Botucatu, Brazil, January 15, 2024 — Embraer SA (ADR-NYSE: ERJ) Agricultural Aviation Division delivered 65 Ipanema airplanes in 2023, an increase of 18% compared to the previous year. As a result, in December, the company reached the milestone of 1,600 units produced and delivered over the aircraft’s five decades of uninterrupted production.
Since the launch of the new version of the EMB-203 model in 2020, the company has seen continuous growth in sales and plans to increase production to 70 planes this year.
As the leader in the Brazilian aerial applications market, the Ipanema brings innovations and improvements that increase robustness with low operating costs and carbon emissions. The Ipanema is the only agricultural airplane certified and produced in series to fly on ethanol, a renewable energy source that provides increased power to the aircraft’s engine.
Forward-Looking Statements
This press release may contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including expected delivery dates. Such statements are based on current expectations and projections about our future results, prospects and opportunities and are not guarantees of future performance. Such statements will not be updated unless required by law. Actual results and performance may differ materially from those expressed or forecasted in forward-looking statements due to a number of factors, including those discussed in our filings with the Securities and Exchange Commission.
HEATH, Ohio, Feb. 8, 2021 — Boeing (NYSE: BA) will continue to provide the U.S. Air Force with guidance and navigation repair work on a variety of aircraft under a 5-year, $91 million sole-source contract.
The company has serviced components for aircraft including the B-2 Spirit, B-52 Stratofortress, E-3 Sentry and F-15 Eagle at the Boeing Guidance Repair Center in Heath, Ohio, since 1996.
The Boeing Guidance Repair Center is responsible for maintaining the readiness and modernization of guidance and navigation systems for U.S. nuclear-capable platforms, as well as non-nuclear capable guidance and control systems, electronics and radio frequency systems, and platform processors. In addition, the center is home to assembly, integration and test activities for several Boeing production programs, including the KC-46 tanker, T-7A Red Hawk and the MQ-25 unmanned aircraft system.
PHOENIX, March 8, 2021 /PRNewswire/ — Honeywell (NYSE: HON) announced it is developing a power source for hybrid-electric aircraft, planned for demonstration later this year. At 280 pounds, the Honeywell 1-Megawatt generator weighs about the same as a motor scooter but delivers enough energy to power an entire neighborhood block. This generator will be combined with the Honeywell HGT1700 auxiliary power unit, currently flown on every Airbus A350 XWB, to form a turbogenerator 2.5 times more powerful than the version the company unveiled in 2019.
The new turbogenerator from Honeywell will be able to run on aviation biofuel, including Honeywell Green Jet Fuel, which is chemically similar to fossil fuel but made from more sustainable alternatives, as well as conventional jet fuel and diesel. Honeywell’s turbogenerator can be used to operate high-power electric motors or charge batteries and can satisfy missions from heavy-lift cargo drones to air taxis, or commuter aircraft. The first demonstration of this turbogenerator system will occur in the third quarter of 2021, with ongoing development and qualification to follow.
Traditionally, aircraft use fuel-burning engines to mechanically turn rotors, propellers or fans. Many new designs, however, use a distributed electric propulsion architecture, in which many electric motors can be tilted or turned off for vertical takeoff and horizontal flight. A Honeywell turbogenerator can provide electric power for multiple electric motors anywhere on an aircraft.
In December, Honeywell signed a memorandum of understanding with British startup Faradair Aerospace to collaborate on systems and a turbogeneration unit that will run on sustainable aviation fuel to power Faradair’s Bio Electric Hybrid Aircraft (BEHA). Faradair intends to deliver 300 hybrid-electric BEHAs into service by 2030, of which 150 will be in a firefighting configuration. Honeywell is in advanced discussions with several other potential turbogenerator customers, working to help define power requirements based on mission profiles required by various manufacturers.
Honeywell unveiled its first turbogenerator for urban air mobility (UAM) at the 2019 HAI HELI-EXPO in Atlanta. It combined Honeywell’s HTS900 turboshaft engine with two 200-kilowatt generators. Since then, the company continues to grow its role in the UAM segment, highlighted by advancements in electric and hybrid-electric propulsion systems.
