Tag: automation

Eve Air Mobility and SkyScape announce first urban ATM agreement in Japan

February 19, 2024 / WIL BALDWIN

Singapore – February 20, 2024 – Eve Air Mobility (NYSE: EVEX) and SkyScape, a Japanese vertiport development and management company headquartered in Osaka, Japan, have announced an agreement to use Eve’s Urban ATM (air traffic management) as a part of the Advanced Air Mobility (AAM) concept of operations published by the Japanese government. The announcement makes Skyscape Eve’s 13th Urban ATM customer and it becomes its sixth Urban ATM vertiport customer as the company continues to grow its business globally.

Eve’s Urban ATM software solution is a key enabler to the efficient implementation and scalability of urban air mobility (UAM) by providing services for air navigation service providers, urban authorities, fleet operators, vertiport operators, and other UAM stakeholders. The solution includes UAM flight coordination, vertiport automation airside support, airspace flow management and conformance management.

As part of the agreement, the two companies will collaborate in a number of different ways including promoting Urban Air Mobility in Japan and the test and trial of Urban ATM software including data collection and sharing. The companies will also work together on showcasing eVTOL design and testing, vertiport design, operation certification and future autonomous operation development at SkyScape locations including their planned country research site known as the “Integrated Aviation Center” (IAC) when it opens in the future.

Forward-Looking Statements

This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

Pratt & Whitney expands site at Eagle Services Asia facility in Singapore

February 19, 2024 / WIL BALDWIN

Singapore, February 19, 2024, PRNewswire – (Singapore Airshow) Pratt & Whitney, an RTX (NYSE: RTX) business, today announced the official opening of a 48,000 square-foot expansion of its Singapore based engine center, Eagle Services Asia (ESA). The facility will grow its GTF capacity by two-thirds this year.

The transformative technology insertion applied across both ESA sites integrates robotics, automation and machine learning to increase efficiency, lower stress on machine operators and increase safety for key MRO processes.

These innovations include fully automated high-pressure compressor (HPC) rotor stacking, a Receive-in-Check Cobot that augments the work done by human inspectors and a robotic arm to install and remove HPC bearing sleeves.

ESA, a joint venture between SIA Engineering Company and Pratt & Whitney, is a member of the Pratt & Whitney GTF™ MRO network. Since introducing GTF MRO capability in 2019, the facility has already completed over 500 GTF engine overhauls.

Forward-Looking Statements

DHL supply chain invests 500 million euros in focus on Latin America

July 13, 2023 / WIL BALDWIN

In view of the global trend of omni-sourcing, DHL (OTC: DHLGY) Supply Chain, the world’s leading logistics company and part of DHL Group continues its strategic investments into emerging markets and fast-growing economies.

Today, DHL Supply Chain announces a landmark investment of €500 million into the strategically located Latin American markets. These investments made until 2028 are supposed to strengthen DHL’s operations in Latin America. Projects include decarbonizing the domestic fleet through greener alternatives; building, developing and retrofitting its real estate assets and warehouses in the market; as well as significant investments into new technologies, robotics and automation solutions intended to improve workplaces whilst at the same time making operations more effective, flexible and resilient for customers. The investment is part of DHL Supply Chain’s strategic investment plan to further strengthen logistics capabilities in high-demand sectors, such as: Healthcare, automotive, technology, retail, e-commerce, among others.

With the investment into its Latin America infrastructure the DHL Supply Chain is now complementing a long-standing history of strategic investments, acquisitions, and partnerships in the region. Not only the geographical proximity to large consumer markets in North America make the region a springboard to accelerate further growth, it is also the regions own booming sales markets which make it attractive for industries to invest and therewith request additional logistics support.

Boeing Digital Services to Optimize Planning and Operations for Frontier Airlines

December 10, 2020 / WIL BALDWIN

Boeing (NYSE: BA) announced a new 10-year agreement with North American carrier Frontier Airlines to implement a range of crew, flight-planning and operations tools to enhance efficiency for the airline.

These digital solutions from Boeing’s Jeppesen product range provide fleet-wide cost savings across regional and international routes, enhance airline crew-planning processes and increase operational reliability.

“We are fully confident that these robust Jeppesen flight-planning and operational tools will bring tremendous benefit to Frontier’s operations from day one following implementation,” said Brad Lambert, vice president of Flight Operations for Frontier Airlines. “From maintenance and operational planning to day-of and irregular operations, the Jeppesen automation and crew-management tools will complement our low-cost business model while contributing to our system reliability and efficiency.”

