Tag: manufacturing (Page 1 of 10)

Eve announces list of eVTOL suppliers

January 29, 2024 / WIL BALDWIN

Melbourne, Florida, January 29, 2024 – Eve Air Mobility (NYSE: EVEX) has named four additional suppliers for its electric vertical takeoff and landing (eVTOL) aircraft. Thales will supply a proven air data solution, comprising sensors and a computer while Honeywell (NYSE: HON) will supply guidance, navigation and external lighting for the aircraft. RECARO Aircraft Seating will supply the eVTOL’s seats and FACC will supply the horizontal and vertical tail including the rudder and elevator.

Honeywell will supply guidance and navigation products including magnetometers, GPS-aided attitude & heading reference systems, and inertial reference systems built upon decades of engineering and manufacturing experience. These systems will relay and aid the pilots and other onboard systems to ensure safe and efficient flight. The company will also supply external lighting for the aircraft.

Thales will supply a proven air data solution, comprising sensors and computer, which gather critical data such as airspeed, altitude and environmental conditions. The solution then relays the information to pilots and onboard systems to ensure safe and efficient flight in all weather conditions.

RECARO Aircraft Seating, a global supplier of premium aircraft seats for airlines, OEMs and eVTOL aircraft, was selected to design, certify and produce the four passenger seats and one pilot seat for the aircraft. RECARO is widely recognized for product innovation, award-winning customer service and commitment to reliability, efficiency and sustainable practices.

FACC was selected to lead the development and production of the eVTOL’s horizontal and vertical tail including its rudder, elevator and the aircraft’s aileron. FACC is recognized for its production of lightweight components relying on innovative manufacturing techniques and technology.

These new suppliers are in addition to Garmin (NYSE: GRMN), Liebherr Aerospace and Intergalactic that were announced in October and Nidec Aerospace LLC, a joint venture between Japan’s Nidec Corporation and Brazil’s Embraer SA (B3: EMBR3), BAE Systems PLC (London: BAES) and DUC Hélices Propellers which were announced at the Paris Air Show this past summer.

Forward-Looking Statements

This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

Airbus and Tata to set up first helicopter Final Assembly Line in India

January 26, 2024 / WIL BALDWIN

New Delhi, India, January 26, 2024 – In a major boost to ‘Make in India’, Airbus Group SE (Paris: AIR) Helicopters has announced that it is partnering with the Tata Group to establish a Final Assembly Line (FAL) for helicopters in the country. The FAL will produce Airbus’ best-selling H125 helicopter from its civil range for India and export to some of the neighbouring countries.

The FAL will be the first instance of the private sector setting up a helicopter manufacturing facility in India, providing a major boost to the Government of India’s ‘AatmaNirbhar Bharat’ (self-reliant India) programme. Under this partnership, Tata Advanced Systems Limited (TASL), a subsidiary of Tata Group, will set up the facility along with Airbus Helicopters.

The announcement was made during the two-day visit of French President Emmanuel Macron to India as Chief Guest at the Republic Day celebrations on January 26.

The FAL in India will undertake the integration of the major component assemblies, avionics and mission systems, installation of electrical harnesses, hydraulic circuits, flight controls, dynamic components, fuel system and the engine. It will also do testing, qualification, and delivery of the H125 to customers in India and the region. The FAL will take 24 months to set up and deliveries of the first ‘Made in India’ H125s are expected to commence in 2026. The location of the FAL will be jointly decided by Airbus and the Tata Group.

Forward-Looking Statements

MD Helicopters announce record orders for 2023

January 18, 2024 / WIL BALDWIN

Mesa, Arizona, January, 2024 – MD Helicopters, LLC (MDH) proudly announces record orders for the fiscal year 2023. The company experienced an increase in demand, resulting in the highest number of annual orders since 2008. MD Helicopters credits this accomplishment to its renewed commitment to customer satisfaction, enhancing aftermarket services, and striving for excellence in both the military and commercial sectors. The company’s focus and unwavering dedication to providing top-tier products and services have resonated with customers worldwide and across various markets, resulting in the substantial growth observed in 2023.

Among the key contributing factors to this success are significantly improving customer support, increased investment in direct communications with customers, enhancing manufacturing efficiencies, ensuring in-stock spares availability, and maintaining healthy supplier relationships. This strategic approach has not only strengthened MDH’s market position but has solidified its reputation as a rotorcraft industry leader.