Honeywell is a major player in the emerging UAM segment, offering a full line of avionics, propulsion and operational systems—all tailored for piloted and autonomous vertical take-off and landing UAM and cargo vehicles. Honeywell also offers aerospace integration and certification expertise for enabling the commercialization of these vehicles.
Honeywell pioneered the sustainable aviation fuel market with its UOP Ecofining process. Honeywell Green Jet Fuel produced by this process is blended seamlessly with petroleum-based jet fuel at commercial scale. When used in up to a 50% blend with petroleum-based jet fuel, Honeywell Green Jet Fuel requires no changes to aircraft technology and meets all critical specifications for flight.
Garmin is pleased to announce European Aviation Safety Agency (EASA) approval of an Automatic Dependent Surveillance-Broadcast (ADS-B) solution for the Dornier 328 jet and turboprop aircraft. SUN-AIR Aviation Group has selected a Garmin ADS-B solution for their entire fleet of 18 Dornier 328 aircraft that utilizes a Supplemental Type Certificate (STC) and “plug and play” installation kit from their certification partner Scandinavian Avionics, headquarters of The SA Group. This cost-effective Garmin ADS-B upgrade provides operators with an economical solution for complying with the ADS-B mandate in Europe.
“Garmin continues to lead the industry on a global scale with a broad range of ADS-B solutions that span all segments of aviation, including a wide-range of commercial, defense, regional and business aircraft,” said Carl Wolf, vice president of aviation sales and marketing. “We are thrilled to provide SUN-AIR with a technology solution that is cost-effective, easy to install and keeps them flying so they can continue to serve their valued customers.”
The ADS-B upgrade for the Dornier 328 is comprised of a pair of GTX 3000 ADS-B transponders and a GPS 3000, a high-integrity SBAS/WAAS position source, and a complete installation kit comprised of a pre-wired shelf, wire harness and consumption material. This solution is designed to easily interface to existing equipment on board the aircraft, reducing installation time and lowering the overall cost of compliance. Together, the GTX 3000 and GPS 3000 serve as a rugged, standalone ADS-B Out solution that meets the stringent demands of transport category aircraft around the globe.
“This Garmin ADS-B solution is an ideal upgrade for our aircraft because the installation design supports an abbreviated maintenance visit,” Kristoffer Sundberg, CEO SUN-AIR airlines. “For our workhorse fleet of aircraft, efficiency and minimal aircraft downtime are key, and Garmin and Scandinavian Avionics have addressed this with a straightforward upgrade.”
Designed by Scandinavian Avionics, the STC and slide-in rack contains all of the necessary Garmin equipment and paperwork for the ADS-B Out solution. Scandinavian Avionics has completed the initial installation on a prototype aircraft and expects to complete the upgrade on the entire SUN-AIR fleet in the coming months.
“Alongside Garmin, we have designed this STC so that Dornier 328 operators can take advantage of the installation efficiencies this upgrade affords,” said Michael Truelsen, CEO Scandinavian Avionics. “We look forward to continuing to work with Garmin to expand the aircraft eligibility list for this all-in-one, turn-key solution.”
The GTX 3000 and GPS 3000 Garmin ADS-B Out solution for the Dornier 328 has received EASA approval and is available immediately. For additional information regarding the STC, contact SUN-AIR or Scandinavian Avionics. Visit www.garmin.com/aviation for additional information.
(Reuters) – JetBlue Airways Corp on Monday said it plans to become carbon neutral on all domestic flights by July 2020 and would use an alternative fuel source for flights leaving from San Francisco amid rising pressure to cut greenhouse emissions.
The aviation industry has been trying to combat climate change by trying to cut its greenhouse gas emissions in half by 2050 compared with 2005 levels and sees the emergence of lower-carbon biofuels as a vital step towards meeting this goal.
The industry’s plan rests on a mix of alternative fuel, improved operations such as direct flight paths, new planes and other technologies.
JetBlue in its attempt to reduce greenhouse gas emissions will favor renewable sources and will start using sustainable aviation fuel in mid-2020 on flights from San Francisco International Airport.
“By offsetting all of our domestic flying, we’re preparing our business for the lower-carbon economy that aviation – and all sectors – must plan for,” Chief Executive Officer Robin Hayes said in a statement.
