Tag: fuselage (Page 1 of 2)

Silk Way West takes delivery of first Boeing 777 freighter

October 4, 2023 / WIL BALDWIN

Baku, Azerbaijan, October 3, 2023, PRNewswire – Silk Way West Airlines’ first Boeing (NYSE: BA) 777 Freighter arrived at Heydar Aliyev International Airport today as the airline becomes the newest operator of the world’s largest, longest range and most capable twin-engine freighter. The 777 Freighter will enable Silk Way West to increase its capacity to meet growing cargo demand around the globe.

Designed to integrate smoothly with existing cargo operations, the 777 Freighter will provide Azerbaijan-based Silk Way West with enhanced efficiency and operational flexibility. With a range of 9,200 kilometers, the 777 Freighter can carry a maximum structural payload of 107,000 kilograms, allowing operators to make fewer stops and reduce landing fees on long-haul routes. The airplane’s large fuselage diameter allows carriers to transport tall and outsized cargo loads on 3-meter-tall pallets, and its main deck side cargo door is 3.72 meters wide, allowing convenient loading of taller and wider cargo.

The 777 Freighter is Boeing’s top-selling freighter of all time. Customers from around the world have ordered 319 777 Freighters since the program began in 2005. As the market leader in cargo airplanes, Boeing provides more than 90% of the worldwide dedicated freighter capacity, including new-production and converted airplanes.

Airbus opens new A321XLR equipment installation hangar

August 31, 2023 / WIL BALDWIN

Hamburg, Germany, August 30, 2023 – Airbus (OTC: EADSY) is advancing its industrial system and expanding ramp-up capacity with a new automated A321XLR equipping hangar, officially opened today by Hamburg’s First Mayor Peter Tschentscher and German Aerospace Coordinator Anna Christmann. With this, Airbus continues its modernisation and digitalisation of its industrial system and expands its capacity for the rate ramp-up in the A320 programme to 75 in 2026.

Hamburg, 30 August 2023 – Airbus is advancing its industrial system and expanding ramp-up capacity with a new automated A321XLR equipping hangar, officially opened today by Hamburg’s First Mayor Peter Tschentscher and German Aerospace Coordinator Anna Christmann. With this, Airbus continues its modernisation and digitalisation of its industrial system and expands its capacity for the rate ramp-up in the A320 programme to 75 in 2026.

“Airbus’ Hamburg site plays a significant role in the development and production of the A321XLR. With our new, state-of-the-art equipment installation hangar, we are now expanding our capacity to manufacture A321 fuselages and making an important contribution to supporting our ramp up. At the same time we are reaffirming the importance of Hamburg for Airbus,” said André Walter, Head of Airbus Commercial Aircraft Production in Germany. “The design of the building reflects the latest standards in production and sustainability.”

Dr Peter Tschentscher, First Mayor of the Free and Hanseatic City of Hamburg: “Hamburg is the central location for Airbus’ single-aisle development and production. With the A321XLR, the new flagship of the A320 Family will be assembled at the Finkenwerder site, setting new standards in terms of sustainability, efficiency and range. The start of production in the new equipment installation hangar is an important project for Hamburg as the world’s third largest civil aviation center.”

“This investment in the A321XLR equipment installation hangar at the Airbus Hamburg site is an important milestone towards transitioning aviation to climate neutrality. This transformation is the key to making Germany a future-oriented and competitive aerospace location,” said Anna Christmann, the Federal Government Coordinator of German Aerospace Policy. “I am delighted that Airbus is positioning itself as a trailblazer in sustainable aviation and that we are pulling together to accelerate progress toward climate-neutral aviation even further.”

In the new equipment installation hangar, with 9,600 m² of production space, designated H259, all the components of the rear fuselages of the A321XLR aircraft – also built in Hamburg – will be installed and mounted. The hangar is equipped with a full range of state-of-the-art technologies for operations and manufacturing, such as automated logistics, fully digital systems, and test stations that can output the status of each fuselage section (both in terms of logistics and resources) at any time. The almost 24-metre-long fuselage sections are equipped with all electrical and mechanical systems, as well as other elements such as windows, floor panels or external antennas, on an automated ‘pulse line’ consisting of eight stations. Each fuselage section is extensively tested directly after the installation of the systems. The fuselage sections are then transferred to the final assembly line in Hamburg.

