Tag: Ouen

Alstom Delivers its First Series Electric Bus to Strasbourg

January 31, 2020 / WIL BALDWIN

Alstom is delivering the very first 100% electric Aptis bus to Strasbourg transport operator Compagnie des Transports Strasbourgeois (CTS). This constitutes a major new step for Alstom, which aims to be the most innovative world actor for sustainable, smart mobility. Following the groundbreaking delivery, CTS will train 150 drivers in the operation of the new vehicles. During this initial training phase, the bus will run on the streets of Strasbourg with the livery that the Aptis fleet will adopt when in high-level service on the H line. With a length of 12 metres and equipped with 3 doors, Aptis buses were designed at the Hangenbieten Eurométropolis. They are the first electric buses to join CTS’s fleet of vehicles.

Thanks to its innovative design, Aptis offers an unparalleled passenger experience. Its berthing system for perfect alignment with the pavement, its low, completely flat floor and wide double doors allow easy movement and convenient boarding for people with reduced mobility and prams. Equipped with large bay windows along its entire length, Aptis offers 25% more glass surface area than a standard bus and a rear seating area with panoramic views of the city.

The vehicles requested by the city of Strasbourg are designed for slow charging at night at the depot. Aptis is also available for occasional recharging at the end of each line, using either ground-based charging solutions (SRS) or pantograph charging. Aptis was designed to have an optimised total cost. This is possible thanks to reduced maintenance and operating costs and a longer service life than that of standard buses. The aim for local authorities, therefore, is to have a total cost equivalent to that of existing standard diesel buses.

Aptis was also chosen by RATP and Île-de-France Mobilités, and by the areas of Greater Grenoble, Greater La Rochelle, and Greater Toulon, where commercial operations are due this year. As of September 2018, Aptis is also referenced by the CATP for public purchasing by local authorities. This referencing allows member authorities to order Aptis vehicles directly and simply from the CATP without having to embark on long and costly procedures.

Aptis also received the Origine France Garantie in January 2019. The certificate guarantees that at least 50% of Aptis’s value is French.

Design, production and testing will be carried out at Aptis Alstom’s site of Hangenbieten, in Alsace. Six other Alstom sites in France are involved in the design and manufacture of Aptis: Reichshoffen for the flanks, Saint-Ouen for the system integration, Tarbes for the traction, Ornans for the motors and Villeurbanne for the electronic components of the traction chain. Finally, Alstom’s site in Vitrolles is developing one of the charging solutions (SRS).

Alstom to Construct the New Metro for the Métropole Aix-Marseille-Provence

November 27, 2019 / WIL BALDWIN

Alstom is to carry out the renewal and automation of Marseille metro for the sum of 430 million euros financed by Métropole Aix-Marseille-Provence. As part of this contract, Alstom will develop, supply and install the operating system and equipment for the automatic operation of the network’s two lines. Alstom will also commission 38 new rubber-tyred metros (4 cars) and modernise all the audiovisual passenger information inside the stations. The new trains are scheduled to enter service in early 2024.

The trains will run in semi-automatic mode with drivers until mid-2025 on line M2 and until 2026 on line M1, before switching to full automation.

“It is a great honour for us to contribute to modernising the mobility offer of Métropole Aix-Marseille-Provence. Our metro experts are already at work on several of our French sites to get started quickly with developments,” says Jean-Baptiste Eyméoud, Senior Vice-President France at Alstom.

The new trains, based on Alstom’s rubber-tyred metro solutions, will incorporate the latest technological developments to increase comfort, availability, accessibility and passenger information, as well as facilitate maintenance.

Each 4-car train, 65 metres long and in “boa”[1] configuration, will be able to carry up to 500 passengers[2]. The sleekly designed trains will feature large bay windows, a highly efficient air conditioning system and modern passenger information systems, providing a pleasant on-board experience. Alstom called on Marseille designers Ora-ïto and Fabien Bourdier for the design and the sound conception of the new trains.

Three designs were proposed to the Metropole Aix-Marseille-Provence, which chose to set up an Internet consultation to give residents the opportunity to give their opinion on the design they would like to see selected.

The new metros for Marseille are environmentally friendly and will be eco-designed, enabling them to be 96% recoverable at the end of their lifespan. They will consume 25% less energy than the metros currently in service, thanks in particular to electric braking (up to 0 km/h), LED lighting and other optimisations.

For the automation system, Alstom will provide its Urbalis 400 solution, already deployed on more than 1,500 kilometres of metro lines worldwide. The Marseille metro will benefit from a proven, continuously improved system (on-board computers equipped with the latest technology, vital computers that are over 99% available, beacon tracker, etc.).

Alstom currently equips 25% of the CBTC[3] metro automations in service (60 lines, including 28 fully automated lines).

In total, more than 400 people in France will work on this project, including more than 60 in Métropole Aix-Marseille-Provence. Jobs will also be generated at our suppliers in France, but also in the Métropole for the installation and deployment of the signalling system.

Alstom will draw on the excellent skills of six of its French sites: Aix-en-Provence for the project management, Valenciennes for the design, interior layout, assembly, tests and validation of the trains, Ornans for the engines, Le Creusot for the bogies, Villeurbanne for the on-board electronics, passenger information, predictive maintenance and signalling system equipment, and Saint-Ouen for the coordination of the artistic design, development and integration of the signalling system.