JetBlue declined to give details about the cost of the exercise. It did not disclose if any other airports will be a part of the plan to reduce greenhouse gas emissions.
Sustainable-fuel, derived from sustainable oil crops or from wood and waste biomass, would have the single largest impact in reducing emissions from each flight by around 80%, but is in short supply, according to the International Air Transport Association (IATA).
(Reporting by Sanjana Shivdas in Bengaluru; Editing by Amy Caren Daniel and Aditya Soni)
A JetBlue aircraft comes in to land at Long Beach Airport in Long Beach
MILAN (Reuters) – Italian tax authorities believe that Fiat Chrysler Automobiles <FCAU> underestimated the value of its U.S. business by 5.1 billion euros following Fiat’s phased acquisition of Chrysler, according to a company filing and a source close to the matter.
The audit, which concerns transactions dating back to 2014, could result in FCA having to pay back taxes for $1.5 billion, the source added, confirming a report by Bloomberg.
FCA said in its third-quarter report that the tax authorities had issued to the company a final audit report in October this year “which, if confirmed in the final audit assessment, could result in a material proposed tax adjustment related to the October 12, 2014 merger of Fiat SpA into FCA NV.”
It said the issuance of a final audit report starts a 60-day negotiation period, which ends with the issuance of a final audit assessment expected to be received by the end of December 2019.
“The company believes that its tax position with respect to the merger is fully supported by both the facts and applicable tax law and will vigorously defend its position,” it said in the third-quarter report.
A spokesman for Italy’s tax agency declined to comment.
“At this time, we cannot predict whether any settlement may be reached or if no settlement is reached, the outcome of any litigation. As such, we are unable to reliably evaluate the likelihood that a loss will be incurred or estimate a range of possible loss,” Fiat said.
News of the tax probe comes at a delicate time for Fiat Chrysler, which is finalizing talks with PSA, the maker of Peugeot and Citroen, over a planned $50 billion merger to create the world’s fourth-largest automaker.
(Reporting by Silvia Aloisi in Milan; Editing by Anil D’Silva)
Chicago Midway Airport – Delta-C&S – Douglas DC-7 (1954)
Standing idle in the Arizona desert, a beloved historic airplane was prepped for its ultimate journey – one final flight back to where it all began. The recently discovered Ship 717, the last remaining Douglas DC-7B – last flown by Delta more than 50 years ago – drew the eye of the Delta Flight Museum as staffers worked with the plane’s owner to return the plane to its Atlanta roots.
During their heyday, Delta’s fleet of 10 DC-7Bs brought luxury to the skies, even including a lounge in the rear of the cabin. With more power and range than its DC-7 counterpart, the DC-7B was outfitted with four Wright Duplex Cyclone R-3350 engines, developed shortly before World War II before being improved and widely adopted in commercial flying. In 1968, as the aviation industry increasingly turned to newer jet engines as the preferred airplane power source, Delta said farewell to our last Douglas DC-7 type aircraft and piston-engine propeller planes – including the DC-6 and Convair 440 series.
Still in prime flying shape after its Delta career, Ship 717 finished its flying career helping to fight fires on the West Coast before enjoying a sunny desert retirement in 2008. When the Delta Flight Museum became aware of the classic plane several years ago, the museum jumped at the opportunity to make the purchase.
In quiet Coolidge, Ariz., where summer temperatures near 110 degrees, mechanics spent days and nights making repairs, running tests, making more repairs, replacing multiple engines and testing all four engines again – all with the goal of making this DC-7B ready to take to the skies for the first time in 11 years. The trip to Hartsfield-Jackson Atlanta International Airport, which included an overnight stop in Midland, Texas, was a flown at 9,500 feet in the now-depressurized aircraft for a combined 6.5 hours in the air.
“Saying goodbye to this beautiful airplane is truly a bittersweet moment for me,” said Woody Grantham, the longtime owner of this DC-7B and the founder of International Air Response. “Even as we fly on some of the latest and greatest new airplanes of today, I think it’s so important that we never lose our touch with history, and I can’t express how happy it makes me to see the DC-7B going home to be celebrated and immortalized at the Delta Flight Museum.”