The stations in the new hangar were planned in close consultation with the employees to create both an efficient production flow and an ergonomically optimised and modern working environment. In addition, the interior design also focused on ensuring optimal conditions for cooperation between the employees in production and the supporting functions.

The structure was planned and built sustainably. A 3,000 m² photovoltaic system on the roof supplies the hangar with electricity, and surpluses are used to power the site. The office block on the south side offers an excellent level of insulation thanks to extensive insulation of the ceiling and walls. A fully automatic control system for heating, ventilation and lighting complements the measures.

First Qantas Group A220 on assembly line as Australians invited to help name new fleet

July 15, 2023 / WIL BALDWIN

The Qantas Group’s (OTC: QABSY) first Airbus A220 aircraft has started construction, marking a key milestone for the Group as its fleet renewal program ramps up.

The aircraft’s major airframe components, including the centre and rear fuselage, are coming together at Airbus’ production facility in Mirabel, Canada, with the first of 29 aircraft expected to arrive in Australia before the end of the year. As the first A220 to be operated in Australia, the aircraft will undergo regulatory approvals, airport readiness and training activities before it joins the QantasLink fleet in early 2024. QantasLink has also commenced training its pilots to operate the new aircraft.

The next generation A220s will gradually replace QantasLink’s Boeing 717 fleet which operate routes across Australia.

The first QantasLink A220 will operate flights between Melbourne and Canberra, with subsequent aircraft to be deployed to other parts of the regional and domestic network. With double the range of the 717, the A220 is also expected to open up new domestic and short-haul international routes as more aircraft enter the fleet.

With production now in full swing, the Qantas Group is calling on Australians to help name its fleet of new A220s, based around the theme ‘native wildlife’.

From today, Australians can nominate up to six names via a dedicated page on qantas.com. A shortlist will then be released so the public can vote for their favourites before the final names are revealed.

Qantas ran a similar competition to name its Boeing 787 Dreamliner fleet with iconic Australian names in 2017, with more than 10,000 submissions received.

QantasLink CEO John Gissing said the production milestone marked an important step in the renewal of the airline’s fleet.

Airbus inaugurates new Toulouse A320 Family final assembly line

July 10, 2023 / WIL BALDWIN

Toulouse, France, July 10, 2023 – Airbus (OTC: EADSY) has inaugurated its new A320 Family final assembly line (FAL) in Toulouse during a ceremony attended by French Minister of Economy & Finance Bruno Le Maire, French Transport Minister Clement Beaune, Minister of State for Industry Roland Lescure, and Minister of State for Territorial Collectivities and Rural Affairs Dominique Faure, as well as hundreds of Airbus employees.

A variety of innovations feature prominently in this latest A320 Family final assembly line, with the aim of maximising product quality, efficiency, as well as establishing new standards for health, safety and sustainability. These innovations include digital production control using tablets and smartphones to reduce paper consumption, automated logistics for parts distribution and light-weight robots for joining sections.

Installed in the former A380 “Jean-Luc Lagardère” assembly building, the new FAL started initial operations at the end of 2022 with the delivery of the first fuselage sections. The roll-out of the first aircraft fully assembled in this facility – an A321 – is expected to take place by the end of this year. The industrial site will progressively ramp up operations between now and 2025, directly employing around 700 workers.

Airbus Firms Up Order With CMA CGM Group for Four A350F Freighters

December 20, 2021 / WIL BALDWIN

Toulouse, France December 20, 2021 – Airbus (OTC: EADSY) has firmed up an order for the purchase of four A350F freighter aircraft with the CMA CGM Group, a world leader in shipping and logistics. This order will bring CMA CGM’s total Airbus fleet to nine aircraft, including four A330-200F and one A330-200 to be converted into a freighter.