In addition to its digital navigation and charting services from Boeing, Frontier Airlines will use a new Jeppesen digital solutions suite that provides day-of-operations decision-support tools, including:

– Flight-planning and scheduling services to enhance flight operations and enable on-time departures and efficient routing

– Crew management, tail assignment and operations-control tools that optimize schedules and aircraft utilization in the short- and long-term planning horizon, including day-of-operation issue detection and schedule recovery to minimize issues due to unexpected events

“As commercial aviation emerges from the COVID-19 pandemic, Frontier Airlines is poised to continue its exceptional growth, utilizing Boeing’s analytics-powered tools to maximize performance and reduce costs during this critical moment for our industry,” said Ted Colbert, president and CEO of Boeing Global Services. “This is a great example of our partnership with customers like Frontier to turn Boeing’s unparalleled digital expertise into operational bottom-line advantages.”

Frontier Airlines is committed to “Low Fares Done Right.” Headquartered in Denver, the company operates more than 100 aircraft with a route network spanning the U.S., the Caribbean and Mexico. With 160 new planes on order, Frontier will continue to grow to deliver on the mission of providing affordable travel across America.

Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As a top U.S. exporter, the company supports commercial and government customers in more than 150 countries, leveraging the talents of a global supplier base. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.

Rolls-Royce is to supply complete MTU propulsion systems for five new Type 31 general-purpose frigates for the Royal Navy. In total, the order comprises of 40 engines and generator sets to be used for main propulsion and on-board power generation, the MTU Callosum propulsion control and monitoring system, and Integrated Logistics Support (ILS). Rolls-Royce liefert komplette MTU-Antriebssysteme für fünf neue Type-31-Mehrzweckfregatten der britischen Royal Navy. Der Auftrag umfasst insgesamt 40 MTU-Hauptantriebsmotoren und Bordstromaggregate, das Antriebssteuerungs- und Überwachungssystem MTU Callosum und die dazugehörige integrierte logistische Unterstützung (ILS).

Rolls-Royce Wins Contract for MTU Propulsion System for Royal Navy Type 31 Frigates

May 30, 2020 / WIL BALDWIN

Delivery scope: 20 main propulsion engines and 20 on-board generator sets, Callosum marine automation and integrated logistic support
MTU propulsion solutions from Rolls-Royce now feature in almost all current and future Royal Navy vessels

Each new Type 31 frigate of the Royal Navy will be powered by four MTU 20V 8000 M71 engines, each delivering over 8,000 kW. Die neuen Type-31-Fregatten der britischen Royal Navy werden von je vier MTU-Motoren des Typs 20V 8000 M71 mit einer Leistung von über 8000 Kilowatt angetrieben.

Rolls-Royce is to supply complete MTU propulsion systems for five new Type 31 general-purpose frigates for the Royal Navy. In total, the order comprises of 40 engines and generator sets to be used for main propulsion and on-board power generation, the MTU Callosum propulsion control and monitoring system, and Integrated Logistics Support (ILS). Each new frigate will be powered by four MTU 20V 8000 M71 engines, each delivering over 8,000 kW. On-board power will be provided on each vessel by four MTU generator sets based on 16V 2000 M41B units, each delivering in excess of 900 kW. In September 2021, Rolls-Royce will deliver the first shipset comprising four main propulsion engines and four generator sets to prime contractor Babcock International Group. Integrated Logistics Support for propulsion and onboard power systems will ensure efficient and cost-effective maintenance throughout their entire service life. It is expected that the MTU Callosum propulsion control and monitoring system will be officially added to the supply contract very shortly.

Sean Donaldson, Managing Director for Energy & Marine at Babcock International, said: “We’re delighted to welcome Rolls-Royce with its MTU solutions as a supplier to our Type 31 Programme. Its engines and on-board generator sets are already proving their mettle in numerous comparable vessels worldwide.”

Knut Müller, Vice President Marine & Defense at Rolls-Royce business unit Power Systems, said: “We’re very proud of the fact that Babcock International Group has opted for MTU propulsion and on-board power solutions on this highly significant project. MTU products now feature in almost all current and future projects of the Royal Navy. That is impressive proof of the trust our British partners place in us and of the reliability and flexibility of our products.”

The Royal Navy relies on Rolls-Royce propulsion solutions across its surface and submarine fleets. MTU Series 2000, 4000 and 8000 units will feature in future in most Royal Navy warships – in destroyers (Type 45), all frigate classes (Type 23, 26, 31) and submarines (Astute class).

U.S. Transportation Department Office of Inspector General to Audit FAA Pilot Training Requirements

February 10, 2020 / WIL BALDWIN

WASHINGTON (Reuters) – The U.S. Transportation Department’s Office of Inspector General said on Monday it will audit Federal Aviation Administration pilot training requirements for U.S. and foreign air carriers after two deadly crashes of Boeing’s <BA> 737 MAX.