Touching down in Atlanta at shortly after 5 p.m. EST Sunday and soon to be heading to Delta’s TechOps facility, the final chapter of this DC-7B’s story has yet to be written.
(Reuters) – Fiat Chrysler and Peugeot owner PSA are in talks to combine in a deal that could create a $50 billion (£38.88 billion) automaker, a source familiar with the matter said on Tuesday.
Fiat Chrysler shares rose sharply after news of the talks and ended up more than 7.5% in U.S. trading. The companies and the French government had no comment.
The Wall Street Journal first reported the discussions. PSA’s supervisory board was due to meet on Wednesday to discuss the potential merger, another source close to the matter said.
If a combination of Peugeot and Fiat Chrysler succeeded in overcoming political, financial and governance hurdles, the new enterprise would still face substantial challenges. Global automakers face the prospect of a slowdown in global demand coinciding with the most dramatic technology changes in a century.
Peugeot Chief Executive Carlos Tavares has predicted “ten years of chaos” for global automakers as regulators demand a switch to electric vehicles to reduce emissions linked to climate change.
Investors have speculated for several years that Fiat Chrysler was hunting for a merger partner, encouraged by the rhetoric of the company’s late chief executive, Sergio Marchionne.
In 2015, Marchionne outlined the case for consolidation of the auto industry and tried unsuccessfully to interest General Motors Co in a deal. Fiat Chrysler earlier this year broached a merger with French automaker Renault SA that ultimately collapsed.
Created when Fiat, under Marchionne’s leadership, bought control of Chrysler out of a U.S. government-backed bankruptcy in 2009, Fiat Chrysler has one of the global auto industry’s most profitable franchises in the Jeep sport utility vehicle brand and a money-spinning North American pickup and commercial van operation in Ram. Both would boost Peugeot, which does not sell vehicles in the U.S. market.
Peugeot and Fiat Chrysler could over time share engines and vehicle architectures, reducing capital spending and freeing up cash to invest in electric vehicles and emissions reduction technology required in Europe, China and other global markets.
Fiat Chrysler is under increasing pressure to invest in clean car technology. The company disclosed earlier this month that it faces a $79 million fine for falling short of U.S. fuel efficiency standards. Fiat Chrysler agreed to pay U.S. electric car maker Tesla Inc for credits to help it comply with European emissions standards until 2022.
Evercore analyst Arndt Ellinghorst in a note on Tuesday said a combination of Fiat Chrysler and Peugeot “should ignite more rational industry behavior around allocation of capital and this particular merger makes materially more sense than a potential FCA-Renault merger.”
Peugeot and Fiat Chrysler had discussed a combination earlier this year, before Fiat Chrysler proposed a $35 billion merger with Renault. At that time, Fiat Chrysler said a deal with Renault offered more advantages than a combination with Peugeot.
Fiat Chrysler Chairman John Elkann broke off talks with Renault in June after French government officials intervened and pushed for Renault first to resolve tensions with its Japanese alliance partner, Nissan Motor Co.
Following the collapse of the Renault merger plan, Fiat Chrysler CEO Mike Manley left the door open for talks with would-be partners. But he said the Italian-American automaker could go it alone despite mounting costs to develop electric vehicles and comply with tougher emissions rules in Europe, the United States and China.
Along with Jeep and Ram would come Fiat’s Italian operations, which have struggled in recent years. Fiat’s Mirafiori assembly complex in its home city of Turin has run below 50% capacity, with thousands of workers on temporary layoffs.
Overall, Fiat has 58,000 workers in Italy, where the government has long resisted mass lay-offs by large employers.
Peugeot’s Tavares dismissed the idea of a combination with Fiat Chrysler during a discussion with reporters at the Frankfurt auto show last month. “We don’t need it,” he said when asked whether he was still interested in a deal with Fiat Chrysler.
Tavares has moved aggressively to expand Peugeot, acquiring German auto brand Opel from General Motors Co for $2.6 billion in 2017. Since then, he has overseen a turnaround at Opel.
Fiat Chrysler already has a commercial vehicle partnership with Peugeot.
(Reporting by Dominic Roshan K.L. in Bengaluru; Editing by Maju Samuel, Richard Chang and Dan Grebler)
