Tag: Toulon

Alstom Delivers its First Series Electric Bus to Strasbourg

January 31, 2020 / WIL BALDWIN

Alstom is delivering the very first 100% electric Aptis bus to Strasbourg transport operator Compagnie des Transports Strasbourgeois (CTS). This constitutes a major new step for Alstom, which aims to be the most innovative world actor for sustainable, smart mobility. Following the groundbreaking delivery, CTS will train 150 drivers in the operation of the new vehicles. During this initial training phase, the bus will run on the streets of Strasbourg with the livery that the Aptis fleet will adopt when in high-level service on the H line. With a length of 12 metres and equipped with 3 doors, Aptis buses were designed at the Hangenbieten Eurométropolis. They are the first electric buses to join CTS’s fleet of vehicles.

Thanks to its innovative design, Aptis offers an unparalleled passenger experience. Its berthing system for perfect alignment with the pavement, its low, completely flat floor and wide double doors allow easy movement and convenient boarding for people with reduced mobility and prams. Equipped with large bay windows along its entire length, Aptis offers 25% more glass surface area than a standard bus and a rear seating area with panoramic views of the city.

The vehicles requested by the city of Strasbourg are designed for slow charging at night at the depot. Aptis is also available for occasional recharging at the end of each line, using either ground-based charging solutions (SRS) or pantograph charging. Aptis was designed to have an optimised total cost. This is possible thanks to reduced maintenance and operating costs and a longer service life than that of standard buses. The aim for local authorities, therefore, is to have a total cost equivalent to that of existing standard diesel buses.

Aptis was also chosen by RATP and Île-de-France Mobilités, and by the areas of Greater Grenoble, Greater La Rochelle, and Greater Toulon, where commercial operations are due this year. As of September 2018, Aptis is also referenced by the CATP for public purchasing by local authorities. This referencing allows member authorities to order Aptis vehicles directly and simply from the CATP without having to embark on long and costly procedures.

Aptis also received the Origine France Garantie in January 2019. The certificate guarantees that at least 50% of Aptis’s value is French.

Design, production and testing will be carried out at Aptis Alstom’s site of Hangenbieten, in Alsace. Six other Alstom sites in France are involved in the design and manufacture of Aptis: Reichshoffen for the flanks, Saint-Ouen for the system integration, Tarbes for the traction, Ornans for the motors and Villeurbanne for the electronic components of the traction chain. Finally, Alstom’s site in Vitrolles is developing one of the charging solutions (SRS).

Alstom at ElekBu 2020

January 29, 2020 / WIL BALDWIN

Alstom presents its improved Aptis e-bus at ElekBu

28 January 2020 – Alstom will present its Aptis electric bus at ElekBu 2020, being held in Berlin from 4 to 5 February. After extensive testing in many French and European cities for the past two years, the serial design of Alstom’s innovative 100% electric mobility solution incorporates feedback from passengers and transport operators. Following test drives in major German cities such as Berlin, Hamburg and Munich, the serial 12 meters Aptis e-bus is to be shown at a roadshow in Germany this year.

The serial vehicles are based on an optimized global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers, with a capacity of 100 persons, while still offering them more fluidity thanks to large sliding doors.

In addition to the technical improvements, Aptis can also boast significant improvements to passenger comfort. A new air-conditioning system that (fully electrical heat-pump) maximises thermal comfort and the panoramic rear lounge has been enhanced to give a feeling of increased space. The new hydraulic suspension allows superior comfort and sound insulation, making Aptis one of the quietest and most innovative buses on the market. The high level of comfort is also reflected in the many very positive passenger surveys.

“Alstom is pleased to present the Aptis at ElekBu, which is so important for the German market. In the last two years, we have gained important experiences in trial operation. This 100% electric mobility solution offers a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Guillaume Legoupil, Sales Director Aptis.

Aptis is particularly popular in France, where it is also built. It has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. From February, the first series buses will be in regular service in Strasbourg.

Alstom Presents First Aptis Serial Vehicle at Busworld 2019

October 14, 2019 / WIL BALDWIN

14 October 2019 – Alstom will present the first serial vehicle of its Aptis electric bus at Busworld 2019, being held in Brussels from 17 to 23 October. After the four prototypes that have been on the roads of many French and European cities for the past two years, this new design incorporates feedback from passengers and transport operators.

This first serial vehicle is based on an optimised global architecture requiring fewer spare parts references and considerably facilitating maintenance operations. Thanks to a wheel steering angle of more than 40°, its ease of insertion increases significantly. The 15% reduction in the total weight of the vehicle, combined with the use of new, more efficient and state of the art batteries, substantially increases range. Aptis now accommodates more passengers while still offering them more fluidity thanks to large sliding doors.

“Alstom and its teams are very proud to be presenting the first series version of Aptis. This concentration of innovations perfectly represents what we always envisaged the production version of the 100% electric mobility solution would be. This clean, green bus, with its elegant design and optimised technical performance, will offer a new experience to passengers and drivers while meeting the new mobility challenges of urban areas,” underlines Benjamin Bailly, head of Alstom’s electric bus platform.

Aptis has already been chosen by Paris in the context of Europe’s largest call for tender for electric buses, as well as by the cities of Strasbourg, Grenoble, La Rochelle and Toulon. Upcoming milestones include ongoing tests in Spain with the ground-based recharge solution SRS and the training of hundreds of drivers in a new driving experience ahead of the first traffic releases, scheduled for the end of the year in Strasbourg.

Manufacturing and testing of Aptis will be carried out at Alstom’s two sites in Alsace. The Hangenbieten site oversees manufacturing of the end modules (driver’s cab and rear lounge). Manufacturing of the central passenger module, final assembly and tests will be carried out at the Reichshoffen site. This scheme will allow serial production from the end of 2019 onwards. Five other Alstom sites in France contribute to the design and manufacture of Aptis: Saint-Ouen for system integration, Tarbes for traction, Ornans for engines, Villeurbanne for electronic components of the traction chain.

In order to complete Alstom’s vison of road electromobility, exhibited alongside Aptis at Busworld will also be SRS, a completely safe, ground-level, conductive, static recharge system allowing the charging of buses along their route or within depots. As a ground-based solution, it eliminates the need for overhead infrastructure in cities, preserving the aesthetics of the urban landscape. In depots, SRS avoids the infrastructure costs associated with overhead charging systems. SRS for e-buses is based on Alstom’s SRS static recharge technology for trams, a proven solution already in operation in Nice, France. It is developed at Alstom’s Vitrolles site.

Alstom Delivers its First Series Electric Bus to Strasbourg

Alstom at ElekBu 2020

Alstom Presents First Aptis Serial Vehicle at Busworld 2019

Archives