Toulouse, France, January 2, 2023 – Airbus regrets to confirm that an A350-900 operated by Japan Airlines was involved in an accident during flight JAL516 from Sapporo New Chitose Airport to Haneda International Airport shortly after 17:47 (local time) on 02 January 2024. All 367 passengers and 12 crew members on-board evacuated the aircraft.
The A350 collided with a DHC-8 aircraft at landing in Haneda. The Japanese authorities have since confirmed that sadly five of the six people on board the DHC-8 did not survive. The exact circumstances of the event are still unknown. The aircraft involved in the accident, registered under the number JA13XJ, was MSN 538, delivered to Japan Airlines from the production line on 10 November 2021.
In line with International Civil Aviation Organization (ICAO) Annex 13 recommendations, Airbus will provide technical assistance to the Bureau d’Enquêtes et d’Analyses (BEA) of France and to the Japan Transport Safety Board (JTSB) in charge of the investigation. For this purpose, Airbus is presently dispatching a team of specialists to assist the Authorities.
When a freight train derailed, the track system and a lane change gate in the Gotthard base tunnel were severely damaged. This safety-relevant device is required to separate the two tunnel tubes. Safety has top priority, which is why the second tube cannot be used for passenger or freight traffic. It cannot be used for freight traffic until at least midnight on Wednesday, August 16, 2023. This increases the travel time between German-speaking Switzerland and Ticino by around an hour. Since international travelers have to change trains in Chiasso, their travel time is about two hours longer. SBB apologizes for the inconvenience.
A precise statement on the cause and extent of damage cannot be made at this time. The Swiss Safety Investigation Board and the cantonal investigation authorities are investigating the accident. The accident site has not yet been released by the investigative authorities for clean-up and repair work.
Due to the increased volume of traffic and the limited alternative connections at the weekend and the limited number of seats, SBB urgently recommends postponing spontaneous train journeys via the Gotthard and asks for your understanding.
According to the Railway Ordinance, freight trains can travel on the panoramic route up to a certain corner height. Accordingly, a large proportion of inland transport is carried out via this route, while a small proportion is temporarily transported by road. Combined transport (containers, semi-trailers, trucks) exceeds this corner height and can therefore only drive on the Gotthard axis via the Gotthard base tunnel. For this reason, combined transport in the transit area is diverted via the Lötschberg-Simplon axis or retained in the exit terminals. There are only small restrictions on the transport of goods and the flow of goods is ensured. SBB will provide information again in due course.
We are in mourning today for the people who lost their lives due to the derailment of the Empire Builder train Saturday, near Joplin, Montana, on the BNSF Railway, as well as the many others who were injured. We have no words that can adequately express our sorrow for those who lost a loved one or who were hurt in this horrible event. They are in our thoughts and prayers.
We are fully cooperating with the investigation, working closely with National Transportation Safety Board, the Federal Railroad Administration, local law enforcement and response agencies. We share the sense of urgency to understand why the accident happened; however, until the investigation is complete, we will not comment further on the accident itself. The NTSB will identify the cause or causes of this accident, and Amtrak commits to taking appropriate actions to prevent a similar accident in the future.
Amtrak’s immediate and sustained focus is on doing everything we can to help our passengers and crew, especially the families of those who were injured or died, at this painful and difficult time. Our Incident Response Team has been initiated. We have sent emergency personnel and Amtrak leadership to the scene to help support our passengers, our employees and their families with their needs. Individuals with questions about their family and friends aboard this train should call 800-523-9101. We have also established a Family Assistance Center in Great Falls, Montana, and we will have family assistance liaisons at that site to reach out to those injured and their families to make sure they get what they need. We have dispatched nurse case managers to support those hospitalized. As soon as Amtrak has permission, we will access the accident site to retrieve the personal effects of our passengers and crew.
We want to extend our deep gratitude and sincere appreciation to the Joplin and greater Liberty County communities and other Montana counties and their selfless first responders, hospital staff and law enforcement for their immediate and ongoing help to support of all those aboard the Empire Builder for responding with such urgency, compassion and patience.
Predicting the weather even more accurately, analyzing climate changes even more precisely, researching even better how the world is developing. This is the goal of a globally unique cooperation between Lufthansa and several research institutes.
Converting an aircraft into a climate research plane poses major challenges. Lufthansa has chosen the most modern and economical long-haul jet in its fleet – an Airbus A350-900 named “Erfurt” (registration D-AIXJ). In three stages, the “Erfurt” will now become a flying research laboratory.
