TOMORROWS TRANSPORTATION NEWS TODAY!

Tag: intermediate

Leonardo AW169 capabilities to grow with increased Gross Weight and 11 seat configuration

Rome, Italy, October 30, 2023 – The Leonardo S.p.A. (OTC: FINMY) AW169 light intermediate twin engine helicopter’s operational capabilities and range of options will grow further with the launch of a 5,100 kg (11,243 lb) IGW kit and an 11-seater configuration fully compliant with the IOGP (International Association of Oil & Gas Producers) Report 690. Both will be made available for the aircraft version with skid landing gear.

Compared to the standard 4,800 kg (10582 lb) Maximum Take-off Weight, the extra 300 kg (661 lb) available with the 5,100 kg IGW kit allows the embarkation of three more passengers or the addition of fuel for approximately one hour of operations. Existing operators of the type’s version with skids will be able to retrofit the 5,100 kg IGW kit to enhance their aircraft’s capabilities.

As an additional option, the 11-seater configuration, fully compliant with the IOGP Report 690 (Offshore Helicopter Recommended Practices), will introduce a new modular fuel tank system and two additional Type IV emergency exits in the cabin, increasing the total number from four to six. The 11 seats configuration will be available for the skid-fitted version in combination with the 5,100 kg IGW kit. This solution will allow the type to satisfy even more demanding offshore transport requirements in terms of payload, range, and compliance with IOGP latest standards.

This configuration will allow a radius of action of up to 75 nm with 11 passengers, therefore offering capabilities typically achievable with types with a MTOW exceeding 5.5 tons (intermediate class) at a light intermediate class cost of operations as well as granting latest safety standards compared with legacy helicopters. It will also deliver greater sustainability versus ageing types in the relevant weight category thanks to a more efficient powerplant, advanced navigation, modern support and maintenance approach, among other solutions. The Certification of the IGW increase is expected in 2024 while the 11-seater configuration with new modular fuel tank is planned for certification in 2026.

These latest operational capabilities will add to the EASA (European Aviation Safety Agency) certifications of the skid undercarriage and unique IFR, single pilot, Advanced Search and Rescue (SAR) Modes, both achieved in late 2022. With the skid configuration certification, the AW169 became the only modern CS29-certified aircraft able to offer all undercarriage solutions, further demonstrating the versatility by design of the type. The AW169 is also the only helicopter in its weight category that features Advanced SAR Modes. The performance increase packages previously developed had already enhanced engine performance and capabilities, transmission ratings and available payload through engine software updates and aircraft aerodynamics modifications, making the type the helicopter with the best power-to-weight ratio in its class.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

 

 

Hola

Leonardo Celebrates 20th Anniversary of AW139 Helicopter First Flight

Leonardo celebrates today the 20th anniversary of the AW139 helicopter’s maiden flight. The first aircraft took to the skies from the Company’s facility in Cascina Costa di Samarate, Italy on 3 February 2001. The helicopter flew for 45 minutes checking initial airworthiness tests, hovering, lateral and forward flight, handling qualities and subsystems. This soon confirmed the impressive characteristics and the smoothness of the new model and its performance and capabilities were to become a new market benchmark, making it the most important helicopter programme in the last two decades at an international level. 

The AW139 intermediate-twin engine 7 tonne boasts orders of almost 1,200 units from more than 280 customers in over 70 countries on all continents. The aircraft has shown extraordinary levels of reliability and operational capabilities with more than 3 million flight hours recorded since the first delivery took place at the beginning of 2004. Data of use testifies the extreme versatility of the AW139 which satisfies any market need: approximately half the world’s fleet for public utility tasks such as search and rescue and air ambulance, law enforcement, fire-fighting, disaster relief and military duties. The rest account for a leading position in its class in the offshore transport sector, plus VIP, institutional and corporate transport as well as other civil missions. The AW139 fleet has a global presence: around 30% in Europe, almost as much in Asia and Australasia, 15% in the Americas, followed by the Middle East. The international success of the AW139 is so important that to meet market demands the helicopter is produced on different assembly lines both in Italy, in the Vergiate plant, and in the United States in Philadelphia which has delivered around 30% of all units to date. The US Air Force will soon introduce the AW139-based Boeing MH-139 to replace the UH-1N fleet.

