TOMORROWS TRANSPORTATION NEWS TODAY!

Tag: complete (Page 1 of 2)

Pratt & Whitney expands site at Eagle Services Asia facility in Singapore

Singapore, February 19, 2024, PRNewswire – (Singapore Airshow) Pratt & Whitney, an RTX (NYSE: RTX) business, today announced the official opening of a 48,000 square-foot expansion of its Singapore based engine center, Eagle Services Asia (ESA). The facility will grow its GTF capacity by two-thirds this year.

The transformative technology insertion applied across both ESA sites integrates robotics, automation and machine learning to increase efficiency, lower stress on machine operators and increase safety for key MRO processes.

These innovations include fully automated high-pressure compressor (HPC) rotor stacking, a Receive-in-Check Cobot that augments the work done by human inspectors and a robotic arm to install and remove HPC bearing sleeves.

ESA, a joint venture between SIA Engineering Company and Pratt & Whitney, is a member of the Pratt & Whitney GTF™ MRO network. Since introducing GTF MRO capability in 2019, the facility has already completed over 500 GTF engine overhauls.

Forward-Looking Statements

This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

Copy Translate
Copy Translate

Airbus and Republic of Singapore successfully complete air to air refuelling flight test

Getafe, Madrid, Spain, October 11, 2023 – Airbus Group SE (Paris: AIR) and the Republic of Singapore Air Force (RSAF) worked together to successfully complete the automatic air-to-air refuelling (A3R) flight test campaign with the Airbus A330 Multi Role Tanker Transport (MRTT) and F-15 fighter, ahead of its certification in the first half of 2024.

Over the course of three weeks in August, a RSAF A330 MRTT made more than 500 automated wet and dry contacts with the air force’s full fleet of receiver aircraft, including the F-15SG aircraft, a customised variant of the US-built F-15E Strike Eagle air-to-ground fighter jet.

The flight tests with F-15SG were conducted in Singapore, covering the whole operational AAR envelope in different weather conditions under the supervision of the Spanish certifying authority, called INTA (National Institute for Aerospace Technology).

Rolls-Royce to complete initial F130 engine testing for B-52J by year end

Rolls-Royce (OTC: RYCEY) today announced that it is on track to complete initial F130 engine testing for the United States Air Force B-52J Stratofortress by the end of the year. Continued Rapid Twin Pod Tests at NASA Stennis Space Center in Mississippi have accomplished all of Rolls-Royce’s initial goals and allowed for the gathering of unprecedented amounts of data early in the program, further de-risking the integration of the F130 engine onto the B-52J.

In September 2021, Rolls-Royce F130 engines were selected by the Air Force to replace the existing powerplants in the B-52 fleet, with over 600 new engine deliveries expected. The new engines will extend the life of the B-52 aircraft for 30 years and are so durable they are expected to remain on wing for the remainder of the aircraft life.

F130 engines will be manufactured, assembled and tested at Rolls-Royce facilities in Indianapolis, the company’s largest production facility in the U.S. The F130 is derived from the Rolls-Royce BR family of commercial engines, with over 30 million hours of operation and a high reliability rate. It’s a proven, dependable engine with a fuel-efficient design.

 

 

Hola

Loft Orbital Signs Agreement to Procure Over 15 Airbus Arrow Satellite Platforms

Airbus (OTC: EADSY) has been contracted to supply space start-up Loft Orbital with more than fifteen satellite platforms derived from the Airbus Arrow platform.  Arrow is the foundational satellite platform of the OneWeb constellation. There are 394 Airbus Arrow platforms in orbit for the OneWeb constellation and a further 254 are being produced to complete the 648 spacecraft required by OneWeb. With this acquisition, Loft Orbital confirms its intention to make the Airbus Arrow platform a true workhorse enabling its service business model.

Loft Orbital offers a true end-to-end service enabling customers to rapidly deploy and operate their payloads on reliable high-performance satellites at an unprecedented simplicity and affordability. Loft Orbital has also contracted Airbus to modify the Arrow platform to make it suitable for a wider range of longer lifetime missions and applications. Loft Orbital has offices both in the USA and France, being based in the heart of Silicon Valley in San Francisco, and in the European space capital Toulouse, and intends to continue rapidly growing its French presence following this contract relationship with Airbus.

The improvements to the Arrow platform, including all the engineering, qualification, test, and production of the first few spacecraft will be performed by Airbus in Toulouse. The production at scale of the remaining Arrow-derived platforms will be performed by Airbus OneWeb Satellites (AOS).

Airbus Space’s strategy of Next Space will seek further engagement with new players in the space ecosystem to ensure that sustainability and reliability in the LEO space environment is guaranteed for the future.