The audit will also review international civil aviation authorities’ requirements for carriers’ pilot training regarding the use of flight deck automation.

Pilots have been harshly critical of Boeing’s decision not to disclose details of a new automation system – known as the Maneuvering Characteristics Augmentation System, or MCAS – that has been linked to both fatal crashes.

The Inspector General cited a report by Indonesia’s Lion Air that “responses to erroneous activations of MCAS contributed to the crash, raising international concerns about the role of pilot training.”

The report said Boeing’s safety assessment assumed pilots would respond within three seconds of a system malfunction. But on the fatal flight and one that experienced the same problem the previous evening, it took both crews about eight seconds to respond.

Boeing declined to comment on the new review.

The FAA said it would cooperate with the inspector general’s review. “Raising and harmonizing pilot training standards across the globe are among the FAA’s top aviation safety priorities,” the FAA said. “We continue to pursue expanded conversations among the world’s aviation regulators to identify ways to enhance international aviation safety through robust pilot training programs.”

Boeing has proposed new simulator training for pilots on a series of scenarios before they are allowed to resume 737 MAX flights.

The MAX is not expected to be freed to fly until late April at the earliest. In March, the department’s IG said it would audit the FAA’s certification of the Boeing 737 MAX.

The Trump administration on Monday proposed an additional $30 million in it 2021 budget “to improve aviation oversight, following recommendations from the Boeing 737 MAX investigations.”

The funding would support 13 new full-time positions for the creation of an office mandated by Congress to oversee the FAA’s delegation of some certification tasks to Boeing and other plane-makers. The FAA would also use some of the funds for data collection and for “technological advances that we use to assess safety data,” Deputy FAA Administrator Dan Elwell said.

(Reporting by David Shepardson; Editing by Dan Grebler)

FILE PHOTO: Aerial photos show Boeing 737 Max airplanes on the tarmac in Seattle

Alstom to Construct the New Metro for the Métropole Aix-Marseille-Provence

November 27, 2019 / WIL BALDWIN

Alstom is to carry out the renewal and automation of Marseille metro for the sum of 430 million euros financed by Métropole Aix-Marseille-Provence. As part of this contract, Alstom will develop, supply and install the operating system and equipment for the automatic operation of the network’s two lines. Alstom will also commission 38 new rubber-tyred metros (4 cars) and modernise all the audiovisual passenger information inside the stations. The new trains are scheduled to enter service in early 2024.

The trains will run in semi-automatic mode with drivers until mid-2025 on line M2 and until 2026 on line M1, before switching to full automation.

“It is a great honour for us to contribute to modernising the mobility offer of Métropole Aix-Marseille-Provence. Our metro experts are already at work on several of our French sites to get started quickly with developments,” says Jean-Baptiste Eyméoud, Senior Vice-President France at Alstom.

The new trains, based on Alstom’s rubber-tyred metro solutions, will incorporate the latest technological developments to increase comfort, availability, accessibility and passenger information, as well as facilitate maintenance.

Each 4-car train, 65 metres long and in “boa”[1] configuration, will be able to carry up to 500 passengers[2]. The sleekly designed trains will feature large bay windows, a highly efficient air conditioning system and modern passenger information systems, providing a pleasant on-board experience. Alstom called on Marseille designers Ora-ïto and Fabien Bourdier for the design and the sound conception of the new trains.

Three designs were proposed to the Metropole Aix-Marseille-Provence, which chose to set up an Internet consultation to give residents the opportunity to give their opinion on the design they would like to see selected.

The new metros for Marseille are environmentally friendly and will be eco-designed, enabling them to be 96% recoverable at the end of their lifespan. They will consume 25% less energy than the metros currently in service, thanks in particular to electric braking (up to 0 km/h), LED lighting and other optimisations.

For the automation system, Alstom will provide its Urbalis 400 solution, already deployed on more than 1,500 kilometres of metro lines worldwide. The Marseille metro will benefit from a proven, continuously improved system (on-board computers equipped with the latest technology, vital computers that are over 99% available, beacon tracker, etc.).

Alstom currently equips 25% of the CBTC[3] metro automations in service (60 lines, including 28 fully automated lines).

In total, more than 400 people in France will work on this project, including more than 60 in Métropole Aix-Marseille-Provence. Jobs will also be generated at our suppliers in France, but also in the Métropole for the installation and deployment of the signalling system.

Alstom will draw on the excellent skills of six of its French sites: Aix-en-Provence for the project management, Valenciennes for the design, interior layout, assembly, tests and validation of the trains, Ornans for the engines, Le Creusot for the bogies, Villeurbanne for the on-board electronics, passenger information, predictive maintenance and signalling system equipment, and Saint-Ouen for the coordination of the artistic design, development and integration of the signalling system.