TOMORROWS TRANSPORTATION NEWS TODAY!

Tag: Opens (Page 1 of 2)

KiwiRail’s next stage of upgrades focused on reducing commuter disruptions

The next stage of KiwiRail’s network rebuild in Auckland will be a lot less disruptive than the previous stages. Since the start of 2023, KiwiRail has had to fully close rail lines in Auckland for work to upgrade and prepare the metro rail network for the more frequent metro trains to come when the City Rail Link opens.

Auckland Transport’s Executive General Manager Public Transport Services Stacey van der Putten says the reduced disruption for Stage 3 will come as welcome news to Auckland’s rail passengers.

During the rebuild period, Western Line trains will run on a single track affecting service frequencies, and timetables will be confirmed in due course.

Details of alternative public transport options will be available on the AT website www.AT.govt.nz/RailRebuild

 

 

 

 

 

 

KiwiRail re-opens rail line to Napier in cyclone Gabrielle recovery milestone

The reopening of the rail line to Napier – allowing rail freight to once again get to Napier Port – is an important step for the Hawke’s Bay cyclone recovery, KiwiRail Chief Executive Peter Reidy says. Scheduled freight services resumed Monday, September 18, following a seven month pause after the rail line was badly damaged by Cyclone Gabrielle.

Cargo that is typically carried by rail includes chilled and frozen meat, wood products such as logs, pulp and timber, food products and imported machinery and consumables used in manufacturing. Following the cyclone in February, KiwiRail reopened the Palmerston North – Gisborne Line to Hastings at the start of April. Temporary Container Terminal sites were also set up in partnership with Napier Port, transport operators and cargo customers so that freight could be railed to Hastings, then trucked to Napier.

The section of line between Hastings and Napier, particularly around Awatoto, was badly damaged in the cyclone, with track and embankments washed away, and major damage to Bridge 217, which lost piers and spans in the floods. The work included rebuilding two-metre-high embankments, replacing 800 sleepers, 140 metres of rail, laying 3,000 cubic metres of formation (the rock foundation under the tracks) and 3,500 tonnes of ballast.

KiwiRail also railed steel casings to Hastings from Christchurch for replacement bridge piers on Bridge 217 – which have been driven 30 metres into the riverbed. The rebuild of Bridge 217 is temporary, in order to get rail freight moving as quickly as possible. A permanent new bridge will be designed and built over the next couple of years.

 

 

 

 

 

 

 

Saab opens new radar production site in Fareham, Hampshire, England

Saab (SAAB-B.ST) UK’s Sensor Systems business operates from Saab’s site in Fareham, with a team also located in Farnborough. The skilled staff in Fareham primarily produce and integrate the new Deployment Set, a configuration of the Giraffe 1X highly mobile, compact, rapidly deployed, software-based, 3D AESA radar. This increases Saab’s production capacity for its Giraffe 1X Deployment Set and the first units are already in production at the Fareham site.

Saab UK’s Sensor Systems business will also act as a Centre of Excellence developing follow-on UK Intellectual Property in the radar domain. It will also grow to maintain existing radars in-service with the UK Ministry of Defence, such as Giraffe 1X and Giraffe AMB air defence radars and artillery locating MAMBA (Arthur) radars.

Saab UK’s Fareham site has been growing with the announcement in February 2023 of the expansion of its Underwater Systems business of Seaeye autonomous and remotely operated vehicles. Across the UK, Saab has eight principal sites which focus on software engineering, underwater robotics, training services, radars and more.

Saab UK’s presence has been growing at pace, with employee numbers quadrupling through consolidation, acquisition and organic growth, bringing together the best of Swedish and British innovation.

The whole site in Fareham benefits 400 jobs at Saab, in established and future roles across various business activities.

 

 

Airbus opens new A321XLR equipment installation hangar

Hamburg, Germany, August 30, 2023 – Airbus (OTC: EADSY) is advancing its industrial system and expanding ramp-up capacity with a new automated A321XLR equipping hangar, officially opened today by Hamburg’s First Mayor Peter Tschentscher and German Aerospace Coordinator Anna Christmann. With this, Airbus continues its modernisation and digitalisation of its industrial system and expands its capacity for the rate ramp-up in the A320 programme to 75 in 2026.

Hamburg, 30 August 2023 – Airbus is advancing its industrial system and expanding ramp-up capacity with a new automated A321XLR equipping hangar, officially opened today by Hamburg’s First Mayor Peter Tschentscher and German Aerospace Coordinator Anna Christmann. With this, Airbus continues its modernisation and digitalisation of its industrial system and expands its capacity for the rate ramp-up in the A320 programme to 75 in 2026.

“Airbus’ Hamburg site plays a significant role in the development and production of the A321XLR. With our new, state-of-the-art equipment installation hangar, we are now expanding our capacity to manufacture A321 fuselages and making an important contribution to supporting our ramp up. At the same time we are reaffirming the importance of Hamburg for Airbus,” said André Walter, Head of Airbus Commercial Aircraft Production in Germany. “The design of the building reflects the latest standards in production and sustainability.”

