TOMORROWS TRANSPORTATION NEWS TODAY!

Tag: F-16

RTX Pratt & Whitney receives $355 million F100 engine sustainment contract

East Hartford, Connecticut, February 13, 2024, PRNewswire – Pratt & Whitney, an RTX (NYSE: RTX) business, was awarded an F100 engine performance-based logistics (PBL) sustainment contract by South Korea’s Defense Acquisition Program Administration (DAPA). This contract, with a base value of $355 million, is the third consecutive PBL contract Pratt & Whitney and DAPA have signed since 2012, offering on-going maintenance support for the Republic of Korea Air Force’s (ROKAF) F-15 Eagles and F-16 Fighting Falcons.

This contract is the latest initiative in an enduring partnership between Pratt & Whitney, DAPA and ROKAF, and it will support more efficient depot planning and improve overall fleet readiness through long-term material forecasting. Sustainment work began in December of 2023 and will run through the second half of 2027.

Forward-Looking Statements

This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

Copy Translate

Lockheed Martin unveils Slovakia’s first F-16 block 70 aircraft

Greenville, South Carolina, September 7, 2023 – The first F-16 Block 70 aircraft for the Slovak Republic was unveiled at Lockheed Martin’s (NYSE: LMT) facility in Greenville, South Carolina, during a visit from the country’s Minister of Defence, Martin Sklenar.

The Slovak Republic will be the first European country to receive this newest and most capable version of the Fighting Falcon. The F-16 Block 70 aircraft will deliver decades of 21st Century Security capabilities in support of the Slovak Republic’s national security.

This F-16 Block 70 jet is the first of 14 to be delivered to the Slovak Republic.

 

Boeing Breaks Ground on New Maintenance, Repair & Overhaul Facility in Jacksonville

JACKSONVILLE, Fla., Oct. 28, 2021 — Boeing [NYSE: BA] today broke ground to begin construction of a new 370,000 square-foot maintenance, repair and overhaul (MRO) facility located at Cecil Airport that, once complete, will support Boeing’s ability to deliver readiness outcomes for U.S. government customers.

The facility will include eight new hangars, additional work space and offices where Boeing maintainers, engineers and data analysts will support U.S. Navy and Air Force aircraft. The facility’s close proximity to Naval Air Station Jacksonville, Boeing’s Training Systems Center of Excellence in west Jacksonville, and local academic institutions make it a leading location for the development and delivery of innovative product support, underpinned by collaborative research and engineering.

The groundbreaking ceremony celebrates a 25-year lease agreement between Boeing and the Jacksonville Aviation Authority (JAA). Under the agreement, the JAA will construct and lease to Boeing new facilities on approximately 30 acres located on the northeast side of Cecil Airport, near Boeing’s existing MRO site. Construction is anticipated to be completed in 2023.

Since opening its existing MRO facilities at Cecil Airport in 1999, Boeing teammates have maintained, modified and upgraded 1,030 aircraft for the U.S. Navy and Marine Corps, including the F/A-18 A-D Hornet, F/A-18 E/F Super Hornet and EA-18G Growler.  The Boeing team at the site also converts F/A-18 Super Hornets into flight demonstration aircraft for the U.S. Navy’s Blue Angel squadron as well as modifies retired F-16s into the next generation of autonomous aerial targets for the U.S. Air Force.  The facility is also home to a Flight Control Repair Center that provides structural repairs to F/A-18 A-F and EA-18G flight control surfaces.

Lockheed Martin Announces Johnstown Facility To Build Parts For New F-16’s

JOHNSTOWN, Pennsylvania, Sept. 2, 2021 — Lockheed Martin (NYSE: LMT) announced today it would bring new F-16 manufacturing work to its facility in Johnstown, Pennsylvania. The work will generate 80 new jobs in the city and the company plans to lease a new building to accommodate it. 

Wayne Davis, director at Lockheed Martin’s Johnstown site, says Lockheed Martin continues to see demand for new F-16s around the world, requiring development of additional parts manufacturing sites to ensure it can keep up with demand.

F-16 parts to be produced in Johnstown include the aft engine access covers, engine access doors, F-1 fuel tank, and inlet. Upon completion in Johnstown, the parts will be shipped to Greenville, South Carolina, for final assembly and integration into the F-16s on the production line. This is in addition to F-16 component and sub-assembly work already performed at the site today.

Early work in Johnstown will kick off this year, with the bulk of hiring and other significant efforts beginning in 2022. In addition to the F-16 work, the Johnstown facility also provides parts and services for the F-35 and F-22 fighter jets, and the C-130 military transport aircraft.

In addition to the nearly 400 jobs already in place at the site today, Lockheed Martin maintains a strong presence in the Johnstown community, giving more than $42,000 to local organizations and efforts last year.

Bulgaria Sees F-16 Jet Deal With U.S. at $1.2 Billion

  • Defence Minister says $1.2 bln is a reasonable price
  • Final talks to start once Bulgaria gets draft contract
  • Cost will be based on final Bulgarian requirements-U.S. Embassy (Adds defence minister comment, U.S. embassy to Sofia)

SOFIA, June 4 (Reuters) – NATO member Bulgaria expects the United States to offer to sell it eight new F-16 fighter jets for its air force at a discounted price of $1.2 billion, the defence ministry said on Tuesday.

The U.S. State Department approved the possible sale of eight F-16 aircraft and related equipment at an estimated cost of $1.67 billion, a Pentagon agency said on Monday.

Bulgaria, which is also a member of the European Union, is looking to replace its ageing Soviet-made MiG-29s and improve compliance with NATO standards.

A deal for Lockheed Martin’s F-16 Block 70 would be the Balkan country’s biggest military procurement since the fall of Communist rule some 30 years ago.

