February 18, 2022 – Alstom (OTC: ALSMY) Chinese joint venture, Shentong Bombardier (Shanghai) Rail Transit Vehicle Maintenance Co., Ltd., has been awarded a contract from Shanghai Shentong Metro Group Co., Ltd. (Shanghai Metro) to provide whole lifecycle maintenance service for 204 Movia metro cars (34 trains) on Shanghai’s Line 12 phase 2 and phase 3 project. The total contract is valued at approximately €43.6 million (330 million CNY excl. VAT).
Under the contract, SHBRT will adopt the condition-based maintenance regime by deploying the advanced maintenance tools, including Alstom’s Orbita advanced train monitoring system, Automatic Vehicle Inspection System, etc., to improve the safety, reliability, availability and efficiency of Shanghai’s Line 12 fleet. The scope of the contract includes preventive maintenance, corrective maintenance, balanced overhauls, safety inspections, train cleaning and train escort services for 204 metro cars. The project is expected to be completed in November 2027.
Boeing released the following statement in regards to United Airlines Flight 328 which suffered an engine failure upon takeoff from Denver International Airport:
“Boeing is actively monitoring recent events related to United Airlines Flight 328. While the NTSB investigation is ongoing, we recommended suspending operations of the 69 in-service and 59 in-storage 777’s powered by Pratt & Whitney 4000-112 engines until the FAA identifies the appropriate inspection protocol.
Boeing supports the decision yesterday by the Japan Civil Aviation Bureau, and the FAA’s action today to suspend operations of 777 aircraft powered by Pratt & Whitney 4000-112 engines. We are working with these regulators as they take actions while these planes are on the ground and further inspections are conducted by Pratt & Whitney.
Teams at Stennis Space Center prepare for core stage hot-fire testing ahead of Artemis I lunar mission
Boeing [NYSE: BA] today delivered the core stage of NASA’s first Space Launch System (SLS) deep space exploration rocket, moving it out of the NASA Michoud Assembly Facility in New Orleans to the agency’s Pegasus barge.
The event marks the first time a completed rocket stage has shipped out of Michoud since the end of the Apollo program. SLS Core Stage 1 is the largest single rocket stage ever built by NASA and its industry partners.
The rollout follows several weeks of final testing and check-outs after NASA’s declaration of “core stage complete” during a December 9 Artemis Day celebration at Michoud.
NASA will transport the SLS core stage to its Stennis Space Center in Bay St. Louis, Mississippi, in the next few days for “Green Run” hot-fire engine tests later this year. After inspection and refurbishing for launch, the stage moves to Kennedy Space Center in Florida. At Kennedy, the core stage will be integrated with the Interim Cryogenic Upper Stage (ICPS) and NASA’s Orion spacecraft for the uncrewed Artemis I mission around the moon – the first launch of a human-rated spacecraft to the Moon since Apollo 17 in 1972.
“The Boeing SLS team has worked shoulder-to-shoulder with NASA and our supplier partners to face multiple challenges with ingenuity and perseverance, while keeping safety and quality at the forefront,” said John Shannon, Boeing SLS vice president and program manager.
SLS is the world’s most powerful rocket, evolvable and built to carry astronauts and cargo farther and faster than any rocket in history. Its unmatched capabilities will deliver human-rated spacecraft, habitats and science missions to the moon, Mars and beyond as part of NASA’s Artemis program.
“We are applying what we’ve learned from development of the first core stage to accelerate work on core stages 2 and 3, already in production at Michoud, as well as the Exploration Upper Stage that will power NASA’s most ambitious Artemis missions,” said Shannon.
Space Launch System Core stage 1 rollout from Michoud Assembly Facility to NASA’s Pegasus barge; for Green Run test. MSF20-0002 Series. Leanne Caret_President and CEO of Boeing Defense, Space & Security.
WASHINGTON (Reuters) – The U.S. Federal Aviation Administration late on Friday said it would require operators of some Boeing 737 NG jetliners to conduct inspections for structural cracks and make repairs as needed following the discovery of cracks on a small number of planes.
The FAA said Boeing notified it of the issue “after it discovered the cracks while conducting modifications on a heavily used aircraft.” Subsequent inspections “uncovered similar cracks in a small number of additional planes.” Boeing said on Friday it has been in contact with 737 NG operators about a cracking issue, but added that “no in-service issues have been reported.”
Neither the FAA nor Boeing immediately said how many planes were impacted by the required inspections.
The 737 NG, or Next Generation, was introduced in 1997 and is the third generation version of the best-selling Boeing airplane. The 737 MAX, which was grounded in March after two fatal crashes in five months, is not affected by this issue, Boeing said.
The FAA said it would ask operators of the NG to “report their findings to the agency immediately” after completing inspections. Boeing said “over the coming days, we will work closely with our customers to implement a recommended inspection plan for certain airplanes in the fleet.”
KOMO News reported on Friday the issue involved cracked “pickle forks” in some 737 NG jets. The pickle fork attaches the plane’s fuselage, or body, to the wing structure and manages forces. A failure of the part in flight could pose a serious risk. KOMO said workers found a severely cracked pickle fork on a Boeing 737NG earlier this month.
(Reporting by David Shepardson; Editing by Leslie Adler and Sandra Maler)
FRANKFURT (Reuters) – Electric carmaker Tesla <TSLA> is scouting out locations for a possible factory in the German state of North Rhine-Westphalia (NRW), Germany’s most populous state, daily Rheinische Post reported on Sunday, citing people familiar with the matter.