In Lufthansa Technik’s hangar in Malta, the first and most extensive conversion work was carried out. Preparations were made for a complex air intake system below the belly. This was followed by a series of test insertions, at the end of which came the certification of a climate research laboratory weighing around 1.6 tons, the so-called CARIBIC measurement laboratory. The acronym CARIBIC stands for “Civil Aircraft for the Regular Investigation of the atmosphere Based on an Instrument Container” is part of a comprehensive European research consortium.
The “Erfurt” is expected to take off from Munich at the end of 2021 for its first flight in the service of climate research, measuring around 100 different trace gases, aerosol and cloud parameters in the tropopause region (at an altitude of nine to twelve kilometers). Lufthansa is thus making a valuable contribution to climate research, which can use these unique data to assess the performance of current atmospheric and climate models and thus their predictive power for the Earth’s future climate. The special feature: Climate-relevant parameters can be recorded at this altitude with much greater accuracy and temporal resolution on board the aircraft than with satellite-based or ground-based systems.
The A350 conversion, which has now been launched, was preceded by an ex-tremely elaborate planning and development phase of about four years involving more than ten companies (in particular Lufthansa, Lufthansa Technik, Airbus, Saf-ran, enviscope, and Dynatec) as well as the Karlsruhe Institute of Technology (KIT) as representative of a larger scientific consortium.
The Lufthansa Group has been a reliable partner of climate research since 1994 and has since equipped several aircraft with special instruments. This is now the first time worldwide on an Airbus A350-900 aircraft.
Boeing released the following statement in regards to United Airlines Flight 328 which suffered an engine failure upon takeoff from Denver International Airport:
“Boeing is actively monitoring recent events related to United Airlines Flight 328. While the NTSB investigation is ongoing, we recommended suspending operations of the 69 in-service and 59 in-storage 777’s powered by Pratt & Whitney 4000-112 engines until the FAA identifies the appropriate inspection protocol.
Boeing supports the decision yesterday by the Japan Civil Aviation Bureau, and the FAA’s action today to suspend operations of 777 aircraft powered by Pratt & Whitney 4000-112 engines. We are working with these regulators as they take actions while these planes are on the ground and further inspections are conducted by Pratt & Whitney.
AKARTA (Reuters) – An Indonesian court on Friday jailed Emirsyah Satar, a former chief executive of Garuda Indonesia, for bribery and money laundering related to procurement of planes and engines from Airbus and Rolls-Royce, his laywer said.
Satar’s lawyer Luhut Pangaribuan said his client had been given an eight-year sentence and fined S$2 million ($1.4 million) by the country’s corruption court.
Indonesia’s Corruption Eradication Commission (KPK) had indicted Satar, CEO of Garuda from 2005 to 2014, over payments from a businessman via a third party for the procurement by Garuda Indonesia of Roll-Royce Trent 700 engines and Airbus A320 and A330 planes.
The indictment also related to the procurement of Airbus planes for PT Citilink Indonesia, a unit of Garuda.
In 2017 Rolls-Royce agreed to pay authorities more than $800 million to settle charges after an investigation by the U.S. Justice Department and Britain’s Serious Fraud Office into alleged bribery of officials in six countries in schemes that lasted more than a decade.
Airbus in February this year agreed to pay a record $4 billion in fines after reaching a plea bargain with prosecutors in Britain, France and United States over alleged bribery and corruption stretching back at least 15 years.
Satar, who had previously denied wrongdoing, will decide next week whether to appeal against his sentence, said Pangaribuan.
($1 = 1.4139 Singapore dollars)
(Reporting by Agustinus Beo Da Costa; Writing by Ed Davies; Editing by David Goodman)
FILE PHOTO: FILE PHOTO: The Airbus logo is pictured at Airbus headquarters in Blagnac near Toulouse
PARIS/LONDON/WASHINGTON (Reuters) – Airbus <EADSY> bribed public officials and hid the payments as part of a pattern of worldwide corruption, prosecutors said on Friday as the European planemaker agreed a record $4 billion settlement with France, Britain and the United States.
The disclosures, made public after a nearly four-year investigation spanning sales to more than a dozen overseas markets, came as courts on both sides of the Atlantic formally approved settlements that lift a legal cloud that has hung over Europe’s largest aerospace group for years.
“It was a pervasive and pernicious bribery scheme in various divisions of Airbus SE that went on for a number of years,” U.S. District Judge Thomas Hogan said.
The deal, effectively a corporate plea bargain, means Airbus has avoided criminal prosecution that would have risked it being barred from public contracts in the United States and European Union – a massive blow for a major defence and space supplier.
