After decades of innovation and pioneering the GPS/NAV/COMM, we’re excited to bring the fourth generation GTN 650Xi and GTN 750Xi to the market,” said Carl Wolf, vice president of aviation sales and marketing. “Garmin was the first to introduce the all-in-one navigator with the iconic GNS 430/530. Over time the GNS WAAS and the industry-first GTN 650/750 touchscreen navigators were added to the line-up along with state-of-the-art features such as voice control, wireless connectivity and more. As the leader in GPS cockpit navigation, we have brought the most widely adopted navigators to the industry and with the GTN 650Xi and GTN 750Xi, we’re excited to add one more to the family.”
Modern processing power and state-of-the-art hardware within the GTN 650Xi/750Xi supports faster map rendering and smoother panning throughout the touchscreen navigator. It boasts a large, ultra-high-resolution display and wide viewing angle that offers superior readability in the cockpit. The displays initialize within seconds of start-up, providing immediate access to frequencies and flight plan information, saving valuable time in the aircraft. Preserving the same form factor as the previous generation GTN 650/750, the 6-inch-tall GTN 750Xi and the 2.65-inch-tall GTN 650Xi offer an intuitive touchscreen design with a dedicated direct-to button and dual concentric knob that provide added convenience when interfacing with the display.
Retaining all the features of the GTN 650/750, the GTN Xi series adds a vibrant display and vivid colors that enhance the contemporary look of the new navigators. When installed alongside a G500 TXi or G600 TXi flight display, the GTN Xi series brings a new level of modernization to the cockpit. Highly complementary, the GTN Xi and the TXi flight displays share similarities in display, appearance and hardware qualities. For example, both products feature an angular bezel so the pilot has a near-seamless experience when transitioning between the touchscreen flight display and the navigator.
The GTN 650Xi/750Xi offer advanced navigation functions, including ILS and LPV instrument approach procedures, as well as visual approach guidance. Based on a published glide path angle or a three-degree glideslope from the threshold of the runway, visual approaches also take into account terrain and obstacle clearance to assist pilots in flying a stabilized approach to the runway in visual flight conditions. Approach types that incorporate radius-to-fix (RF) leg types are also supported by the GTN Xi series. Additional capabilities include the option to add a published or custom holding procedure, vertical navigation (VNAV), graphical flight plan editing on the moving map and more.
The colorful, multifunction display-like map allows pilots to better visualize their dynamic position relative to potential hazards, such as terrain, weather and traffic. Geo-referenced instrument approach procedures can be overlaid on the map page, offering superior situational awareness when transitioning from the enroute to approach phase of flight. Terrain alerting is included within the GTN Xi series and further enhances situational awareness by using its internal terrain and obstacle database to provide audible and visual terrain proximity alerts, including, “terrain ahead, pull up” and “obstacle ahead, pull up.” Helicopter Terrain Awareness and Warning System (HTAWS), TAWS-A and TAWS-B are available as options.
Superior integration with an array of avionics on the market make the GTN 650Xi/750Xi a simple and straightforward solution to incorporate into any cockpit. Options for remote audio panel or transponder display and control allow aircraft owners to simplify their panel. When paired with a Garmin autopilot, such as the GFC™ 500 or GFC 600, pilots can fly fully coupled VNAV profiles and instrument approach procedures. Pilot workload-reducing features such as Telligence™ voice control are also available within the GTN Xi when paired with the optional GMA™ 35c. When paired with a GSR 56 Iridium datalink, global text and voice calling can be completed through the touchscreen display on the navigator.
Wireless connectivity is available with the optional Flight Stream 510, allowing pilots to connect their mobile devices running the Garmin Pilot™ and FltPlan Go applications to the GTN 650Xi/750Xi. When connected to the navigator, pilots can save time in the cockpit by wirelessly transferring aviation databases and flight plans from their mobile device to the navigator. Flight Stream 510 also supports the sharing of traffic, weather, GPS position information and more. The GTN Xi series is also compatible with the cost-effective Garmin navigation database.
The GTN 650Xi and GTN 750Xi have received FAA Supplemental Type Certification (STC) and are available immediately through Garmin Authorized Dealers for a suggested retail price of $12,495 and $17,995 respectively. A free GTN Xi trainer app is also available for download on Apple mobile devices, which allows customers to experience the feature set of these navigators. A new GTN Essentials 2.0 eLearning Course provides instruction on best practices for operational use of the new GTN Xi series and can be accessed via this website: https://buy.garmin.com/en-US/US/p/712644. The GTN Xi series come with a two-year warranty and are supported by Garmin’s award-winning aviation support team, which provides 24/7 worldwide technical and warranty support. Garmin was awarded top honors last year in avionics product support for the 16th straight year by Aviation International News,and earned the top spot in the annual avionics product support survey conducted by Professional Pilot magazinethis year, also for the 16th consecutive year.