The AW139 has grown significantly over the years, adapting to the changing needs of customers. The maximum take-off weight increased from 6.4 to 7 tons. Almost 1,000 mission kits and equipment have been certified. With advanced protection systems against icing, the AW139 can fly in all-weather conditions. This model is also the only one in the world capable of continuing to fly for over 60 minutes without oil in the transmission, twice as much as the 30 minutes set by certification authorities. In 2020 new distinguished features for the avionics suite were introduced including synthetic vision, Enhanced Ground Proximity Warning System with offshore modes, improved 2D maps and wireless data loading, increasing crew situational awareness and reducing workload for operations at night or in marginal weather. Despite the experience and maturity achieved in almost 17 years of operational activity, the AW139 remains a young and modern programme, destined to play a leading role into the future. The AW139 truly embeds all areas of excellence and leadership in its field at Leonardo such as transmissions and dynamics, system integration and customization, best in class performance, mission versatility, latest safety standards and a comprehensive range of increasingly localised customer support and training services and solutions, developed and grown to allow customers worldwide to maximise the capabilities of the type.  

The aircraft of choice in its class against which all existing and newcomers are measured, the AW139 also represents a turning point in the rotary-wing sector through the introductory concept of the Leonardo “helicopter family”. The AW139 is, in fact, the forefather of a helicopter family comprising of the smaller and lighter AW169 and the larger and heavier AW189. Models, the only case in the world, that share the same design philosophy, the same high performance, the same flight characteristics and the same certification standards, as well as the same approach to maintenance and training. A concept that allows operators with large diversified fleets, with models ranging from 4 to 9 tons of weight, to create significant synergies in crew training, flight operations, maintenance and logistics support.

German Carmakers to Resume Production as Lockdowns Ease

FILE PHOTO: VW hosts photo workshop at Zwickau plant

FRANKFURT (Reuters) – German carmakers including Volkswagen <VOW.DE> and Mercedes-Benz <DAI.DE> will restart production at some German factories next week after the country eased restrictions designed to contain the coronavirus outbreak.

Chancellor Angela Merkel on Wednesday said that Germany has achieved a “fragile intermediate success” in its the fight against the coronavirus and that its emergence from lockdown would begin with the partial reopening of shops next week and schools from May 4.

Unlike Italy and Spain, Germany never banned car production, though factories came to a standstill after authorities restricted the movement of people and ordered the closure of car dealerships, hitting demand.

Volkswagen said it will start producing cars for its core brand in Zwickau, Germany, and in Bratislava, Slovakia, on April 20.

Plants in Russia, Spain, Portugal and the United States will ramp up production from April 27 onwards, joined by factories in South Africa, Argentina, Brazil and Mexico in May.

“With the decisions by the federal and state governments in Germany and the loosening of restrictions in other European states, conditions have been established for the gradual resumption of production,” Ralf Brandstaetter, Chief Operating Officer of the Volkswagen brand, said in a statement.

The carmaker has retooled production to ensure that workers keep 1.5 metres apart. Other measures include the staggering of shifts and lunch breaks, plus steps to change worker interaction in VW’s supply chain.

Bernd Osterloh, Chairman of the company’s Works Council, said: “In the light of the pandemic, we need to adapt our routines. One answer is our new agreement on health protection. With about 100 measures, we are keeping the risk of infection at Volkswagen as low as possible.”

In China, where a Volkswagen has already implemented health measures, 32 of the 33 plants have resumed production and no coronavirus infections among employees have been reported.

Mercedes-Benz parent Daimler said that its plants in Hamburg, Berlin and Untertuerkheim will resume production next week. Its Berlin plant makes engine-management systems for vehicles sold in China.

Production will initially start in a one-shift system, Daimler said, with plants in Sindelfingen and Bremen also making preparations to ramp up production.

(Reporting by Edward Taylor and Jan Schwartz; Editing by David Goodman)

Volkswagen facility in Zwickau, Germany