Singapore, February 19, 2024, PRNewswire – (Singapore Airshow) Pratt & Whitney, an RTX (NYSE: RTX) business, today announced the official opening of a 48,000 square-foot expansion of its Singapore based engine center, Eagle Services Asia (ESA). The facility will grow its GTF capacity by two-thirds this year.
The transformative technology insertion applied across both ESA sites integrates robotics, automation and machine learning to increase efficiency, lower stress on machine operators and increase safety for key MRO processes.
These innovations include fully automated high-pressure compressor (HPC) rotor stacking, a Receive-in-Check Cobot that augments the work done by human inspectors and a robotic arm to install and remove HPC bearing sleeves.
ESA, a joint venture between SIA Engineering Company and Pratt & Whitney, is a member of the Pratt & Whitney GTF™ MRO network. Since introducing GTF MRO capability in 2019, the facility has already completed over 500 GTF engine overhauls.
Forward-Looking Statements
This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.
Santa Clara, California, December 6, 2023 – Airbus Group SE (Paris: AIR) and BMW Group (Xetra: BMWG) launch a global Quantum Computing Challenge entitled “The Quantum Mobility Quest” to tackle the most pressing challenges in aviation and automotive that have remained insurmountable for classical computers. This challenge is the first-of-its-kind, bringing together two global industry leaders to harness quantum technologies for real-world industrial applications, unlocking the potential to forge more efficient, sustainable and safer solutions for the future of transportation.
Quantum computing has the potential to significantly enhance computational power and to enable the most complex operations that challenge even today’s best computers. In particular, for data-driven industries like the transportation sector, this emerging technology could play a crucial role in simulating various industrial and operational processes, opening up opportunities to shape future mobility products and services.
Challenge candidates are invited to select one or more problem statements: improved aerodynamics design with quantum solvers, future automated mobility with quantum machine learning, more sustainable supply chain with quantum optimisation, and enhanced corrosion inhibition with quantum simulation. Additionally, candidates can put forward their own quantum technologies with the potential to develop native apps yet to be explored in the transportation sector.
The challenge is hosted by The Quantum Insider (TQI) and divided into two parts, a four-month phase where participants will develop a theoretical framework for one of the given statements, and a second phase during which selected finalists will implement and benchmark their solutions. Amazon Web Services (AWS) provides candidates with an opportunity to run their algorithms on their Amazon Braket quantum computing service.
A jury composed of world-leading quantum experts will team up with experts from Airbus, BMW Group, and AWS to evaluate submitted proposals and award one winning-team with a €30,000 prize in each of the five challenges, by the end of 2024.
This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.
Collins Aerospace Ascentia® tool to be installed on Korean Air 787 Fleet
Charlotte, North Carolina, November 8, 2023, PRNewswire – Collins Aerospace, an RTX business (NYSE: RTX), announced today that its Ascentia® Prognostic and Health Management (PHM) solution has been selected by Korean Air Lines Co. (Seoul: 003490) for use on its growing Boeing (NYSE: BA) 787 fleet.
The cloud-based solution uses advanced data analytics and machine learning algorithms to help airlines improve maintenance operations and increase aircraft reliability. Analyzing flight data and maintenance records in real-time allows Ascentia to help predict potential maintenance issues and provide recommendations for corrective actions, improving aircraft availability and reducing unscheduled downtime.
Collins Aerospace’s Ascentia solution is currently in use by several major airlines around the world. Equipping KAL’s Boeing 787 fleet with Ascentia represents a significant milestone as Collins Aerospace expands its presence in the Asia-Pacific region.
Forward-Looking Statements
This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.
Florham Park, New Jersey/Mountain View, California — A.P. Moller – Maersk AS (OTC: AMKBY) and Kodiak Robotics, Inc., have launched the first commercial autonomous trucking lane between Houston and Oklahoma City. The freight lane marks an expansion of the collaboration between Kodiak and Maersk, which began with their first autonomous freight deliveries together in November 2022 as part of Maersk’s Global Innovation Center Program. Kodiak has been delivering eight loads per week, with a safety driver behind the wheel, for Maersk customers since August.
Kodiak and Maersk are completing four round trips per week on a 24-hour-a-day, four-day-a-week basis between a Houston facility, where consumer products are loaded onto 53-foot trailers, to a distribution center in Oklahoma City. Operational learnings gained from the activity are captured and documented as part of the Kodiak Partner Deployment Program, which is designed to help companies learn how Kodiak’s self-driving trucks can become an integral part of their overall logistics strategy and offerings.
Autonomous trucking solutions have the potential to address long-term challenges faced by the trucking industry. According to the American Trucking Association, the trucking industry faces a shortage of roughly 78,000 drivers. The ATA estimates that, based on current driver demographic trends, as well as projected growth in freight demand, the shortage could swell to more than 160,000 over the next decade.
Safety continues to be a perennial challenge for the trucking industry as well. U.S. National Highway Traffic Safety Administration (NHTSA) research also estimates that 94% of crashes occur due to human error. For Kodiak, safety and performance are foundational to its autonomous trucking solution. Each vehicle is equipped with 18 different sensors, including cameras, radar, and lidar, that provide the platform with a 360-degree view around the truck. Every tenth of a second, the truck evaluates the performance of more than 1,000 safety-critical processes and components in both the self-driving stack and the underlying truck platform. The trucks learn in parallel, with system upgrades shared to the entire fleet simultaneously, and are not subject to environmental distractions.
