Tag: RTX

Pratt & Whitney expands site at Eagle Services Asia facility in Singapore

February 19, 2024 / WIL BALDWIN

Singapore, February 19, 2024, PRNewswire – (Singapore Airshow) Pratt & Whitney, an RTX (NYSE: RTX) business, today announced the official opening of a 48,000 square-foot expansion of its Singapore based engine center, Eagle Services Asia (ESA). The facility will grow its GTF capacity by two-thirds this year.

The transformative technology insertion applied across both ESA sites integrates robotics, automation and machine learning to increase efficiency, lower stress on machine operators and increase safety for key MRO processes.

These innovations include fully automated high-pressure compressor (HPC) rotor stacking, a Receive-in-Check Cobot that augments the work done by human inspectors and a robotic arm to install and remove HPC bearing sleeves.

ESA, a joint venture between SIA Engineering Company and Pratt & Whitney, is a member of the Pratt & Whitney GTF™ MRO network. Since introducing GTF MRO capability in 2019, the facility has already completed over 500 GTF engine overhauls.

Forward-Looking Statements

This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

RTX Pratt & Whitney receives $355 million F100 engine sustainment contract

February 13, 2024 / WIL BALDWIN

East Hartford, Connecticut, February 13, 2024, PRNewswire – Pratt & Whitney, an RTX (NYSE: RTX) business, was awarded an F100 engine performance-based logistics (PBL) sustainment contract by South Korea’s Defense Acquisition Program Administration (DAPA). This contract, with a base value of $355 million, is the third consecutive PBL contract Pratt & Whitney and DAPA have signed since 2012, offering on-going maintenance support for the Republic of Korea Air Force’s (ROKAF) F-15 Eagles and F-16 Fighting Falcons.

This contract is the latest initiative in an enduring partnership between Pratt & Whitney, DAPA and ROKAF, and it will support more efficient depot planning and improve overall fleet readiness through long-term material forecasting. Sustainment work began in December of 2023 and will run through the second half of 2027.

Forward-Looking Statements

Pratt & Whitney receives contract for TF33 engines powering B-52 and E-3 aircraft

November 16, 2023 / WIL BALDWIN

East Hartford, Connecticut, November, 2023, PRNewswire – Pratt & Whitney, an RTX (NYSE: RTX) business, was awarded a long-term TF33 engine sustainment contract valued up to $870 million by the Defense Logistics Agency. The TF33 engine provides power to a wide range of aircraft, including the Boeing (NYSE: BA) B-52 Stratofortress and E-3 Sentry.

This agreement is a culmination of the Defense Logistics Agency’s decades-long partnership with the 448^thSupply Chain Management Wing, Tinker Air Force Base, Okla., and Pratt & Whitney to establish a holistic sustainment solution. This first-of-its-kind approach will reduce obsolescence, supporting the U.S. Air Force’s wartime readiness today and into the foreseeable future.

Under this contract, Pratt & Whitney will provide comprehensive engine sustainment services for a global fleet of nearly 1,000 engines over a six-year period, with an option of extending for another four years. Services under this contract include maintenance, spare parts, program management, field service, repairs and engineering support.

Sustainment work will run through April 2034 at Tinker Air Force Base, Oklahoma, additional U.S. Air Force locations, and Pratt & Whitney’s Southern Logistics Center located in Atlanta, Georgia.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.

Korean Air now using RTX to improve predictive maintenance

November 8, 2023 / WIL BALDWIN

Collins Aerospace Ascentia^® tool to be installed on Korean Air 787 Fleet

Charlotte, North Carolina, November 8, 2023, PRNewswire – Collins Aerospace, an RTX business (NYSE: RTX), announced today that its Ascentia^® Prognostic and Health Management (PHM) solution has been selected by Korean Air Lines Co. (Seoul: 003490) for use on its growing Boeing (NYSE: BA) 787 fleet.

The cloud-based solution uses advanced data analytics and machine learning algorithms to help airlines improve maintenance operations and increase aircraft reliability. Analyzing flight data and maintenance records in real-time allows Ascentia to help predict potential maintenance issues and provide recommendations for corrective actions, improving aircraft availability and reducing unscheduled downtime.

Collins Aerospace’s Ascentia solution is currently in use by several major airlines around the world. Equipping KAL’s Boeing 787 fleet with Ascentia represents a significant milestone as Collins Aerospace expands its presence in the Asia-Pacific region.

