Tag: course

Airbus and Air India to launch pilot training center

January 22, 2024 / WIL BALDWIN

Hyderabad, Telangana, India, January, 2024 – Delivering on its commitment to ‘Skill India’, Airbus Group SE (Paris: AIR) has entered into a 50:50 joint venture with the Tata-owned Air India to launch a world-class pilot training centre in Gurugram, Haryana. The Tata Airbus Training Center will offer A320 and A350 flight training to some 5,000 new pilots over 10 years. The sprawling 3,300 sq.mt. centre will be equipped with 10 Full Flight Simulators (FFS), flight training classrooms and briefing and debriefing rooms as part of the complete Airbus Flight Training Device setup.

The training centre is due to be operational starting early 2025 with the initial installation of four A320 FFS. The Tata Airbus Training Centre will offer courses approved by Directorate General of Civil Aviation (DGCA) and European Union Aviation Safety Agency (EASA).

Airbus has also partnered with GMR Aero Technic to offer Aircraft Maintenance Engineering training courses at the latter’s facility in Hyderabad. Airbus will provide training material such as trainee handbooks, examination database, online access to Airbus customised training modules and Airbus Competence Training (ACT) for Academy media package. Airbus will also train GMR instructors and provide continual assessment of the training center.

Forward-Looking Statements

This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

KiwiRail’s next stage of upgrades focused on reducing commuter disruptions

October 8, 2023 / WIL BALDWIN

The next stage of KiwiRail’s network rebuild in Auckland will be a lot less disruptive than the previous stages. Since the start of 2023, KiwiRail has had to fully close rail lines in Auckland for work to upgrade and prepare the metro rail network for the more frequent metro trains to come when the City Rail Link opens.

Auckland Transport’s Executive General Manager Public Transport Services Stacey van der Putten says the reduced disruption for Stage 3 will come as welcome news to Auckland’s rail passengers.

During the rebuild period, Western Line trains will run on a single track affecting service frequencies, and timetables will be confirmed in due course.

Details of alternative public transport options will be available on the AT website www.AT.govt.nz/RailRebuild

Garmin Certifies the GFC 600 Digital Autopilot in Select Pilatus PC-12 Aircraft

June 22, 2021 / WIL BALDWIN

Garmin International Inc. (Nasdaq: GRMN), a unit of Garmin Ltd., today announced it has received Federal Aviation Administration Supplemental Type Certificate approval for the GFC 600 digital autopilot in select Pilatus PC-12/41 and PC-12/45 aircraft. The GFC 600 digital autopilot is optimized to meet the demands of turbine aircraft, delivering superior in-flight characteristics and operational capabilities such as Vertical Navigation (VNAV), automatic Course Deviation Indicator (CDI) switching when paired with a GTN Series navigator, enhanced go-around capability and much more.

The GFC 600 certification for the PC-12 boasts superior integration with a TXi flight display configured as a primary flight display (PFD) to provide owners and operators an advanced autopilot solution that considers the wide range of speed and performance characteristics of these turbine aircraft. Further, the GFC 600 incorporates solid-state attitude with robust self-monitoring capabilities to provide superior autopilot performance, greater reliability and renowned safety benefits. Environmentally hardened autopilot servos designed for harsh operating conditions contain brushless DC motors offering improved performance and reducing maintenance requirements when compared to decades-old servo designs on the market today. Standard mark-width (6.25-inch) design of the GFC 600 mode controller ensures the autopilot controller allows for routine installation into the aircraft’s avionics stack.

Going beyond traditional autopilot capabilities such as altitude hold, vertical speed and heading modes, the GFC 600 also includes altitude preselect, VNAV, Level Mode with the LVL button, underspeed and overspeed protection and more. Pilots can also select, couple and fly various instrument approaches, including GPS, ILS, VOR, LOC and back course approaches when paired with a compatible GPS navigator.

Additional benefits of the GFC 600 digital autopilot for turbine aircraft include:

Premium functions and advanced capabilities such as altitude pre-select on a TXi flight display configured as a PFD and indicated airspeed hold mode;
Built-in GPS roll steering capability eliminates the need for external roll steering converters, allowing for smoother navigation tracking when installed with a compatible navigator;
Yaw Damping (YD) mode minimizes yawing oscillations while also helping to maintain coordinated flight;
Flight Director command bars displayed on a TXi flight display configured as a primary flight display (PFD);
Coupled ‘go-arounds’ during missed approach sequencing with a remotely-installed go-around button that commands the Flight Director to display the appropriate pitch attitude required for the missed approach procedure and activates a loaded missed approach when paired with a
GTN 650/750 or GTN 650Xi/750Xi navigator;
Control wheel steering allows the pilot to adjust pitch, roll, altitude hold, vertical speed or airspeed references using the control yoke while the autopilot is engaged.

Garmin Gets Approval for GFC 600 Digital Autopilot in Select King Air C90 and E90 Aircraft

January 22, 2021 / WIL BALDWIN

OLATHE, Kan./Jan. 21, 2020/ – Garmin^® International Inc., a unit of Garmin Ltd., today announced it has received Federal Aviation Administration (FAA) Supplemental Type Certificate (STC) approval for the
GFC^™ 600 digital autopilot in select Beechcraft King Air C90 aircraft and E90 aircraft¹. The GFC 600 digital autopilot is optimized for turbine aircraft, delivering superior in-flight characteristics and new operational capabilities such as Vertical Navigation (VNAV), automatic Course Deviation Indicator (CDI) switching when paired with a GTN Series navigator, enhanced go-around capability and much more.