Rolls-Royce Strengthens Position in China with New MTU Engine Test Bench

Rolls-Royce (London: RR.L) business unit Power Systems is strengthening its research and development (R&D) capabilities in China with a new test bench for MTU engines at the company’s location in Suzhou. The new test bench was inaugurated as part of an event celebrating 25 years of the Rolls-Royce location’s existence. The R&D test bench can accommodate MTU engines with a power output of up to 3,600 kW and will be used to test parts, engines and complete systems for power generation and industrial applications.

The new R&D test bench in Suzhou will first be used for test runs of gensets based on MTU 16V 4000 engines, starting in 2022. It is suitable for testing a wide range of versions of the versatile Series 4000 engine which is also celebrating its 25th anniversary this year. A further upgrade of the test bench is planned for 2022: The capabilities will be extended to testing MTU Series 2000 engines as well.

The company opened its first facility in Suzhou 25 years ago to provide customers in China with faster and more efficient after-sale services in applications such as railway, marine and power generation. Suzhou later became the third production base for MTU engines globally at that time, responsible for the assembly of MTU Series 2000 gendrive engines. Branches in Beijing, Shanghai and Dalian were also established gradually. In October 2021, the former MTU Engineering (Suzhou) Co.,Ltd. was renamed Rolls-Royce Solutions (Suzhou) Co., Ltd.

With the new test bench, the localization strategy of Rolls-Royce Power Systems in Suzhou is now covering the whole process ranging from sales and services to manufacturing and R&D.

Qantas and Jetstar Plan to Resume International Flights in Late October

Qantas (ASX: QAN.AX) and Jetstar are planning to restart regular international passenger flights to most destinations starting 31 October 2021 – a four month extension from the previous estimate of July, which had been in place since mid-2020.

The date change aligns with the expected timeframe for Australia’s COVID-19 vaccine rollout to be effectively complete.

Capacity will be lower than pre-COVID levels, with frequencies and aircraft type deployed on each route in line with the projected recovery of international flying. International capacity is not expected to fully recover until 2024.

The Group remains in close consultation with the Federal Government around the reopening of international borders and will keep customers updated if further adjustments are required.

Qantas is assessing the use of digital health pass apps to help support the resumption of COVID-safe international travel. The CommonPass and IATA Travel Pass smartphone apps are being trialled on the airline’s international repatriation flights.

Qantas network

Qantas is planning to resume flights to 22 of its 25 pre-COVID international destinations including Los Angeles, London, Singapore and Johannesburg from 31 October 2021.

Qantas won’t initially resume direct flights to New York, Santiago and Osaka, but remains committed to flying to these three destinations. In the meantime, customers will be able to fly to these destinations under codeshare or oneworld arrangements with partner airlines.

Jetstar network

Jetstar plans to resume flights to all of its 13 international destinations. Frequencies will be adjusted in line with the projected recovery of international flying.

Trans-Tasman

Qantas and Jetstar are planning for a significant increase in flights to and from New Zealand from 1 July 2021.

The Group has the ability to respond to travel bubbles that may open.

Additional flexibility and extension of credit vouchers     

Qantas has today announced additional flexibility for international bookings to enable customers to book flights with confidence.

Qantas’ updated Fly Flexible policy (previously only available for domestic and Trans Tasman flights) now applies to international flights booked from today until at least the end of April 2021. The flight date can be changed to any available for sale at the time (up to 355 days in advance). Qantas will waive the change fee however a fare difference may apply.

Qantas has also extended credit vouchers to enable travel until 31 December 2023 on domestic or international flights, with Jetstar doing the same for vouchers issued due to COVID-19 disruptions.

Customers with international bookings impacted by cancellations will be contacted directly and offered alternatives.

Wynn Las Vegas Announces June 4 Reopening Date

  • Five-Star Resort Returns With Full Array of Luxury Amenities and Industry-Leading Health & Safety Plan

LAS VEGAS, May 27, 2020 /PRNewswire/ — Wynn Las Vegas (Nasdaq: WYNN) announced today a reopening date of Thursday, June 4, under phase two of the Nevada United: Roadmap to Recovery plan from Governor Steve Sisolak. As the largest five-star resort in the world, Wynn Las Vegas plans to offer guests a complete Las Vegas experience by opening every amenity and outlet available. Both hotel towers and the casino as well as all restaurants will reopen on June 4, followed by the resort’s newest restaurant, Elio, later in the month. Every effort has been made to present Wynn’s complete luxury experience and provide guests with the peace of mind needed to enjoy a fun and relaxing return.

In preparation, the Company has created a comprehensive new Health & Safety Plan that is now considered the gold standard in the hospitality industry.