In addition to the Nigerian Federal Government (12 aircraft) announced earlier this year, recent commercial transactions involved MD 530Fs designated for multi-use missions. These additions include VIP aircraft sales, featuring an expansion to the Clemens Aviation fleet, procurement by the United States Department of Agriculture for agricultural missions, and fulfilling various utility needs, such as those of WCF Aerospace, representing Skydance Helicopters that specializes in power and utility services, amongst others. MDH is actively pursuing a well-rounded approach, emphasizing both military and commercial sales and showcasing the positive impacts of the company’s recent changes.

Transavia France takes delivery of its first A320neo

January 10, 2024 / WIL BALDWIN

Toulouse, France, January 10, 2024 – French low-cost carrier Transavia France, part of the Air France-KLM Group, has taken delivery of its first Airbus Group SE (Paris: AIR) A320neo, on lease from Avolon, from Airbus manufacturing site in Toulouse. The airline has opted for the Airbus option to have the delivery flight to Paris-Orly powered by a sustainable aviation fuel blend on board.

The new aircraft features 186 seats in a single class layout. Selected for its outstanding operational efficiency, reduced emissions and comfort, the A320neo will be deployed by Transavia France on its services on its domestic network as well as across its European and Mediterranean markets.

Forward-Looking Statements

Eve names avionics, flight controls and thermal management system suppliers

November 6, 2023 / WIL BALDWIN

Melbourne, Florida, November 6, 2023 – Eve Air Mobility (NYSE: EVEX) named three new suppliers for its electric vertical takeoff and landing (eVTOL) aircraft. Garmin (NYSE: GRMN), will supply the avionics for the aircraft while Liebherr-Aerospace will supply the flight controls actuators. Intergalactic will provide the thermal management system.

Garmin will supply the G3000 Integrated Flight Deck for Eve’s eVTOL which features large-format, light weight, high-resolution glass displays integrating seamlessly with Eve’s vehicle management and flight control systems. Tailored for the needs of eVTOL aircraft, the flight deck’s intuitive touchscreen interface reduces pilot workload by providing direct access to a full suite of avionics capabilities including an integrated flight management system, NAV/COM radios, transponder, audio management and access to a breadth of applications including checklists, charts, synoptics, and full-featured maps.

Liebherr will develop electromechanical actuators (EMA) for the fly-by-wire flight controls of Eve’s eVTOL. Liebherr is well known for their expertise in the manufacturing of precision gears and dependable actuation, crucial for this type of technology. The actuators will be powered by the aircraft’s electrical system and the technology will ensure high performance, configurability and easier maintenance.

Intergalactic will provide the thermal management system which will maintain an optimal temperature range for equipment including batteries and other electronic components. The system will also help ensure a comfortable temperature inside the cabin of the aircraft.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

RTX, Rafael plan new missile production facility in Camden, Arkansas

October 26, 2023 / WIL BALDWIN

East Camden, Arkansas, October 26, 2023, PRNewswire – Raytheon, an RTX (NYSE: RTX) business, in partnership with Rafael Advanced Defense Systems, will build a manufacturing facility in East Camden, Arkansas to produce the Tamir missile for the Iron Dome Weapon System and its U.S. variant, SkyHunter^®.

Through the established Raytheon-Rafael Area Protection Systems joint venture, the companies have committed to a $33 million capital investment to establish the new facility. Once operational, the facility will produce missiles for the U.S. Marine Corps and other allied partners.

Raytheon and Rafael have teamed for over a decade on Iron Dome, which has more than 5,000 operational intercepts and a success rate exceeding 90%. The U.S. version of the Iron Dome Weapon System’s Tamir, SkyHunter, is a medium-range air defense weapon designed to counter a range of threats, including cruise missiles, manned and unmanned aircraft, rockets, artillery and mortars. SkyHunter missiles will be produced for the U.S. Marine Corps Medium Range Intercept Capability, or MRIC, program.

The joint venture plans to break ground on the new facility before the end of the year with the intent to begin missile production in 2025.

Air Canada orders 18 Boeing 787-10’s, will fly every model in 787 Dreamliner family

September 25, 2023 / WIL BALDWIN

Seattle, Washington, September 25, 2023, PRNewswire – Boeing (NYSE: BA) and Air Canada (Toronto: AC) announced today the carrier is selecting the 787 Dreamliner to further modernize and grow its fleet with an order for 18 787-10 widebody jets, with the option to purchase 12 more. The flag carrier of the country, Air Canada will deploy the new fuel-efficient airplanes as part of its broader strategy to reduce carbon emissions while expanding its global route network.

Reducing fuel use and improving efficiency by up to 25% compared to previous generation jets, the 787 helps advance Air Canada’s ambitious environment goals over the next several decades. The carrier is positioned to optimize its fleet as it adds international routes in new and existing markets, further benefiting from the Dreamliner family’s route flexibility and operating economics.