Alstom to Supply 39 Additional Coradia Polyvalent Trains to the Grand Est Region

October 23, 2019 / WIL BALDWIN

contract worth over 360 million euros in France

22 October 2019 – Alstom will supply 39 additional Coradia Polyvalent trains to the Grand Est region for the sum of approximately 360 million euros[1]. The region had already ordered 40 Coradia Polyvalent trains, of which 36 have already been delivered. Deliveries of these new trains will be staggered between 2022 and 2024.

Firstly, this new order covers 30 trains intended for cross-border circulation in Germany. These 4-car trains, which are dual mode – dual voltage 25 kV / 15 kV and comply with German safety requirements, will run at 160 km/h, serving the German states of Saarland, Rhineland-Palatinate and Baden-Württemberg. The 30 Coradia Polyvalent cross-border trains will offer a first-class zone and an area for bicycles, and will incorporate the new TSI PRM[2] 2014 standard, notably offering more spacious toilets to facilitate movement for passengers with reduced mobility. The first cross-border trains will be delivered at the end of 2023.

Secondly, nine additional Coradia Polyvalent trains, consisting of five 4-car and four 6-car trains, have been added to the existing fleet for domestic connections. These new trains will benefit from the same special features as those already in operation in the Grand Est region.

“Alstom is proud of this new sign of trust from the Grand Est region. The expertise and innovation capacities of our French teams are mobilised to support the region in developing cross-border mobility. This order also contributes to the activity of Alstom’s Reichshoffen site,” says Jean-Baptiste Eyméoud, President of Alstom in France.

Coradia Polyvalent belongs to Alstom’s Coradia range of trains. With its modular architecture, it can be adapted to the requirements of each public transport authority as well as to different types of use: suburban, regional and intercity. It comes in three lengths (56, 72 or 110 metres) and offers optimal comfort to passengers, whatever the length of the journey. The train is both ecological and economical due to its low energy consumption, its compliance with the latest emissions standards in thermal mode and its reduced maintenance costs. Coradia Polyvalent is the first French regional train to comply with all European standards, in particular with regard to access for people with reduced mobility.

To date, 387 Coradia Polyvalent trains have been ordered as part of the contract awarded to Alstom by SNCF in October 2009, including 320 Coradia Polyvalent for Régiolis by 9 French regions and 67 Coradia Liner by the French state, the authority responsible for the country’s TET (intercity) trains. Régiolis has already covered nearly 85 million kilometres in commercial service.

The Coradia Polyvalent train also meets the needs of the export market: 17 trains have been ordered by SNTF (Algeria) and 15 trains by APIX (Senegal).

This is Coradia Polyvalent’s second cross-border application as the region of Auvergne-Rhône-Alpes has ordered 17 Léman Express Coradia Polyvalent trains, to be commissioned on the CEVA cross-border line between France and Switzerland in mid-December 2019.

The manufacturing of Coradia Polyvalent secures more than 4,000 jobs in France for Alstom and its suppliers. Six of Alstom’s 12 sites in France are involved in the project: Reichshoffen for the design and assembly, Ornans for the engines, Le Creusot for the bogies, Tarbes for the traction chains, Villeurbanne for the on-board electronics and signalling products, and Saint-Ouen for the design.

[1] Booked in the second quarter of the current fiscal year

[2] Technical Specifications for Interoperability relating to Persons with Reduced Mobility

Alstom Presents First Aptis Serial Vehicle at Busworld 2019

October 14, 2019 / WIL BALDWIN

14 October 2019 – Alstom will present the first serial vehicle of its Aptis electric bus at Busworld 2019, being held in Brussels from 17 to 23 October. After the four prototypes that have been on the roads of many French and European cities for the past two years, this new design incorporates feedback from passengers and transport operators.

This first serial vehicle is based on an optimised global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers while still offering them more fluidity thanks to large sliding doors.

In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market.

“Alstom and its teams are very proud to be presenting the first series version of Aptis. This concentration of innovations perfectly represents what we always envisaged the production version of the 100% electric mobility solution would be. This clean, green bus, with its elegant design and optimised technical performance, will offer a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Benjamin Bailly, head of Alstom’s electric bus platform.

Aptis has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. Upcoming milestones include ongoing tests in Spain with the ground-based recharge solution SRS and the training of hundreds of drivers in a new driving experience ahead of the first traffic releases, scheduled for the end of the year in Strasbourg.

Manufacturing and testing of Aptis will be carried out at Alstom’s two sites in Alsace. The Hangenbieten site oversees manufacturing of the end modules (driver’s cab and rear lounge). Manufacturing of the central passenger module, final assembly and tests will be carried out at the Reichshoffen site. This scheme will allow serial production from the end of 2019 onwards. Five other Alstom sites in France contribute to the design and manufacture of Aptis: Saint-Ouen for system integration, Tarbes for traction, Ornans for engines, Villeurbanne for electronic components of the traction chain.

In order to complete Alstom’s vison of road electromobility, exhibited alongside Aptis at Busworld will also be SRS, a completely safe, ground-level, conductive, static recharge system allowing the charging of buses along their route or within depots. As a ground-based solution, it eliminates the need for overhead infrastructure in cities, preserving the aesthetics of the urban landscape. In depots, SRS avoids the infrastructure costs associated with overhead charging systems. SRS for e-buses is based on Alstom’s SRS static recharge technology for trams, a proven solution already in operation in Nice, France. It is developed at Alstom’s Vitrolles site.

Alstom Delivers its First Series Electric Bus to Strasbourg

Alstom to Construct the New Metro for the Métropole Aix-Marseille-Provence

Alstom to Supply 39 Additional Coradia Polyvalent Trains to the Grand Est Region

Alstom Presents First Aptis Serial Vehicle at Busworld 2019

Archives