To keep a sea-going vessel like the Halunder Jet running reliably and sustainably, the crew need access to a host of relevant data on its condition. That’s where the Rolls-Royce Holdings PLC (OTC: RYCEY) mtu NautIQ Foresight can help.
In the North Sea, the crew onboard the Halunder Jet – a high-speed catamaran operated by ferry company FRS – is transporting passengers between Hamburg, Cuxhaven and Heligoland harbour in Germany.
With just four hours on Heligoland island to visit the ‘Tall Anna’ sea-stack, watch guillemots and gannets, or engage in some duty-free shopping, visitors want to make the most of every minute secure in the knowledge that they’ll be back on the mainland in time to catch their onward connections.
Uptime and reliability, therefore, are top priorities for the Halunder Jet’s operators, closely followed by cutting fuel consumption – an increasingly important consideration amid rising fuel prices and growing environmental awareness.
Leonardo celebrates today the 20th anniversary of the AW139 helicopter’s maiden flight. The first aircraft took to the skies from the Company’s facility in Cascina Costa di Samarate, Italy on 3 February 2001. The helicopter flew for 45 minutes checking initial airworthiness tests, hovering, lateral and forward flight, handling qualities and subsystems. This soon confirmed the impressive characteristics and the smoothness of the new model and its performance and capabilities were to become a new market benchmark, making it the most important helicopter programme in the last two decades at an international level.
The AW139 intermediate-twin engine 7 tonne boasts orders of almost 1,200 units from more than 280 customers in over 70 countries on all continents. The aircraft has shown extraordinary levels of reliability and operational capabilities with more than 3 million flight hours recorded since the first delivery took place at the beginning of 2004. Data of use testifies the extreme versatility of the AW139 which satisfies any market need: approximately half the world’s fleet for public utility tasks such as search and rescue and air ambulance, law enforcement, fire-fighting, disaster relief and military duties. The rest account for a leading position in its class in the offshore transport sector, plus VIP, institutional and corporate transport as well as other civil missions. The AW139 fleet has a global presence: around 30% in Europe, almost as much in Asia and Australasia, 15% in the Americas, followed by the Middle East. The international success of the AW139 is so important that to meet market demands the helicopter is produced on different assembly lines both in Italy, in the Vergiate plant, and in the United States in Philadelphia which has delivered around 30% of all units to date. The US Air Force will soon introduce the AW139-based Boeing MH-139 to replace the UH-1N fleet.
The AW139 has grown significantly over the years, adapting to the changing needs of customers. The maximum take-off weight increased from 6.4 to 7 tons. Almost 1,000 mission kits and equipment have been certified. With advanced protection systems against icing, the AW139 can fly in all-weather conditions. This model is also the only one in the world capable of continuing to fly for over 60 minutes without oil in the transmission, twice as much as the 30 minutes set by certification authorities. In 2020 new distinguished features for the avionics suite were introduced including synthetic vision, Enhanced Ground Proximity Warning System with offshore modes, improved 2D maps and wireless data loading, increasing crew situational awareness and reducing workload for operations at night or in marginal weather. Despite the experience and maturity achieved in almost 17 years of operational activity, the AW139 remains a young and modern programme, destined to play a leading role into the future. The AW139 truly embeds all areas of excellence and leadership in its field at Leonardo such as transmissions and dynamics, system integration and customization, best in class performance, mission versatility, latest safety standards and a comprehensive range of increasingly localised customer support and training services and solutions, developed and grown to allow customers worldwide to maximise the capabilities of the type.
The aircraft of choice in its class against which all existing and newcomers are measured, the AW139 also represents a turning point in the rotary-wing sector through the introductory concept of the Leonardo “helicopter family”. The AW139 is, in fact, the forefather of a helicopter family comprising of the smaller and lighter AW169 and the larger and heavier AW189. Models, the only case in the world, that share the same design philosophy, the same high performance, the same flight characteristics and the same certification standards, as well as the same approach to maintenance and training. A concept that allows operators with large diversified fleets, with models ranging from 4 to 9 tons of weight, to create significant synergies in crew training, flight operations, maintenance and logistics support.
FILE PHOTO: A passenger stands in front of a window where Qantas planes are parked at Melbourne Airport, Australia
SYDNEY (Reuters) – Qantas Airways Ltd <QABSY> said on Friday it has chosen Airbus SE <EADSY> as preferred supplier for jets capable of the world’s longest commercial flights from Sydney to London, beating rival Boeing Co <BA> after a hard-fought contest.
The choice of up to 12 A350-1000 planes fitted with an extra fuel tank for flights of up to 21 hours cements Airbus as the leader in ultra-long haul flying globally at a time when Boeing is battling delays on its rival 777X programme and a broader corporate crisis following two deadly 737 MAX crashes.