– New courses include helicopter specific eLearning courses for G1000H NXi
Garmin® International Inc., a unit of Garmin Ltd., is pleased to announce two new eLearning training courses for the G1000® NXi, as well as two separate eLearning courses for the G1000H NXi integrated flight deck for helicopters. These training courses are available in a virtual eLearning format allowing pilots to learn at their own pace, with the G1000 NXi Fundamentals eLearning Course providing a foundational understanding of the system, while the G1000 NXi Essentials eLearning Course is focused on systems installed in high-performance piston and turbine engine aircraft. The two comprehensive eLearning courses for the G1000H NXi integrated flight deck titled G1000H NXi Fundamentals, and G1000H NXi Advanced-IFR, use scenario-based training to highlight helicopter-specific operations and are tailored for pilots new to the G1000H NXi system, in addition to those with experience wanting a deeper understanding of the system.
Core training topics All four training courses build on a common core of training topics. These topics are common to all G1000 NXi and G1000H NXi systems but are tailored to the audience for each course. The topics include:
Primary Flight Display (PFD) and Multifunction Display (MFD) function
Audio Panel Features
Automatic Flight Control System
Hazard Avoidance Features
Safety Features
Abnormal Operations
Managing Databases
Operational Flight Scenario
Learn best-practices for G1000 NXi operational use
For those that are new to Garmin avionics, transitioning to advanced avionics, or perhaps want to refresh their understanding of the system, the G1000 NXi Fundamentals eLearning Course provides comprehensive training on the system designed for piston engine equipped aircraft. This course describes features of the system in detail and use a scenario to demonstrate how particular features function in different phases of flight in order to see this advanced system in action. In order to practice what you learned during this course, the Garmin G1000 NXi PC Trainer software is available for purchase online.
G1000 NXi for high-performance piston and turbine aircraft
For those operating high-performance piston or turbine-engine equipped aircraft, the G1000 NXi Essentials course presents best-practices for the G1000 NXi integrated flight deck by providing detailed training for pilots wanting to get the most out of the system. In addition to describing features in detail and showing how they can be used effectively in flight, scenario-based training demonstrates typical high-performance piston and turbine-engine aircraft operations, providing an opportunity to see the G1000 NXi system in full effect. For your specific or similar aircraft, the Garmin G1000 NXi PC Trainer software is available for purchase online, and provides the opportunity to take what you learned throughout the course and apply it. In addition to the core training topics, the G1000 NXi Essentials eLearning Course includes additional instruction on:
Vertical Navigation
Automatic Flight Control System
Advanced Features
User Waypoints
Managing Databases
Multiple Operational Flight Scenarios with different performance profiles
Build helicopter-specific system knowledge
The G1000H NXi Fundamentals course is designed for VFR helicopter pilots who are new to Garmin avionics, transitioning to advanced avionics, or perhaps want a refresher on the G1000H NXi. This allows the pilot to be comfortable with the avionics and maximize learning during valuable flight time. Learn how to take full advantage of the capabilities of the G1000H NXi system while gaining experience with operational use best practices. This virtual course allows pilots to learn at their own pace, details system features and provides a VFR flight scenario to show how these features are used in various phases of flight. Those that sign up for this course receive an additional scripted scenario for more practice through the Bell 407GXi G1000H NXi PC Trainer software, available for purchase online. The core training topics in the G1000H NXi Fundamentals eLearning Course have been tailored to helicopter-specific features and functionality, including differences for:
PFD and MFD function
Audio Panel Features
Hazard Avoidance Features
Operational Flight Scenario
Scenario-Based Exercise
Enhance IFR helicopter skills with G1000H NXi
The G1000H Advanced-IFR course provides a detailed look at the G1000H NXi system and illustrates best practices for operational use of the flight deck, with a focus on Instrument Flight Rules (IFR). The course uses phase of flight scenarios to demonstrate typical IFR helicopter operation, and depicts common practices to maximize the benefits of system features and capabilities. For helicopter pilots who fly search-and-rescue missions, emphasis on user waypoints are included in the course scenarios. Pilots can further practice what they learned throughout the course with one of the additional scripted scenarios provided for use with the purchase of the Bell 407GXi G1000H NXi PC Trainer software. Some helicopter-tailored training topics covered in the Advanced IFR eLearning Course include:
PFD and MFD function
Automatic Flight Control System
Hazard Avoidance Features
Advanced Features
User waypoints
Operational Flight Scenarios
Proceed through the course at a pace that works best
Available immediately after purchase using a computer or tablet device with internet access, pilots can navigate through the virtual course at their own pace. Assessments throughout the course validate knowledge obtained of critical items while documenting the learning process. With the ability to pause lessons as needed to return to the lesson later, this is a convenient option for any pilot. Also, pilots can retake specific lessons or even the entire course during the subscription period.
The G1000 NXi Fundamentals eLearning course is available now for $94.95 USD, and the G1000 NXi Essentials eLearning Course is now available for $145.95 USD. Also available is the G1000H NXi Fundamentals eLearning Course for $74.95 USD, as well as the G1000H NXi Advanced IFR eLearning Course is available for $94.95 USD. For aviation training needs, including purchasing one of these eLearning courses, please visit www.fly.garmin.com/training.