Prosecutors said individuals could still face criminal charges, however.
Airbus, whose shares closed down 1%, has been investigated by French and British authorities for alleged corruption over jet sales dating back more than a decade. It has also faced U.S. inquiries over suspected violations of U.S. export controls.
“In reaching this agreement today, we are helping Airbus to turn the page definitively” on corrupt past practices, French prosecutor Jean-Francois Bohnert said.
France’s financial prosecutor said the company had also agreed to three years “light compliance monitoring” by the country’s anti-corruption agency.
The U.S. Department of Justice said the deal was the largest ever foreign bribery settlement.
CODE NAME ‘VAN GOGH’
In a packed hearing at London’s Royal Courts of Justice, an Airbus lawyer said the settlements “draw a clear line under the investigation and under the grave historic practices”.
Outlining detailed findings, the UK’s Serious Fraud Office (SFO) said Airbus had hired the wife of a Sri Lankan Airlines executive as its intermediary and misled Britain’s UKEF export credit agency over her name and gender, while paying $2 million to her company. The airline could not be reached for comment.
FILE PHOTO: Frankfurt hosts the international Motor Show (IAA)
DETROIT (Reuters) – The United Auto Workers union said on Friday that rank-and-file members at Ford Motor Co <F> have voted in favor of a new four-year labor contract with the No. 2 U.S. automaker.
The UAW will now focus on Fiat Chrysler Automobiles (FCA) <FCAU>, the sole remaining Detroit automaker without a new labor contract. Talks with FCA are expected to begin on Monday, a UAW spokesman said.
The union said 56.3% of Ford’s hourly workers voted to approve the deal, which allowed the company to avoid a strike like the one that cost its larger rival General Motors Co <GM> about $3 billion (£2.3 billion).
UAW leaders said earlier this month that Ford under the deal agreed to invest more than $6 billion in its U.S. plants, and to create or retain more than 8,500 UAW jobs.
The deal also includes pay raises and lump-sum payments over the life of the contract, a pathway to full-time employment for temporary employees and unchanged healthcare coverage.
Workers at GM approved a deal in late October that ended a contentious 40-day U.S. strike, the longest automotive labor stoppage since 1970.
Detailed terms of the Ford deal – released just a week after GM workers approved their new contract – echoed those agreed to with GM, as the union typically uses the first deal as a template for those that follow.
UAW leaders managed contract negotiations with Ford and GM, including the lengthy strike, while struggling with an ongoing federal corruption probe.
To date, 10 people have pleaded guilty in connection with the criminal investigation into illegal payoffs. Just last week former UAW vice president and former GM board member Joseph Ashton was charged with conspiracy to commit money laundering and wire fraud.
Earlier this month the UAW said that its president, Gary Jones, who had been linked to the ongoing corruption probe, was taking a leave of absence.
Rory Gamble, the union’s acting head, said last week he will examine every department of the union in response to the spreading federal corruption probe to prevent future misuse of members’ dues.
(Reporting by Nick Carey and Ben Klayman in DetroitEditing by Matthew Lewis and Cynthia Osterman)
WASHINGTON (Reuters) – Southwest Airlines Co <LUV> said Monday it will complete inspections on 38 737 airplanes it acquired from foreign air carriers by Jan. 31 that may not meet all U.S. aviation safety requirements.
The planes are part of 88 pre-owned Boeing <BA> 737 aircraft Southwest bought between 2013 and 2017 from 16 foreign carriers. The speedier checks come after inspections of 39 used planes turned up previously undisclosed repairs and incorrectly completed fixes. Southwest used multiple contractors to conduct the reviews of the planes’ maintenance records when they bought the planes.
“We have a plan in place to inspect the 47 remaining aircraft, nine of which are currently in heavy checks, no later than January 31, 2020 – five months earlier than the original FAA accepted completion date of July 1,” Southwest said in a statement on Monday.
Southwest said its inspections to date “did not stem from any suspected safety concerns with the aircraft.” It added its “continuous assessment of the ongoing inspections has revealed nothing to warrant the expedited timeline” but will meet it nevertheless.
In 2018, Southwest agreed to conduct a complete physical inspection on each of these pre-owned aircraft over a two-year period after a Federal Aviation Administration (FAA) safety inspector in May 2018 discovered discrepancies in records for some of 88 aircraft.
Since then, Southwest said it has completed the nose-to-tail inspection of 41 aircraft without any findings that suggested an “adverse impact on continued safe operation.”