An Allegiant Air MD-83 passenger jet takes off from the Monterey airport
WASHINGTON (Reuters) – The U.S. Federal Aviation Administration (FAA) needs to improve its oversight to address maintenance issues at Allegiant Air, the 11th largest U.S. carrier, according to a report seen by Reuters on Tuesday.
The U.S. Transportation Department’s Inspector General, in a 31-page report sent to Capitol Hill on Tuesday but not yet made public, said FAA inspectors since 2011 have not “consistently documented risks associated with 36 Allegiant Air in-flight engine shutdowns for its MD-80 fleet or correctly assessed the root cause of maintenance issues.”
Ultra-low cost Allegiant, a unit of Allegiant Travel Co, said it had not yet see the report and did not have an immediate comment.
The FAA said in a letter attached to the report that it agreed with eight of the nine recommendations made by the inspector general and partially agreed with the remaining one.
Allegiant carried about 14 million passengers last year, serving 122 U.S. cities and Puerto Rico on 450 flight routes.
The inspector general opened the probe in May 2018 after a “series of in-flight engine shutdowns, aborted takeoffs, and unscheduled landings” raised concerns about maintenance practices.
The report said in-flight shutdowns at Allegiant “continued until July 2018 and were only resolved four months later when Allegiant Air retired the last of its MD-80 fleet.” Allegiant now flies an all Airbus fleet.
The report found in-flight engine shutdowns forced 21 Allegiant aircraft to return or divert to other airports between 2014 and 2018, but that regulators did not properly track engine shutdown risks.
A 2015 maintenance provider failure at Allegiant Air demonstrated “severe violations that represent unacceptable safety risks or could result in catastrophic outcomes should also warrant a more stringent oversight approach,” the report said.
The inspector general said the airline’s maintenance provider failed to insert a cotter pin on a critical flight control component that put some 30,000 passengers at risk.
The report said in August 2015, a pilot “almost lost control of this aircraft during takeoff when it unexpectedly tried to lift off prematurely” but was able to abort takeoff and land safely.
After inspectors proposed a 30-day suspension for Allegiant Air’s maintenance provider, FAA regional officials reduced the suspension to a compliance action. FAA inspectors closed out six of eight compliance actions before ensuring Allegiant Air actually took any corrective actions, the report found.
It also found that FAA does not provide inspectors with guidance and comprehensive training to ensure Allegiant Air takes appropriate corrective actions.
The FAA said it had “initiated compliance actions at Allegiant Air that have improved safety for the flying public.”
(Reporting by David Shepardson; Editing by Richard Chang and Bill Berkrot)
Airline passengers walk next to an Allegiant Air commercial flight near an air traffic control tower operated by Serco nc. at the Ogden-Hinckley Airport in Ogden
JetBlue Founder David Neeleman Selects Salt Lake City as Headquarters for New Airline
America’s newest and perhaps most innovative airline does not yet have a name, or any airplanes. But it now has a headquarters.
David Neeleman’s startup will be based in Salt Lake City, where it plans to spend a capital investment of $3.2 million and create nearly 400 jobs over the next five years, according to local authorities. In return, the state offered tax rebates worth as much as about $1.1 million over five years.
“There’s a super strong technology base, and lower cost of living than California and some of the coastal areas,” Lukas Johnson, the airline’s chief commericial said in an interview. “We want to focus more on the technology aspect of the transportation side, and it makes a lot of sense. The tech sector is booming out here.”
WASHINGTON, Dec 9 (Reuters) – A former Boeing Co employee who warned of problems with 737 production will testify on Wednesday at a U.S. House hearing on the Federal Aviation Administration review of the grounded 737 MAX.
The aircraft has been grounded since March after two fatal crashes in five months killed 346 people. Federal officials say the FAA is not expected to authorize the plane to fly until January at the earliest.
Former Boeing employee Edward Pierson, who had worked as a senior operations manager in the flight test and evaluation unit, will testify before the U.S. House Transportation and Infrastructure Committee, the panel said in a notice.
Pierson’s concerns were referenced at an Oct. 30 hearing — though he had not been named previously.
“All my internal warning bells are going off and for the first time in my life, I’m sorry to say that I’m hesitant about putting my family on a Boeing airplane,” Pierson wrote to Boeing management in mid-2018 before the first crash, according to an email obtained by the committee. He warned “the alternative of rushing to build is far riskier.”