Dr Peter Tschentscher, First Mayor of the Free and Hanseatic City of Hamburg: “Hamburg is the central location for Airbus’ single-aisle development and production. With the A321XLR, the new flagship of the A320 Family will be assembled at the Finkenwerder site, setting new standards in terms of sustainability, efficiency and range. The start of production in the new equipment installation hangar is an important project for Hamburg as the world’s third largest civil aviation center.”

“This investment in the A321XLR equipment installation hangar at the Airbus Hamburg site is an important milestone towards transitioning aviation to climate neutrality. This transformation is the key to making Germany a future-oriented and competitive aerospace location,” said Anna Christmann, the Federal Government Coordinator of German Aerospace Policy. “I am delighted that Airbus is positioning itself as a trailblazer in sustainable aviation and that we are pulling together to accelerate progress toward climate-neutral aviation even further.”

In the new equipment installation hangar, with 9,600 m2 of production space, designated H259, all the components of the rear fuselages of the A321XLR aircraft – also built in Hamburg – will be installed and mounted. The hangar is equipped with a full range of state-of-the-art technologies for operations and manufacturing, such as automated logistics, fully digital systems, and test stations that can output the status of each fuselage section (both in terms of logistics and resources) at any time. The almost 24-metre-long fuselage sections are equipped with all electrical and mechanical systems, as well as other elements such as windows, floor panels or external antennas, on an automated ‘pulse line’ consisting of eight stations. Each fuselage section is extensively tested directly after the installation of the systems. The fuselage sections are then transferred to the final assembly line in Hamburg.

The stations in the new hangar were planned in close consultation with the employees to create both an efficient production flow and an ergonomically optimised and modern working environment. In addition, the interior design also focused on ensuring optimal conditions for cooperation between the employees in production and the supporting functions.

The structure was planned and built sustainably. A 3,000 m2 photovoltaic system on the roof supplies the hangar with electricity, and surpluses are used to power the site. The office block on the south side offers an excellent level of insulation thanks to extensive insulation of the ceiling and walls. A fully automatic control system for heating, ventilation and lighting complements the measures.

RTX Collins Aerospace opens $14 million manufacturing expansion in West Des Moines, Iowa

West Des Moines, Iowa, July 20, 2023 /PRNewswire/ – Collins Aerospace, an RTX (NYSE: RTX) business, today celebrated the opening of a $14 million expansion of its additive manufacturing center in West Des Moines, Iowa. The 9,000-square-foot addition provides space for the site to house several new state-of-the-art 3D metal printers. The first printer installed has eight times the build volume of the facility’s existing printers, significantly increasing the center’s additive manufacturing capabilities.

The West Des Moines facility is a world leader in the design and production of engine components for commercial and military aircraft. The new printers will allow the site to explore additive production of these components, building on the multiple land-based turbine components it already has in production. Additionally, the facility is one of only eight in the U.S. to receive the National Aerospace and Defense Contractors Accreditation Program (NADCAP) certification for Additive Manufacturing.

Additive manufacturing is a critical focus area for Collins and the business maintains a global network of additive production centers in Iowa, Minnesota, North Carolina and Singapore, along with an additive research center in Connecticut.

An Airbus A330 operated by Air China takes off from Shanghai airport

DHL EXPRESS OPENS NEW $84.5M HUB IN ATLANTA

DHL (OTC: DHLGY) Express, the world’s leading provider of express shipping services, has announced the grand opening of its Americas region hub based at the Hartsfield-Jackson Atlanta International Airport (ATL). With a focus on sustainability, the $84.5 million investment further strengthens the company’s connections and service capabilities between the U.S. and key global markets, increasing capacity, speeding transit times, and adding resilience to its network.

Spanning 100,000 square feet, the state-of-the-art hub establishes direct connections between 19 cities in the Southeastern U.S. and key global markets, including Europe and major DHL hubs worldwide. Future plans involve adding flight connections to Hong Kong, Mexico, the UK, and Puerto Rico.

The DHL Atlanta Hub also sets new standards for sustainability, generating up to 50% of its on-site energy consumption through 65,000 sq. ft of rooftop solar panels, preventing the release of 380 metric tons of CO2 emissions annually. The remaining energy consumed on-site is sourced from renewable sources through Renewable Energy Certificates (RECs), guaranteeing zero emissions from electricity consumption. Moreover, the hub employs environmentally conscious features such as LED lights, electric forklifts, dock seals, and rapid rise doors, further minimizing its environmental impact.

The Atlanta hub operates as a fully automated facility, equipped with cutting-edge technology capable of sorting up to 20,000 pieces per hour. To ensure swift clearance of DHL customer shipments, the hub employs in-house Customs brokers and collaborates with on-site U.S. Customs and Border Protection personnel. Additionally, DHL implements advanced threat detection and security screening technologies, effectively preventing the entry of illegal and hazardous commodities into its network.