An Oct. 24 memo from H. Clayton Foushee, director of the FAA Audit and Evaluation Office, made public on Monday said the Southwest inspections turned up at least 30 previously unknown repairs and 42 major repairs that were found “not to meet FAA airworthiness requirements.” Some required “immediate corrective action to bring the aircraft back into compliance.”
The memo added “the data collected to date would indicate that a majority of” the planes to be inspected do not meet FAA airworthiness requirements.
The U.S. Senate Commerce Committee noted on Monday that the 2018 discovery prompted a full records review by Southwest Airlines of all 88 aircraft that found 360 major repairs previously unknown to the airline because they were not disclosed in the contractors’ initial review.
Foushee’s memo said Southwest grounded 34 planes in November 2018 for inspections. The committee said as a result some planes were grounded “for immediate maintenance to bring them into regulatory compliance as a result of these newly discovered prior major repairs.”
The FAA then sent an Oct. 29 letter to Southwest seeking additional information about the uninspected planes and questioned whether they suffered specific damage items. It also raised concerns about Southwest’s “slow pace in completing the evaluation of aircraft.”
Senate Commerce Committee Chairman Roger Wicker said in an Oct. 30 letter to the FAA that its concerns about Southwest’s used planes correspond “to concerns that have been brought to my attention by whistleblowers as part of my investigation into aviation safety.”
The committee said the FAA allowed Southwest to continue to operate these aircraft and as a result “Southwest Airlines appears to have operated aircraft in unknown airworthiness conditions for thousands of flights.”
The FAA said Monday that after receiving Southwest’s response it determined the airline has “met the requirements for immediate inspection and risk assessments on these aircraft.”
The FAA added it “is requiring more frequent updates on the progress of completing all the requirements.”
(Reporting by David Shepardson; additional reporting by Tracy Rucinski in Chicago; editing by Jonathan Oatis)
FILE PHOTO: A number of grounded Southwest Airlines Boeing 737 MAX 8 aircraft are shown parked at Victorville Airport in Victorville, California
CHICAGO, Oct. 25, 2019 /PRNewswire/ — Boeing (NYSE: BA) issued the following statement regarding the release today of the final investigation report of Lion Air Flight 610 by Indonesia’s National Transportation Safety Committee (KNKT):
“On behalf of everyone at Boeing, I want to convey our heartfelt condolences to the families and loved ones of those who lost their lives in these accidents. We mourn with Lion Air, and we would like to express our deepest sympathies to the Lion Air family,” said Boeing President & CEO Dennis Muilenburg. “These tragic events have deeply affected us all and we will always remember what happened.”
“We commend Indonesia’s National Transportation Safety Committee for its extensive efforts to determine the facts of this accident, the contributing factors to its cause and recommendations aimed toward our common goal that this never happens again.”
“We are addressing the KNKT’s safety recommendations, and taking actions to enhance the safety of the 737 MAX to prevent the flight control conditions that occurred in this accident from ever happening again. Safety is an enduring value for everyone at Boeing and the safety of the flying public, our customers, and the crews aboard our airplanes is always our top priority. We value our long-standing partnership with Lion Air and we look forward to continuing to work together in the future.”
Boeing experts, working as technical advisors to the U.S. National Transportation Safety Board, have supported the KNKT over the course of the investigation. The company’s engineers have been working with the US Federal Aviation Administration (FAA) and other global regulators to make software updates and other changes, taking into account the information from the KNKT’s investigation.
Since this accident, the 737 MAX and its software are undergoing an unprecedented level of global regulatory oversight, testing and analysis. This includes hundreds of simulator sessions and test flights, regulatory analysis of thousands of documents, reviews by regulators and independent experts and extensive certification requirements.
Over the past several months Boeing has been making changes to the 737 MAX. Most significantly, Boeing has redesigned the way Angle of Attack (AoA) sensors work with a feature of the flight control software known as Maneuvering Characteristics Augmentation System (MCAS). Going forward, MCAS will compare information from both AoA sensors before activating, adding a new layer of protection.
In addition, MCAS will now only turn on if both AoA sensors agree, will only activate once in response to erroneous AOA, and will always be subject to a maximum limit that can be overridden with the control column.
These software changes will prevent the flight control conditions that occurred in this accident from ever happening again.
In addition, Boeing is updating crew manuals and pilot training, designed to ensure every pilot has all of the information they need to fly the 737 MAX safely.
Boeing continues to work with the FAA and other regulatory agencies worldwide on the certification of the software update and training program to safely return the 737 MAX to service.