First inspections have taken place, the paper said.
Tesla spokespeople in Europe were not immediately available for comment.
Tesla Chief Executive Elon Musk said in a tweet in April that the company was “considering” building a factory in Germany.
Last year, Musk said Germany was a leading choice in Europe to build a Gigafactory, adding “the German-French border makes sense, near the Benelux countries”.
NRW, Germany’s most populous state, shares borders with the Netherlands and Belgium.
Tesla is also looking at the German state of Lower Saxony, which shares a border with the Netherlands, its Economy Minister Bernd Althusmann said earlier this week.
(Reporting by Christoph Steitz; Editing by Frances Kerry)
The Italian manufacturer will provide ENAV – the Italian air navigation service provider – with the maintenance of the four P.180s used for flight inspection activities at national airports.
Piaggio Aerospace has been awarded a contract for the maintenance of the P.180s owned by ENAV, the company that manages civil air traffic in Italy. The agreement, with an estimated duration of approximately 7 years, is worth 12.6 million euro and will guarantee integrated logistic support for ENAV’s fleet of four P.180 Avanti II.
“The agreement signed represents a further step forward in the turn-around process of Piaggio Aerospace”, commented Vincenzo Nicastro, Extraordinary Commissioner of Piaggio Aerospace. “While strengthening the backlog of the Genoa factory-owned service centre, it also confirms the unique expertise of the company in the airframe MRO domain, consolidated throughout decades of activities”.
The ENAV P.180s perform an average of 1,800 flight hours per year. Thanks to their special equipment, they carry out regular measurements and calibration of airport navaids (Radar, VOR, DME, VDF, ILS etc.) in order to guarantee their continuous operational accuracy, essential for the safety of air navigation.
A similarly equipped P.180 will be showcased at MAKS ’19, the international air show that will be held at Zhukovsky International Airport (Moscow) from August 27 to September 1. A delegation of Piaggio Aerospace will also be present at the air show.
Startup manages maintenance, inspection and alteration services for global manufacturers and operators of commercial unmanned aircraft systems
Access to safe, reliable maintenance will support commercial operations and urban mobility efforts
CHICAGO, June 4, 2019 /PRNewswire/ — Boeing [NYSE: BA] today announced its investment in Robotic Skies, a services provider that connects manufacturers and operators of commercial unmanned aircraft systems (UAS) with a global network of more than 170 civil aviation authority-certified repair stations.
“With safety as a cornerstone, we are shaping a robust operational ecosystem for on-demand mobility that supports the future of aircraft, air vehicles and autonomous systems,” said Brian Schettler, managing director for Boeing HorizonX Ventures.
The investment is part of Boeing’s disciplined, long-term strategy of entering into value-added partnerships that enhance and accelerate growth and deliver key differentiators for customers.
“Unmanned and autonomous commercial aircraft operations are increasingly mirroring those in manned aviation, including the need for quality maintenance provided by certified technicians,” said Brad Hayden, founder and CEO of Robotic Skies. “This latest investment will allow us to continue to grow our global footprint and expand operational capabilities to support customers.”
Boeing HorizonX Ventures led this funding round with participation from Thayer Ventures, Sun Mountain Capital and KickStart Seed Fund. The investment builds on a previously-announced collaboration with Robotic Skies, Boeing Global Services and its subsidiaries Aviall and Jeppesen to provide enhanced commercial UAS services.
Boeing is the world’s largest aerospace company and leading provider of commercial airplanes, defense, space and security systems, and global services. As the top U.S. exporter, the company supports commercial and government customers in more than 150 countries. Boeing employs more than 150,000 people worldwide and leverages the talents of a global supplier base. Building on a legacy of aerospace leadership, Boeing continues to lead in technology and innovation, deliver for its customers and invest in its people and future growth.
Robotic Skies is the only global network of certified UAS maintenance centers. It offers comprehensive turnkey field service programs designed to keep UAS flying safely, efficiently and affordably around the world. Founded in 2014, Robotic Skies has more than 170 certified repair stations across more than 40 countries, providing MRO and support services for commercial UAS. Each service center in the network possesses the aviation expertise and factory training to ensure the mission readiness of these aircraft. For more information about Robotic Skies, visit: http://www.roboticskies.com
April 2 (Reuters) – The U.S. Air Force said on Tuesday that it again stopped accepting deliveries of Boeing Co’s KC-46 tanker aircraft after finding foreign object debris in the planes.
Back in February, deliveries of the aircraft were halted by the U.S. Air Force because of the same issue in one of the aircraft. Deliveries resumed in March after Boeing ramped up the inspection process.
“Our inspectors identified additional foreign object debris and areas where Boeing did not meet quality standards,” U.S. Air Force spokesperson Captain Hope Cronin said.
The decision to halt acceptance of the planes was made on March 23, the Air Force said, adding that the problem was not with the aircraft itself but with the process in place for building it.
“We are currently conducting additional company and customer inspections of the jets and have implemented preventative action plans,” Boeing said in a statement.
“We have also incorporated additional training, more rigorous clean-as-you-go practices and FOD awareness days across the company to stress the importance and urgency of this issue.”
(Reporting by Ankit Ajmera in Bengaluru; Editing by Maju Samuel)