Forward-Looking Statements

RTX, Rafael plan new missile production facility in Camden, Arkansas

October 26, 2023 / WIL BALDWIN

East Camden, Arkansas, October 26, 2023, PRNewswire – Raytheon, an RTX (NYSE: RTX) business, in partnership with Rafael Advanced Defense Systems, will build a manufacturing facility in East Camden, Arkansas to produce the Tamir missile for the Iron Dome Weapon System and its U.S. variant, SkyHunter^®.

Through the established Raytheon-Rafael Area Protection Systems joint venture, the companies have committed to a $33 million capital investment to establish the new facility. Once operational, the facility will produce missiles for the U.S. Marine Corps and other allied partners.

Raytheon and Rafael have teamed for over a decade on Iron Dome, which has more than 5,000 operational intercepts and a success rate exceeding 90%. The U.S. version of the Iron Dome Weapon System’s Tamir, SkyHunter, is a medium-range air defense weapon designed to counter a range of threats, including cruise missiles, manned and unmanned aircraft, rockets, artillery and mortars. SkyHunter missiles will be produced for the U.S. Marine Corps Medium Range Intercept Capability, or MRIC, program.

The joint venture plans to break ground on the new facility before the end of the year with the intent to begin missile production in 2025.

RTX Collins Aerospace opens $14 million manufacturing expansion in West Des Moines, Iowa

July 22, 2023 / WIL BALDWIN

West Des Moines, Iowa, July 20, 2023 /PRNewswire/ – Collins Aerospace, an RTX (NYSE: RTX) business, today celebrated the opening of a $14 million expansion of its additive manufacturing center in West Des Moines, Iowa. The 9,000-square-foot addition provides space for the site to house several new state-of-the-art 3D metal printers. The first printer installed has eight times the build volume of the facility’s existing printers, significantly increasing the center’s additive manufacturing capabilities.

The West Des Moines facility is a world leader in the design and production of engine components for commercial and military aircraft. The new printers will allow the site to explore additive production of these components, building on the multiple land-based turbine components it already has in production. Additionally, the facility is one of only eight in the U.S. to receive the National Aerospace and Defense Contractors Accreditation Program (NADCAP) certification for Additive Manufacturing.

Additive manufacturing is a critical focus area for Collins and the business maintains a global network of additive production centers in Iowa, Minnesota, North Carolina and Singapore, along with an additive research center in Connecticut.

An Airbus A330 operated by Air China takes off from Shanghai airport

Collins Aerospace to Providing Passenger Service Units for Airbus A320 Family Airspace Cabin

June 6, 2021 / WIL BALDWIN

Collins Aerospace, a unit of Raytheon Technologies Corp. (NYSE: RTX), has been selected by Airbus (OTC: EADSY) to supply upgraded passenger service units (PSU) for the delivery of the new A320 Family Airspace cabin. The advanced architecture and sleek new design fits seamlessly within the new Airspace cabin, supporting a consistent passenger experience across the family of aircraft.

The advanced composite materials of the Collins PSU provide the strength and durability needed to handle each passenger touchpoint, including reading lights, air outlet valves and call attendant lights. The modular design is easily adjustable for a variety of seat pitches, enabling simple installation and removal.

Collins has supplied PSUs for the A320 family of aircraft for more than two decades and is actively working with Airbus to explore future developments and to improve the already outstanding performance of the new passenger service units.

Rolls-Royce Testing Most Powerful Hybrid-Electric Propulsion System

June 5, 2021 / WIL BALDWIN

Rolls-Royce has started testing the first elements of the most powerful hybrid-electric aero power and propulsion system in aerospace at a newly-renovated testbed. The tests are part of the 2.5 megawatt (MW) Power Generation System 1 (PGS1) demonstrator programme, for future regional aircraft.

Rolls-Royce has begun testing the AE2100 engine element and specialist controls and thermal management system, supported by a system integration generator, at our Testbed 108 in Bristol, UK.

Later this year a fully operational generator and a 3,000-volt power electronics system, currently completing testing at our facility in Trondheim, Norway, will be brought together to start full PGS1 system testing. The generator can be used either for hybrid-electric propulsion systems or as part of a “more-electric” system for larger aircraft.