Air Canada currently operates a fleet of 38 787s, including eight 787-8 and 30 787-9 jets. The largest model in the family, the 787-10, can carry up to 336 passengers with a range of 6,330 nautical miles (11,730 km).

With the selection of the 787 Dreamliner family, Air Canada is supporting economic growth and jobs across the Canadian aviation industry. Canada is among Boeing’s largest international supply bases with more than 550 suppliers. There are more than a dozen Canadian suppliers supporting the 787 program, including Boeing’s aerospace composite manufacturing facility in Winnipeg. Each year, Boeing contributes around $4 billion Canadian dollars in economic benefit to the country while supporting more than 14,000 direct and indirect jobs.

KiwiRail re-opens rail line to Napier in cyclone Gabrielle recovery milestone

September 18, 2023 / WIL BALDWIN

The reopening of the rail line to Napier – allowing rail freight to once again get to Napier Port – is an important step for the Hawke’s Bay cyclone recovery, KiwiRail Chief Executive Peter Reidy says. Scheduled freight services resumed Monday, September 18, following a seven month pause after the rail line was badly damaged by Cyclone Gabrielle.

Cargo that is typically carried by rail includes chilled and frozen meat, wood products such as logs, pulp and timber, food products and imported machinery and consumables used in manufacturing. Following the cyclone in February, KiwiRail reopened the Palmerston North – Gisborne Line to Hastings at the start of April. Temporary Container Terminal sites were also set up in partnership with Napier Port, transport operators and cargo customers so that freight could be railed to Hastings, then trucked to Napier.

The section of line between Hastings and Napier, particularly around Awatoto, was badly damaged in the cyclone, with track and embankments washed away, and major damage to Bridge 217, which lost piers and spans in the floods. The work included rebuilding two-metre-high embankments, replacing 800 sleepers, 140 metres of rail, laying 3,000 cubic metres of formation (the rock foundation under the tracks) and 3,500 tonnes of ballast.

KiwiRail also railed steel casings to Hastings from Christchurch for replacement bridge piers on Bridge 217 – which have been driven 30 metres into the riverbed. The rebuild of Bridge 217 is temporary, in order to get rail freight moving as quickly as possible. A permanent new bridge will be designed and built over the next couple of years.

Airbus delivers first C295 to India

September 13, 2023 / WIL BALDWIN

Seville, Spain, September 13, 2023 – Airbus Group SE (Paris: AIR) Defence and Space has officially handed over in fly-away condition the first of 56 C295 aircraft to the Indian Air Force (IAF) to begin replacing its ageing Avro 748 fleet.

The C295, in transport configuration and with an indigenous electronic warfare suite, will leave Airbus’ production site in Seville, Spain, for Delhi, India, in the next few days, piloted by a joint IAF and Airbus crew.

The first 16 C295’s of the 56 aircraft on order will be assembled at the San Pablo Sur site in Seville, Spain, with the second aircraft due to be delivered in May 2024 and the next 14 rolled out at a rate of one per month until August 2025.

First C295 ‘Make in India’ in 2026

To boost self-reliance in the defence-manufacturing sector in India, the remaining 40 C295s of the IAF order will be manufactured and assembled – in partnership with Tata Advanced Systems Limited (TASL) – at a Final Assembly Line (FAL) in Vadodara in western India.

The production of components of these aircraft has already started in the Main Constituent Assembly (MCA) facility in Hyderabad, southern India. These parts will be shipped to the Vadovara FAL, which is expected to be operational by November 2024.

The first ‘Make in India’ C295 will roll out of the Vadodara FAL in September 2026 in what will be a milestone for the Indian aerospace industry; the final aircraft expected to be delivered to the IAF by August 2031.

Saab and Boeing sign 787 Dreamliner agreement

September 6, 2023 / WIL BALDWIN

Saab (OTC: SAABF) has signed an extension agreement with Boeing (NYSE: BA) for the manufacturing of large cargo doors, bulk cargo doors and access doors for the Boeing 787 Dreamliner.

The framework agreement is an extension of an existing contract signed with Boeing in 2004 for the 787 Dreamliner program.

Since the programme started, Saab has delivered in excess of 1,100 shipsets for the Boeing 787 Dreamliner programme.

Saab has a long experience in supplying major aerostructures for military as well as commercial aircraft programmes. Like many other major 787 structures, the doors will be mainly made of composite materials. A range of systems are built into the doors’ composite structures, providing Boeing with lightweight doors that are easy to install.

Archives