The defence ministry said the U.S. approval outlined the upper threshold of the cost and it expected a draft contract from Washington within two weeks.

“There is a two-week timeline in which the U.S. government will present to Bulgaria a draft Letter of Offer and Acceptance in which the expected price for the eight jets with a package of necessary related equipment will be within $1.2 billion,” the ministry said in a statement.

The expected price comes above the initial estimate for the deal at 1.8 billion levs ($1 billion) but the Bulgarian parliament has given the defence ministry a green light to go over that.

Defence Minister Krasimir Karakachanov said that the deviation from the initial budget should not be big.

“About 2 billion levs ($1.2 billion) is the upper threshold of a reasonable price,” he told reporters.

The U.S. Embassy in Sofia said that the Departments of State and Defense allow for a margin in all notifications to the U.S. Congress and that the actual cost will be based on Bulgaria’s final requirements.

Final talks on the deal will start once Sofia receives the draft contract. The cost’s reduction would most likely be achieved by scaling down some of the related equipment, local analysts say.

“At that stage…the Bulgarian government may re-scope and re-define the requirements before arriving at the ultimate cost,” the embassy said in a statement. ($1 = 1.7397 leva)

(Reporting by Tsvetelia Tsolova Editing by Keith Weir)

U.S. Air Force Accepts First Boeing KC-46A Pegasus Tanker

SEATTLE, Jan. 10, 2019 – The U.S. Air Force has accepted the first Boeing [NYSE: BA] KC-46A Pegasus tanker aircraft, setting the stage for the aircraft’s delivery to McConnell Air Force Base, in Wichita, Kan., in the coming weeks.

“The KC-46A is a proven, safe, multi-mission aircraft that will transform aerial refueling and mobility operations for decades to come. We look forward to working with the Air Force, and the Navy, during their initial operational test and evaluation of the KC-46, as we further demonstrate the operational capabilities of this next-generation aircraft across refueling, mobility and combat weapons systems missions,” said Leanne Caret, president and CEO of Boeing Defense, Space & Security. “I want to thank the men and women of the Air Force and across the Boeing tanker team who made this happen.”

During extensive flight testing, six KC-46 completed more than 3,800 flight hours and offloaded more than four million pounds of fuel to A-10, B-52, C-17, KC-10, KC-135, KC-46, F-15E, F-16 and F/A-18 aircraft. The Pegasus has been rigorously tested throughout all aspects of the refueling envelope and in all conditions, including day, night and covert.

With the signing of what’s known as the DD250 paperwork, the delivery activities can proceed. McConnell Air Force Base will receive the first four KC-46 aircraft, all of which are ready for delivery, with four subsequent aircraft destined for Oklahoma’s Altus Air Force Base, beginning as early as next month.

Boeing is on contract for 52 of an expected 179 tankers for the Air Force. Beyond the first aircraft that was accepted today, nine aircraft are undergoing customer acceptance testing with the remaining aircraft of the contracted amount in production.

“This is an exciting and historic day for the Air Force and Boeing, as we hand over the first of many KC-46 tankers,” said Boeing Chairman, President and CEO Dennis Muilenburg. “I’m proud of the dedication and commitment by our enterprise-wide team, and we’re honored to provide this valuable and capable aircraft to our customer. We look forward to continuing to build and support the KC-46 for the Air Force—and other customers across the globe—for decades to come.”

The KC-46, derived from Boeing’s commercial 767 airframe, is built in Boeing’s Everett, Wash., facility.

For more information on Defense, Space & Security, visit www.boeing.com. Follow us on Twitter: @BoeingDefense and @BoeingSpace.

Story and image from http://www.boeing.com

Lockheed Martin To Build Wings For F-16 Jet In India

By Neha Dasgupta

NEW DELHI (Reuters) – Lockheed Martin will build wings for its F-16 combat plane in India with its local partner, Tata Advanced Systems Limited, an executive at the U.S. company said on Tuesday.

Lockheed is bidding for a contract – estimated at more than $15 billion – to supply the Indian air force with 114 combat planes, which must be all manufactured locally under Prime Minister Narendra Modi’s flagship Make in India programme.

However, Vivek Lall, vice president of strategy and business development at Lockheed, said the proposed Indian production of the F-16 wings would not be contingent upon the company winning the order for the planes.

“Producing F-16 wings in India will strengthen Lockheed Martin’s strategic partnership with Tata and support Make in India,” the company said in a statement.

Modi has been pushing for local manufacturing that will provide jobs and also end the military’s dependence on imports.

Lockheed’s announcement came just days ahead of top level talks between the United States and India aimed at expanding defence ties.

U.S. Secretary of State Mike Pompeo and Defense Secretary Jim Mattis will meet with Indian Foreign Minister Sushma Swaraj and Defence Minister Nirmala Sitharaman.

Boeing has pitched its F/A-18 Super Hornet for the Indian contract as well as Sweden’s Saab with its Gripen fighter. France’s Dassault Systemes SE’s Rafale, the Eurofighter Typhoon and Russian aircraft are also in the fray.

Lall said Lockheed had offered to make India its sole F-16 production facility that would supply the Indian military but also other countries. “If India buys the F-16 then it becomes the centre of manufacturing for the global market,” he said.

Lall said the company planned to begin production of the F-16 wings in the southern Indian city of Hyderabad from 2020. He said these were being produced at a facility in Israel and would not impact any jobs in the United States.

The Israeli centre will continue to be involved in other production, he said. “All F-16 wings globally are to be built in the Hyderabad facility,” he said.

(Reporting by Neha Dasgupta; Writing by Sanjeev Miglani; Editing by Susan Fenton and Jane Merriman)