PGS1 forms an important element of our sustainability strategy, which includes developing innovative electrical power and propulsion systems, as well as further improving gas turbine performance and promoting the use of Sustainable Aviation Fuels.

Collins Aerospace and GKN Fokker Services Ink MRO Agreement

October 26, 2020 / WIL BALDWIN

– Expanded FlightSense On-Site Support agreement for Collins Aerospace’s Integrated Drive Generator (IDG) includes new part numbers for Airbus A320neo operators

Collins Aerospace Systems, a unit of Raytheon Technologies Corp. (NYSE: RTX), and Fokker Services, a GKN Aerospace company, today announced the expansion of an existing 10-year FlightSense On-Site Support agreement for Collins Aerospace’s Integrated Drive Generators (IDG’s). The expanded contract will add new IDG part numbers for the Airbus A320neo, while Collins Aerospace will continue to manage Fokker Services’ onsite inventory of IDG components, providing competitive rates for OEM-quality parts and improved shop efficiency. Fokker Services, in turn, will now be able to repair Collins Aerospace IDGs for the A320neo at its Amsterdam Airport Schiphol facilities.

The IDG provides primary electric power for the aircraft electrical system by converting variable engine input speed to a constant output speed, thus enabling the generator portion of the IDG to produce alternating current at a constant frequency.

“Collins Aerospace is pleased to continue building on its longstanding relationship with Fokker Services,” said Ryan Hudson, vice president, Aftermarket, Power & Controls for Collins Aerospace. “This agreement will help Fokker Services streamline supply chain operations, increase repair reliability and lower operational cost to better serve its customers with quality repairs of Collins Aerospace components.”

“As a leading aerospace service provider, we are proud to work with Collins Aerospace to provide MRO support for these components to operators,” said Ben Scharrenberg, director, Procurement for Fokker Services. “We bring added value based on many years of experience in supporting component MRO, our high quality standards including FAA, EASA and CAAC approvals, and our service expertise. We look forward to supporting our customers and to further expanding our relationship as Collins Aerospace’s channel partner.”

As part of the contract, Fokker Services will support airlines, MROs and Integrators with flexible, reliable and competitive OEM solutions for Collins Aerospace IDGs. The support includes:

– OEM parts & warranty

– Dedicated 24/7 customer service representative

– Quick Turn-Around-Time and performance guarantee

– Reliability monitoring services to ensure top quality

– Exchange inventory available to support the next removal

Collins Aerospace to Provide Army with Anti-Jam Technology

October 13, 2020 / WIL BALDWIN

– The highest anti-jamming and anti-spoofing PNT technology providing access and trusted data for success of critical missions

Collins Aerospace Systems, a unit of Raytheon Technologies Corp. (NYSE: RTX), has been selected to provide Mounted Assured Positioning, Navigation and Timing System (MAPS Gen II) for manned and unmanned ground vehicles to combat Positioning, Navigation and Timing (PNT) threats.

MAPS II provides a high-assurance, accurate navigation solution across GPS threat environments with industry-leading NavFusion of multiple sensors and is interoperable with the Collins Aerospace PRC-162 manpack radio to ensure mission success in the Joint All Domain Command and Control (JADC2) battlespace.

Its advanced anti-spoofing and anti-jamming technology addresses evolving enemy threats and technologies. The warfighter can navigate through high threat environments with the confidence of knowing where they are, where they need to go, at the precise time with weapons on target.

Leveraging Collins Aerospace’s NavHub™-100 navigation system and Multi-Sensor Antenna System (MSAS-100), this navigation capability distributes Assured Position, Navigation and Timing (APNT) information to all systems onboard the platform through one device. The MAPS Gen II system includes Military Code (M-Code) capability and improved levels of reliability through patented Modernized Signal Tracking (MST) that enhances GPS integrity. Additionally, the open architecture, modular, and scalable technology lets the Army add additional sensors and capability with a much lower life-cycle cost, such as alternative Radio Frequency (RF) and Line of Bearing (LOB).

“Building upon our expertise in open architecture and NavFusion, this modular, and scalable system helps the warfighter keep pace with evolving threats and technologies. They can confidently know their location and destination at the precise time with weapons on target,” said Ryan Bunge, vice president and general manager, Communication, Navigation and Guidance Solutions for Collins Aerospace.

Archives