The Qantas Group’s (OTC: QABSY) first Airbus A220 aircraft has started construction, marking a key milestone for the Group as its fleet renewal program ramps up.
The aircraft’s major airframe components, including the centre and rear fuselage, are coming together at Airbus’ production facility in Mirabel, Canada, with the first of 29 aircraft expected to arrive in Australia before the end of the year. As the first A220 to be operated in Australia, the aircraft will undergo regulatory approvals, airport readiness and training activities before it joins the QantasLink fleet in early 2024. QantasLink has also commenced training its pilots to operate the new aircraft.
The next generation A220s will gradually replace QantasLink’s Boeing 717 fleet which operate routes across Australia.
The first QantasLink A220 will operate flights between Melbourne and Canberra, with subsequent aircraft to be deployed to other parts of the regional and domestic network. With double the range of the 717, the A220 is also expected to open up new domestic and short-haul international routes as more aircraft enter the fleet.
With production now in full swing, the Qantas Group is calling on Australians to help name its fleet of new A220s, based around the theme ‘native wildlife’.
From today, Australians can nominate up to six names via a dedicated page on qantas.com. A shortlist will then be released so the public can vote for their favourites before the final names are revealed.
Qantas ran a similar competition to name its Boeing 787 Dreamliner fleet with iconic Australian names in 2017, with more than 10,000 submissions received.
QantasLink CEO John Gissing said the production milestone marked an important step in the renewal of the airline’s fleet.
Chicago Midway Airport – Delta-C&S – Douglas DC-7 (1954)
Standing idle in the Arizona desert, a beloved historic airplane was prepped for its ultimate journey – one final flight back to where it all began. The recently discovered Ship 717, the last remaining Douglas DC-7B – last flown by Delta more than 50 years ago – drew the eye of the Delta Flight Museum as staffers worked with the plane’s owner to return the plane to its Atlanta roots.
During their heyday, Delta’s fleet of 10 DC-7Bs brought luxury to the skies, even including a lounge in the rear of the cabin. With more power and range than its DC-7 counterpart, the DC-7B was outfitted with four Wright Duplex Cyclone R-3350 engines, developed shortly before World War II before being improved and widely adopted in commercial flying. In 1968, as the aviation industry increasingly turned to newer jet engines as the preferred airplane power source, Delta said farewell to our last Douglas DC-7 type aircraft and piston-engine propeller planes – including the DC-6 and Convair 440 series.
Still in prime flying shape after its Delta career, Ship 717 finished its flying career helping to fight fires on the West Coast before enjoying a sunny desert retirement in 2008. When the Delta Flight Museum became aware of the classic plane several years ago, the museum jumped at the opportunity to make the purchase.
In quiet Coolidge, Ariz., where summer temperatures near 110 degrees, mechanics spent days and nights making repairs, running tests, making more repairs, replacing multiple engines and testing all four engines again – all with the goal of making this DC-7B ready to take to the skies for the first time in 11 years. The trip to Hartsfield-Jackson Atlanta International Airport, which included an overnight stop in Midland, Texas, was a flown at 9,500 feet in the now-depressurized aircraft for a combined 6.5 hours in the air.
“Saying goodbye to this beautiful airplane is truly a bittersweet moment for me,” said Woody Grantham, the longtime owner of this DC-7B and the founder of International Air Response. “Even as we fly on some of the latest and greatest new airplanes of today, I think it’s so important that we never lose our touch with history, and I can’t express how happy it makes me to see the DC-7B going home to be celebrated and immortalized at the Delta Flight Museum.”
Touching down in Atlanta at shortly after 5 p.m. EST Sunday and soon to be heading to Delta’s TechOps facility, the final chapter of this DC-7B’s story has yet to be written.
14 October 2019 – Alstom will present the first serial vehicle of its Aptis electric bus at Busworld 2019, being held in Brussels from 17 to 23 October. After the four prototypes that have been on the roads of many French and European cities for the past two years, this new design incorporates feedback from passengers and transport operators.
This first serial vehicle is based on an optimised global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers while still offering them more fluidity thanks to large sliding doors.
In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market.
“Alstom and its teams are very proud to be presenting the first series version of Aptis. This concentration of innovations perfectly represents what we always envisaged the production version of the 100% electric mobility solution would be. This clean, green bus, with its elegant design and optimised technical performance, will offer a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Benjamin Bailly, head of Alstom’s electric bus platform.
Aptis has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. Upcoming milestones include ongoing tests in Spain with the ground-based recharge solution SRS and the training of hundreds of drivers in a new driving experience ahead of the first traffic releases, scheduled for the end of the year in Strasbourg.
Manufacturing and testing of Aptis will be carried out at Alstom’s two sites in Alsace. The Hangenbieten site oversees manufacturing of the end modules (driver’s cab and rear lounge). Manufacturing of the central passenger module, final assembly and tests will be carried out at the Reichshoffen site. This scheme will allow serial production from the end of 2019 onwards. Five other Alstom sites in France contribute to the design and manufacture of Aptis: Saint-Ouen for system integration, Tarbes for traction, Ornans for engines, Villeurbanne for electronic components of the traction chain.
In order to complete Alstom’s vison of road electromobility, exhibited alongside Aptis at Busworld will also be SRS, a completely safe, ground-level, conductive, static recharge system allowing the charging of buses along their route or within depots. As a ground-based solution, it eliminates the need for overhead infrastructure in cities, preserving the aesthetics of the urban landscape. In depots, SRS avoids the infrastructure costs associated with overhead charging systems. SRS for e-buses is based on Alstom’s SRS static recharge technology for trams, a proven solution already in operation in Nice, France. It is developed at Alstom’s Vitrolles site.