The A350F is based on the passenger A350 jet. The aircraft features a large main deck cargo door and a fuselage length optimised for cargo operations. Over 70% of the airframe is made of advanced materials resulting in a 30t lighter take-off weight, generating an at least 20% lower fuel burn over its current closest competitor. With a 109t payload capability, the A350F will serve all cargo markets (Express, general cargo, medical, special) and is in the large freighter category the only new generation freighter aircraft ready for the enhanced 2027 ICAO CO₂ emissions standards.

Embraer Displays Most Efficient Single Aisle Commercial Jet at Selangor Aviation Show

November 26, 2021 / WIL BALDWIN

Kuala Lumpur, Malaysia – Making its appearance at the first edition of the Selangor Aviation Show is Embraer’s E195-E2, the world’s most efficient and sustainable single-aisle jet. Showcasing a stunning “TechLion” livery that covers the entire aircraft’s fuselage, the E195-E2’s appearance at the Selangor Aviation Show comes after the aircraft’s presence at the Dubai Air Show earlier in the month. Featuring Embraer’s two by two passenger seating, the commercial jet sits up to 146 passengers.

In its 2021 market outlook, Embraer foresees a demand of 60 new commercial aircraft under 150 seats in Malaysia over the next 10 years. Driving this demand is the opportunity for aircraft under 150 seats to complement larger aircraft prevalent in the country and enhance the viability of establishing new routes or increasing the frequency of existing routes. This includes the boosting of direct connectivity within Peninsula Malaysia, as well as connectivity between cities in Peninsula Malaysia to East Malaysia (Sabah and Sarawak).

With a range of 2600nm (~5.5 hours of flight time), the E195-E2 is the largest of the three aircraft in the E-Jets E2 family. It entered into service at the end of 2019 following type certification from three major world regulatory authorities – the FAA (U.S. Federal Aviation Administration), EASA (European Aviation Safety Agency) and ANAC (the Brazilian Civil Aviation Agency). It is currently operated by KLM, which has 53 Embraer E-Jets in its fleet, Azul which operates 55 E-Jets and flies to more than 100 destinations in Brazil, as well as airlines in Switzerland, Spain, Belarus and Nigeria.

Embraer is the world’s leading manufacturer of commercial jets that seat up to 150 passengers. The commercial aircraft manufactured by Embraer are being operated by airlines in more than 130 airlines across over 70 countries, including airlines in the US (all the major carriers), British Airways, KLM, Japan Airlines and airlines in China.

Embraer Modular Airplane Concept Receives International Design Award

April 7, 2021 / WIL BALDWIN

Évora, Portugal, April 6, 2021 – The Embraer (NYSE: ERJ) FLEXCRAFT, a modular and remotely piloted aircraft concept, which allows quick reconfiguration of the cabin for multiple missions, won the International Design Awards (IDA) in the Transport Design category.

With the ability to land and take off on short lanes and use alternative energy sources, the concept seeks to foster ideas for transforming the future of air mobility, combining the human, technological, social and economic perspectives in a sustainable manner. IDA highlighted the passenger experience through the flexibility of fuselage design and new technologies.

The futuristic project was the result of a Portuguese consortium led by Sociedade de Engenharia e Transformação, SA (SET.SA) that brought together Embraer Portugal, Instituto Superior Técnico (IST), Almadesign, Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI), plus the support from Embraer SA (Brazil). The initiative was funded by the Portugal 2020 program, under the Operational Program Competitiveness and Internationalization through the European Regional Development Fund.

The scientific research aimed to raise the critical technologies of this concept in an integrated way, such as configuration, flexibility solutions and production and material processes. Through the FLEXCRAFT project, it was possible to evaluate the development of new production processes, eco-efficient technologies, and the integration of new materials, among other research fronts.

Boeing Begins T-7A Red Hawk Advanced Trainer Production

February 23, 2021 / WIL BALDWIN

ST. LOUIS, Feb. 23, 2021 — A new era in aircraft design and build has begun as the first U.S. portion of the T-7A Red Hawk advanced trainer has officially entered the Boeing [NYSE: BA] jet’s state-of-the-art production line.