The GFC 600 certification for the Beechcraft King Air C90 and E90 provides owners and operators an autopilot upgrade that boasts superior integration potential with G600 and G600 TXi^™ flight displays, the
GI 275 electronic flight instrument, as well as the GTN^™ and GTN Xi Series of navigators. The self-contained autopilot controller incorporates backlit keys and a bright, sunlight readable display that depicts autopilot status and mode selection. An intuitive built-in control wheel also provides convenient adjustment of aircraft pitch, airspeed and vertical speed modes. When the level button is selected, the aircraft automatically returns to straight-and-level flight.

Environmentally hardened autopilot servos designed for harsh operating conditions contain brushless DC motors offering improved performance and reducing maintenance requirements when compared to decades-old servo designs on the market today. In addition, these servos are optimized for turbine aircraft by offering more torque to help better command and respond to control demands required of turbine aircraft.

Standard mark-width (6.25-inch) design of the GFC 600 mode controller ensures the autopilot controller allows for routine installation into the aircraft’s avionics stack. Autopilot mode annunciation is available on the G600 TXi touchscreen glass flight display, as well as the G600 flight display. The addition of an optional autopilot annunciator panel also displays the selected autopilot mode in the pilot’s primary field of view and retains an identical footprint of third-party autopilot annunciators on the market.

Wynn Las Vegas Announces June 4 Reopening Date

May 28, 2020 / WIL BALDWIN

Five-Star Resort Returns With Full Array of Luxury Amenities and Industry-Leading Health & Safety Plan

LAS VEGAS, May 27, 2020 /PRNewswire/ — Wynn Las Vegas (Nasdaq: WYNN) announced today a reopening date of Thursday, June 4, under phase two of the Nevada United: Roadmap to Recovery plan from Governor Steve Sisolak. As the largest five-star resort in the world, Wynn Las Vegas plans to offer guests a complete Las Vegas experience by opening every amenity and outlet available. Both hotel towers and the casino as well as all restaurants will reopen on June 4, followed by the resort’s newest restaurant, Elio, later in the month. Every effort has been made to present Wynn’s complete luxury experience and provide guests with the peace of mind needed to enjoy a fun and relaxing return.

In preparation, the Company has created a comprehensive new Health & Safety Plan that is now considered the gold standard in the hospitality industry.

“We are ready to provide our guests with a full Las Vegas experience with a collection of luxury amenities and unmatched service,” said Wynn Resorts CEO Matt Maddox. “At the same time, our extensive Health & Safety Plan, validated by the nation’s leading public health experts, will enable a safe environment for our guests. The entire Wynn team is looking forward to welcoming our guests back.”

Wynn will reopen withthe full Las Vegas experience guests expect and deserve, with everything conveniently and safely available under one roof, allowing for the perfect getaway. From lounging by pristine pools to lively late-night betting – and most everything in between – the very best of Wynn’s renowned glamour, excitement, and luxury will be available, including:

Both Wynn and Encore hotel towers
Two 24-hour casinos with a variety of table games and slots as well as the Race & Sports Book
The resort’s full portfolio of fine-dining restaurants, lounges, and casual eateries, several with outdoor seating on open verandas and patios
Expansive resort pools with private cabanas
Wynn’s 18-hole championship golf course
Nightly entertainment at the Lake of Dreams
Three retail esplanades
Full-service beauty salons, barber shop, spa treatments and fitness centers

In addition, several thoughtful new measures in social distancing, touchless technologies, and cleaning protocols have been incorporated throughout the resort in a clear and transparent effort to protect the well-being of all guests. Most notable among the enhancements are:

Non-invasive thermal temperature checks and face coverings provided at all entrances
Automatic hand sanitizer stations, UV Technology, and electrostatic sprayers will be utilized throughout the resort
Sealed guest rooms after meticulous sanitization by Wynn’s professional housekeeping staff
Amenity kits including sanitizing wipes, hand sanitizer, and face coverings in each guest room
Dedicated team of cleaning professionals sanitizing public guest areas 24 hours a day

Wynn employees are required to wear face coverings at all times, and most importantly, have all been tested for COVID-19 before returning to work.

The Wynn Resorts Health & Safety Plan was created in consultation with leading public health medical professionals from Georgetown and Johns Hopkins Universities in addition to recommendations from the U.S. Centers for Disease Control and Prevention (CDC), the Southern Nevada Health District (SNHD) and the Gaming Control Board (GCB). The full plan can be viewed on www.wynnlasvegas.com.

Two U.S. Marines Killed in Arizona Helicopter Crash

March 31, 2019 / WIL BALDWIN

WASHINGTON, March 31 (Reuters) – Two U.S. Marine pilots died when their helicopter crashed near Yuma, Arizona, during a routine training mission, the Pentagon said on Sunday.

The Marines were flying an AH-1Z Viper helicopter as part of a weapons and tactics instructor course when the crash occurred late on Saturday, the Pentagon said.

The cause of the crash is being investigated. The Pentagon said the identities of the pilots would not be released for 24 hours pending notification of next of kin.

The AH-1Z Viper, a twin-engine attack helicopter built by Textron Inc subsidiary Bell Helicopter, entered production in late 2010. The Marine Corps was to acquire a total of 189 of the aircraft, according to a March 7 news release.

(Reporting by David Morgan; Editing by Dan Grebler and Daniel Wallis)