Embraer Opens an Office in Hungary

Embraer announced today the opening of an office in Budapest, the capital of Hungary. The main objective is to foster cooperation in Hungary, which could result in future developments under new partnerships. The office also creates an administrative hub for projects development in Central and Eastern Europe.

This initiative is part of Embraer’s strategy to establish new partnerships in select markets. Some of the key aspects of this future cooperation are the collaborative efforts with new partners, long-term projects, and investment in reliable dual-use technology.

The office will employ Hungarian personnel, administrative and engineering staff that will work in close cooperation with Embraer’s teams in Brazil.

Lockheed Martin Opens Orion Spacecraft Advanced Manufacturing Facility

TITUSVILLE, Florida, July 15, 2021 /PRNewswire/ — Lockheed Martin [NYSE: LMT] opened its Spacecraft Test, Assembly and Resource (STAR) Center today. The STAR Center features business and digital transformation innovations that will expand manufacturing, assembly and testing capacity for NASA’s Orion spacecraft program and ultimately, future space exploration.

Lockheed Martin currently assembles the Orion spacecraft for the Artemis I and II Moon missions at the nearby Neil Armstrong Operations and Checkout (O&C) building at NASA’s Kennedy Space Center. The addition of the STAR Center provides much-needed space for the new production phase of Orion, allowing future Orion spacecraft – starting with the Artemis III mission – to be built faster.

Lockheed Martin acquired the building that formerly housed the Astronaut Training Experience attraction and spent 18 months and nearly $20 million renovating and modernizing the 55,000 square-foot space into a digitally-transformed factory of the future.

Lufthansa Finally Re-opens First Class Lounge at Frankfurt Airport

Starting on 1 June, Lufthansa will be welcoming guests to the First Class Lounge again

Further lounges to open gradually over the next few weeks

As summer approaches, the desire to travel continues to grow: Declining infection rates and the easing of travel restrictions are making more people want to fly again. In response to the rising booking figures, Lufthansa is using this as an opportunity to reopen the Lufthansa First Class Lounge in Terminal 1 of Frankfurt Airport starting on 1 June.

Relaxing while waiting for departure

The lounge offers an exclusive and comfortable place to relax, while travelers are waiting for their departure. The range of products offered in the lounges have been adjusted to meet current regulations. At present, food and beverage consumption is only permitted outside of the lounge. A take-away offer is available in the First Class Lounge, with a good selection of food and beverages. The popular “á la carte” service will also be resumed as soon as official regulations allow us to do so.

First Class guests can now also enjoy the usual personal service. The First Class Lounge is open daily from 6 a.m. to 9:30 p.m.

Lufthansa lounges open their doors to guests

Lufthansa guests can already access some of the lounges in Germany as well as abroad, such as New York. In the upcoming weeks, additional Lufthansa lounges will gradually be re-opening for customers. Soon, the First Class Terminal and the associated limousine service will also be made available again. A variety of measures, such as maintaining distance and wearing a mouth and nose covering, ensure that the lounge stay meets high safety and hygiene standards.

For more information on lounges and on-site conditions, visit https://www.lufthansa.com/de/en/lounges

Virgin Australia Opens Lounge of the Future

Virgin Australia has today revealed its Lounge of the future, with the opening of its highly anticipated Adelaide Airport Lounge. Designed by Brisbane’s WMK Architecture, the 283-seat Adelaide Lounge completes Virgin Australia’s network of seven domestic lounges across major airports around Australia. All future Lounge refurbishments around the domestic network will be done in line with this new and fresh design thinking.

The Lounge is true to the Virgin Australia brand, creating a warm, authentic and inviting environment for frequent flyers.

The contemporary design includes a breeze block feature wall upon entry, with canopy ceilings, before ceramic tiling leads guests into a large light-filled space, with the centre walkway leading guests to numerous dining and seating areas. Ambient lighting, bright greenery and Australian sustainable furniture completes the Lounge, making it a relaxed, inviting and uncomplicated place, to refresh and recharge in a delightfully Virgin way.

Virgin Australia CEO Jayne Hrdlicka said the new lounge was the first of many new and exciting products for customers following the airline’s re-launch.

Adelaide Lounge features

The Coffee Bar: An eye-catching central café seating area, transforming from a place to unwind over a coffee during the day, turning into a wine bar at night.

The Cellar Door Hub: With some of Australia’s most awarded wineries on the doorstep of Adelaide Airport, Virgin Australia has created a feature space for South Australian wineries to bring their cellar door to the Lounge for seasonal wine tasting.

Distinct dining areas: Separate dining areas with diverse functionality have been built adjacent to servery areas to cater to all guest’s eating preferences, including large social tables, and banquette seating for more private dining.

« Older posts