Boeing spokesman Gordon Johndroe said Monday that “although Mr. Pierson did not provide specific information or detail about any particular defect or quality issue, Boeing took his concerns about 737 production disruption seriously.” He added that after Pierson retired and raised the issue again as recently as this year “those concerns received renewed scrutiny at the highest levels of the company.”
Johndroe added “the suggestion by Mr. Pierson of a link between his concerns and the recent MAX accidents is completely unfounded.”
Pierson could not immediately be reached on Monday.
Representative Albio Sires, a Democrat, on Oct. 30, questioned Boeing CEO Dennis Muilenburg about concerns raised by a Boeing employee about Boeing’s 737 production and his recommendation that production be halted. Sires said the employee wrote directly to Muilenburg in December 2018 after he had retired.
Johndroe confirmed Monday Pierson was the employee referenced by Sires.
“He raised some good concerns. We went back and took a look at his concerns and in some cases we identified areas where we thought his issues had already been addressed,” Muilenburg said at the hearing. Boeing did not slow production after Pierson’s concerns.
FAA Administrator Steve Dickson, FAA Aircraft Certification Service Executive Director Earl Lawrence and a member of the FAA’s Technical Advisory Board, Matt Kiefer, as well as former FAA employee G. Michael Collins will also testify.
(Reporting by David Shepardson; Editing by Dan Grebler and Lisa Shumaker)
Union Pacific(NYSE: UNP) is suing the city of Palestine, Texas, to nullify a 150-year-old contract to keep a certain number of jobs in the town indefinitely.
The agreement between Union Pacific and Palestine — which was signed in 1872 — dates back to the days when the city was at the crossroads of several railroad companies that promised to keep jobs there indefinitely, according to the Palestine Herald-Press.
Union Pacific’s lawsuit, filed Nov. 27 with the U.S. District Courts in the Eastern District of Texas, alleges the railroad’s contract with Palestine should have been invalidated when the federal Surface Transportation Board became the nation’s regulating authority for freight rail in 1996; and again in 1997, when Union Pacific merged with the Missouri-Pacific Railroad.
The agreement requires the Omaha, Nebraska-based railroad to keep 0.52% of its total jobs in Palestine, local officials said.
Union Pacific operates around 32,000 miles of track in 23 Western states. The company had around 37,000 employees as of its last earnings report.
DETROIT (Reuters) – Fiat Chrysler Automobiles NV and the United Auto Workers (UAW) union on Saturday announced a tentative agreement for a four-year labor contract, a boost for the automaker as it works to merge with France’s Groupe PSA.
Italian-American Fiat Chrysler and PSA, the maker of Peugeot and Citroen, last month announced a planned $50 billion merger to create the world’s fourth-largest automaker.
The tentative agreement with Fiat Chrysler, which is subject to ratification by the union members, follows contracts that the UAW already concluded with Ford Motor Co and General Motors Co.
The deal with GM followed a 40-day strike in the United States that virtually shuttered GM’s North American operations and cost the automaker $3 billion.
The UAW on Saturday said the contract with Fiat Chrysler included a commitment from FCA to invest $9 billion, creating 7,900 new jobs over the course of the four-year contract. Of the $9 billion, $4.5 billion was announced earlier this year, to be invested in five plants and creating 6,500 jobs.
Detailed terms of the tentative agreement were not released, but they are expected to echo those under the new contracts with GM and Ford, as the UAW typically uses the first deal as a pattern for the others.
“FCA has been a great American success story thanks to the hard work of our members,” UAW acting President Rory Gamble said in a statement. “We have achieved substantial gains and job security provisions for the fastest growing auto company in the United States.”
Ratification is not a sure thing. Rank-and-file UAW members at FCA in 2015 rejected the first version of a contract. In addition, a lawsuit related to a federal corruption probe could also raise doubts among union members about the terms agreed.
The federal corruption led GM to file a racketeering lawsuit against FCA, alleging that its rival bribed union officials over many years to corrupt the bargaining process and gain advantages, costing GM billions of dollars. FCA has brushed off the lawsuit as groundless.
Under the UAW’s deal with GM, the automaker agreed to invest $9 billion in the United States, including $7.7 billion directly in its plants, and to create or retain 9,000 UAW jobs.
Ford’s contract included commitments to invest more than $6 billion in its U.S. plants and to create or retain more than 8,500 UAW jobs.
The deals with GM and Ford also created a pathway to full-time employment for temporary workers and left healthcare insurance coverage unchanged.
Both automakers also agreed to signing bonuses, with $9,000 for full-time Ford workers and $11,000 for workers at GM.
(Reporting by Nick Carey; Editing by Leslie Adler)
FILE PHOTO: FCA’s Manley and Elkann speaks at the North American International Auto Show in Detroit, Michigan