The Qantas flights would begin in the first half of 2023, but remain subject to reaching a pay deal with pilots, who would need to extend their duty times to around 23 hours to account for potential delays and switch between flying the A350 and the airline’s current A330 fleet. A final decision on an order is expected in March, the airline said.
Qantas Chief Executive Alan Joyce said the airline “had a lot of confidence” in the market for non-stop services from Sydney to London and to New York based on two years of flying non-stop from Perth to London, where it has achieved a 30% fare premium over one-stop rivals in premium classes.
“The A350 is a fantastic aircraft and the deal on the table with Airbus gives us the best possible combination of commercial terms, fuel efficiency, operating cost and customer experience,” he said.
Singapore Airlines Ltd <SINGY> operates the world’s current longest flight, nearly 19 hours from Singapore to New York, using an ultra-long range version of the smaller A350-900.
Airbus Chief Commercial Officer Christian Scherer thanked Qantas for its selection in a statement, while a Boeing spokesman said it was disappointed with the decision but looked forward to continuing its longstanding partnership with the airline.
Rico Merkert, a transport professor at the University of Sydney Business School, said the A350-1000 fit the Qantas brief well and was the safer choice, given Boeing has recently reported problems such as the grounding of the 737 MAX, structural cracks in 737 NGs and a fuselage split in a stress test of its 777-9.
“The A350 just seems to be a much safer bet,” he said. “And safety is at the core of everything that Qantas does including its brand.”
Airbus no longer provides list prices for aircraft, but based on its 2018 price list, the Qantas order could be worth up to $4.4 billion before heavy discounts that are standard for airline customers.
Citi on Friday estimated the planes would cost A$3 billion (1.6 billion pounds) to $3.5 billion, with the investment likely to be phased over three years.
The selection of the A350-1000 will add to growing doubts over Boeing’s plans to produce the 777-8 that it had proposed to Qantas for the mission.
Boeing had already said the entry into service for the plane, a smaller, longer-range version of the 777-9, would be delayed beyond 2022 but has declined to give a new date, saying it would be based on customer demand.
Customers Emirates and Qatar Airways have indicated they could switch orders for the 777-8 to the 777-9.
The 777-9 is due to enter service in 2021, following delays associated with its GE <GE.N> engines.
The Boeing spokesman said on Friday the manufacturer was focused on the development of the 777-9 and after that it would complete development of the 777-8, with the first delivery scheduled a few years after that.
(Reporting by Jamie Freed; Editing by Sam Holmes and Stephen Coates)
An Airbus A350-1000 performs at the 53rd International Paris Air Show at Le Bourget Airport near Paris
FLINT, Mich. (Reuters) – General Motors Co president Mark Reuss said on Wednesday that the automaker is investing about $150 million at its Flint Assembly plant in Michigan, to boost production of heavy duty trucks by another 40,000 vehicles a year.
Reuss announced the investment at the Flint truck assembly plant wearing a United Auto Workers pin.
The Detroit automaker announced in February it was adding 1,000 jobs in Flint to build a new generation of heavy-duty pickup trucks.
GM did not say that the latest investment would add more jobs at the plant, but Reuss said there could be opportunities to add workers as the launch of the automaker’s new trucks progresses.
FILE PHOTO: A Chevrolet 2020 heavy-duty pickup truck is seen at the General Motors Flint Assembly Plant in Flint
GM has been under pressure from U.S. President Donald Trump and lawmakers of both parties to add jobs in the United States after it said last November it would idle a small car assembly plant in Lordstown, Ohio, and had no new products for three other U.S. manufacturing plants.
The Flint investment will include upgrades to the plant’s conveyors and other new tooling, and will be completed in the first half of 2020. GM has invested more than $1.6 billion in the plant since 2013.
Last month, GM said it would invest $24 million to increase truck production at its assembly plant in Fort Wayne, Indiana, which makes Chevrolet Silverado and GMC Sierra models.
FILE PHOTO: The frames of Chevrolet 2019 heavy-duty pickup trucks sit on the assembly line in the paint department at General Motors Flint Assembly Plant
Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000.
GM’s Chevrolet and GMC brands have long trailed Ford Motor Co’s F-series heavy duty trucks in the lucrative segment. The new Chevrolet and GMC heavy duty trucks have been re-engineered to tow heavier trailers, and keep pace in what has become an arms race among the Detroit Three automakers to claim superior torque and towing capability.
(Reporting by Joe White in Detroit and Sanjana Shivdas in Bengaluru; Editing by Sriraj Kalluvila and Nick Zieminski)
FILE PHOTO: A General Motors Co. assembly worker does quality control checks on the paint of Chevrolet 2019 heavy-duty pickup trucks in Flint