The training jet, designated the eT-7A Red Hawk by the U.S. Air Force because of its digital heritage, was fully designed using 3D model-based definition and data management systems developed at Boeing during the last two decades. The T-7A Red Hawk employed the digital engineering and design of the Boeing T-X aircraft that went from firm concept to first flight in just 36 months.

The Advanced Pilot Training System also incorporates leading-edge ground-based live and virtual simulators to give students and instructors a “real as it gets” experience.

In September 2018, the U.S. Air Force awarded Boeing a $9.2 billion contract to supply 351 advanced trainer aircraft and 46 associated ground-based training simulators. Saab is teamed with Boeing on the trainer and provides the aft fuselage of the jet.

Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As a top U.S. exporter, the company supports commercial and government customers in more than 150 countries and leverages the talents of a global supplier base. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.

Aeroflot Takes Delivery of its First A350-900

February 28, 2020 / WIL BALDWIN

Aeroflot, the Russian flag carrier and member of the SkyTeam alliance, has taken delivery of its first A350-900, becoming the launch operator of the latest-generation widebody aircraft in Eastern Europe and CIS. Aeroflot’s A350-900 features a distinctive new livery embracing its almost 100-year heritage. Aeroflot has a total of 22 A350-900 aircraft on order and operates an Airbus fleet of 126 aircraft (107 A320 Family and 19 A330 Family aircraft).

Aeroflot’s A350-900 features a brand new elegant cabin design, offering unrivalled passenger comfort. The aircraft has a spacious three-class cabin layout with 316 seats: 28 private Business Class suites with full-flat seats, 24 Comfort Class with extra legroom and 264 Economy Class. In addition, the latest-generation Panasonic eX3 in-flight entertainment system, HD screens and Wi-Fi connectivity will ensure enhanced experience for all passengers on long-haul flights. Aeroflot will operate its A350-900 from Moscow to a number of destinations including London, Dubai, New York, Miami, Osaka and Beijing.

The A350 XWB offers by design unrivalled operational flexibility and efficiency for all market segments – up to ultra-long haul (9,700 nm). Its Airspace by Airbus cabin is the quietest of any twin-aisle aircraft and offers passengers and crews the most modern in-flight flying experience. The aircraft features the latest aerodynamic design, a carbon fibre fuselage and wings, plus new fuel-efficient Rolls-Royce Trent XWB engines. Together, these latest technologies result in 25% lower operating costs, as well as 25% reduction in fuel burn and CO₂ emissions compared with previous-generation competing aircraft – demonstrating Airbus’ commitment to minimise its environmental footprint while remaining at the cutting edge of air travel.

Airliner Skids, Breaks Open in Istanbul; 3 Dead, 179 Injured

February 5, 2020 / WIL BALDWIN

ISTANBUL (AP) — A Turkish airliner skidded off a runway, crashed into a ditch and broke apart while landing in bad weather in Istanbul Wednesday, killing three people and injuring dozens more. Passengers had to scramble through the split fuselage to escape.

The aircraft, operated by low-cost carrier Pegasus Airlines, was arriving at Istanbul’s Sabiha Gokcen airport from the western Turkish city of Izmir with 183 passengers and crew on board when it had what the Transportation Ministry described as a “rough landing.”

Istanbul Gov. Ali Yerlikaya said the plane failed to “hold onto the runway” and skidded some 50-60 meters (yards) before it dropped into the ditch from a height of about 30 meters (98 feet.)

“We are deeply saddened … (But) we are very happy that we escaped a greater accident,” Yerlikaya said, adding that the plane could have burst into flames.

Health Minister Fahrettin Koca reported early Thursday that three people had died and 179 required care at multiple hospitals.

Emergency workers, assisted by an excavator, recovered one body from beneath the wreckage before the rescue mission ended.

The airport was shut down after the incident, which occurred at around 6:30 p.m. local time (1530 GMT), and flights were diverted to Istanbul’s main airport.

Click the link for the full story! https://apnews.com/f7a089322c96a26dfde4bb5c0ac30b1f

Archives