“We are ready to provide our guests with a full Las Vegas experience with a collection of luxury amenities and unmatched service,” said Wynn Resorts CEO Matt Maddox. “At the same time, our extensive Health & Safety Plan, validated by the nation’s leading public health experts, will enable a safe environment for our guests. The entire Wynn team is looking forward to welcoming our guests back.”

Wynn will reopen withthe full Las Vegas experience guests expect and deserve, with everything conveniently and safely available under one roof, allowing for the perfect getaway. From lounging by pristine pools to lively late-night betting – and most everything in between – the very best of Wynn’s renowned glamour, excitement, and luxury will be available, including:

  • Both Wynn and Encore hotel towers
  • Two 24-hour casinos with a variety of table games and slots as well as the Race & Sports Book
  • The resort’s full portfolio of fine-dining restaurants, lounges, and casual eateries, several with outdoor seating on open verandas and patios
  • Expansive resort pools with private cabanas
  • Wynn’s 18-hole championship golf course
  • Nightly entertainment at the Lake of Dreams
  • Three retail esplanades
  • Full-service beauty salons, barber shop, spa treatments and fitness centers

In addition, several thoughtful new measures in social distancing, touchless technologies, and cleaning protocols have been incorporated throughout the resort in a clear and transparent effort to protect the well-being of all guests. Most notable among the enhancements are:

  • Non-invasive thermal temperature checks and face coverings provided at all entrances
  • Automatic hand sanitizer stations, UV Technology, and electrostatic sprayers will be utilized throughout the resort
  • Sealed guest rooms after meticulous sanitization by Wynn’s professional housekeeping staff    
  • Amenity kits including sanitizing wipes, hand sanitizer, and face coverings in each guest room
  • Dedicated team of cleaning professionals sanitizing public guest areas 24 hours a day

Wynn employees are required to wear face coverings at all times, and most importantly, have all been tested for COVID-19 before returning to work.

The Wynn Resorts Health & Safety Plan was created in consultation with leading public health medical professionals from Georgetown and Johns Hopkins Universities in addition to recommendations from the U.S. Centers for Disease Control and Prevention (CDC), the Southern Nevada Health District (SNHD) and the Gaming Control Board (GCB). The full plan can be viewed on www.wynnlasvegas.com.

Alstom to Supply 17 Additional Citadis Trams to Strasbourg

Alstom will supply 17 additional Citadis trams to the Strasbourg Transport Company (CTS) and the Eurometropole of Strasbourg for the sum of €52 million. This order will complete the fleet of 63 trams delivered by Alstom between 2003 and 2019, and confirms a partnership of almost 20 years between Alstom and CTS. The last option exercise, signed in March 2016, was for 10 Citadis trams for the extensions of lines A and D. 

These 17 new trams will reinforce the existing lines, including line D, which serves the city centre of Kehl in Germany. The Citadis tramway is the first to cross a border in France and is approved according to the BOStrab, the German federal decree on the construction and operation of trams in Germany.

“With this new order, CTS is the French customer that will own one of the largest Citadis tram fleets with a total of 80 trainsets ordered. We are very proud to be continuing this partnership initiated in 2003, proving that the Citadis range meets the evolving needs of our customers,” says Jean-Baptiste Eyméoud, Managing Director of Alstom in France. 

The Citadis trams for Strasbourg are 45 metres long and have a capacity of 288 passengers. They are fitted with LED lighting and all-glass doors to enhance comfort and safety for passengers. Complying with the latest standards, the trams are equipped with double doors accessible to PRMs (People with Reduced Mobility), wider seats and areas reserved for wheelchair and stroller users. 

These trams will be designed and manufactured mainly in France: La Rochelle (design and assembly of the trainsets), Le Creusot (bogies for the intermediate modules), Tarbes (components of the traction chain), Villeurbanne (electronic equipment) and Saint-Ouen (design). The bogies situated under the driver cabins will be manufactured at Alstom’s site in Salzgitter, Germany. 

In total, more than 2,600 Citadis trams have been sold to more than 50 cities in 20 countries.

American Airlines Announces $550 Million Investment in Tulsa Maintenance Base

  • Facility employs more than 5,500 team members with 600 jobs added in 2019

American Airlines announced today it will invest $550 million at its Base Maintenance facility in Tulsa (Tech Ops – Tulsa). It is American’s largest Base Maintenance facility and is an integral part of operating the carrier’s fleet of nearly 1,000 mainline aircraft safely and reliably. 

Tech Ops – Tulsa is home to more than 5,500 team members — 600 of those positions were added in 2019 — and conducts nearly half of the airline’s overall maintenance work. The new project includes construction of a new widebody-capable hangar and base support building. The investment also provides for improvements to the existing infrastructure, including roof replacements, utility and IT upgrades, and ramp repairs. This is the largest investment ever made at a maintenance location in American’s history. 

This investment underscores American’s long-term commitment to the Tech Ops – Tulsa team, State of Oklahoma and City of Tulsa by making improvements to ensure success.

“The American team in Tulsa and around the world is the best in the business when it comes to operating the safest and most reliable fleet of commercial aircraft,” said American’s Chairman and CEO Doug Parker. “Tulsa has been core to American’s operation for more than 70 years, and this investment in the base, along with the new positions we added at Tech Ops – Tulsa in 2019, will ensure our customers can continue to rely on our fleet as the safest and most reliable for decades to come.” 

The new 193,000-square-foot hangar will be able to hold two widebody aircraft — or up to six narrowbody aircraft — and will replace two existing hangars that can no longer fully accommodate the size of American’s current aircraft. This will allow team members to continue maintenance work on the more than 900 aircraft that visit the site annually while also adding to the widebody hangar capacity in American’s system. The 132,000-square-foot base support building will include offices for teams in administrative functions for aircraft overhaul, engineering and more.

“With this historic investment, American Airlines continues to display their commitment to Oklahoma. As one of the largest employers in our state, American Airlines plays an integral role in our economy and provides quality jobs for our citizens,” Oklahoma Governor Kevin Stitt said. “I am proud that Oklahoma is one of the top states in the nation for the aviation and aerospace industry, and I am honored to have American Airlines choose Oklahoma, once again, to grow their business.”

Oklahoma Governor Stitt, City of Tulsa Mayor G.T. Bynum and Tulsa Regional Chamber President and CEO Mike Neal joined American leadership and nearly 2,000 team members this morning at a ceremony to unveil the project. 

“This investment marks the largest single capital investment in our city’s history while also reflecting the long-term commitment of American Airlines to Tulsa,” Bynum said. “As a city, we are grateful that one of the largest employers in our community is a true partner with the kind of foresight that will create more opportunity in the next era of the aerospace sector.” 

The $550 million investment will take approximately seven years to complete and will involve upgrades to nearly every building. The new hangar and base support building construction is expected to begin in early 2021 and will take approximately 18 months to complete. 

“If there were any doubts about American’s long-term commitment to Tulsa, this transformative investment should put them to rest once and for all,” Neal said. “Through the Chamber-led regional economic development partnership Tulsa’s Future, and in collaboration with the City of Tulsa and State of Oklahoma, we’ve been able to support American’s continued growth in northeast Oklahoma. It’s been a personal privilege to work with American’s leadership team and Tulsa-area employees for more than 14 years, and we at the Chamber look forward to further strengthening this partnership for decades to come.”

Click the link below for more info on AA’s Tulsa Operations! http://news.aa.com/news/news-details/2020/American-Airlines-Announces-550-Million-Investment-to-its-Tulsa-Maintenance-Base-OPS-INF/default.aspx

Air Niugini Delays Delivery of Four 737 MAX Jets Until at Least 2024

A Boeing 737 Max aircraft taxis the runway at the Renton Municipal Airport in Renton

SYDNEY (Reuters) – Papua New Guinea carrier Air Niugini has updated its contract with Boeing Co <BA> to delay the delivery of its four 737 MAX jets on order until at least 2024, the airline’s chief executive said on Tuesday.

The carrier had been due to receive its first 737 MAX this year.

Air Niugini Chief Executive Alan Milne told Reuters the delay would give the airline more time to complete a broader review of its fleet plans, including a replacement for its smaller Fokker jets.

“This will then determine if the MAX is still appropriate for Air Niugini, or whether another Boeing product would better suit as a replacement for the 737/767,” he said, in reference to older models in the airline’s fleet.

Milne said it was possible the 737 MAX orders could be switched to the smaller Embraer SA <ERJ> E2 family if Boeing’s deal to buy the bulk of the Brazilian planemaker’s commercial division closes.

“Air Niugini is a valued Boeing customer and we are working closely with the airline to meet its evolving fleet requirements,” a Boeing spokesman said. “Unfortunately, we do not disclose ongoing customer discussions and have no further comment.”

Some other Boeing customers, including Malaysia Airlines, Virgin Australia Holdings Ltd <VBHLF> and Norwegian Air Shuttle ASA’s <NWARF> leasing arm have also postponed the delivery of 737 MAX jets since the model was grounded globally last March after two fatal crashes.

Boeing confirmed on Monday that it has temporarily halted production of the 737 MAX in Washington State in recent days. The company had said in December it would halt production at some point this month.

(Reporting by Jamie Freed; Editing by Paul Simao and Sam Holmes)

« Older posts