Three Italian cities, Cagliari, Naples and Palermo have placed their trust in CAF to make resolute progress in their sustainable urban transport transformation initiatives. The CAF Group will supply electric buses to Cagliari in Sardinia, metro units to Naples and tram units to Palermo, the capital of Sicily. These contracts are testament to CAF’s strong value offer as a supplier of a wide range of zero-emission urban transport solutions. The total of the three aforementioned contracts amounts to a value of over 150 million euros.
Stadler and Azienda Transporti Milanesi S.p.A. (ATM) have signed another framework agreement for the supply of up to 50 TRAMLINK trams for the city of Milan. In a first call-off, ATM has ordered 14 high-capacity vehicles that will be financed with the PNRR (National Recovery and Resilience Plan) fund. The fourteen vehicles will be delivered before 30 June 2026.
The medium-capacity TRAMLINKs are similar to the tramways to be delivered under the framework agreement signed in 2020 and that Stadler is currently manufacturing. They have three modules and are about 25 m long. ATM has already ordered 60 out of the 80 vehicles covered by this framework agreement. The first unit arrived in Milan on 1 December 2022 and, currently, is performing tests on the city’s tram network.
The high-capacity version of the TRAMLINKs is based on the above but features five modules and a length of 35 m. They are bi-directional and have an attractive open interior equipped with two specific areas for wheelchair users. The barrier-free low floor and four doors per side allow passengers to board and alight easily and quickly thus reducing stopping time. In addition, the innovative bogies allow the trams to run smoothly in the narrow curves. This significantly reduces noise to the benefit of passengers and residents.
Particular attention has been paid to the safety of passengers, drivers and pedestrians. The ergonomically designed driver’s cab maximizes the driver’s visibility. Additionally, the TRAMLINK is equipped with an anti- collision device that can intervene when it detects a potential collision situation with pedestrians, cars or other obstacles. No blind spot cameras guarantee the security throughout the whole vehicle. The excellent dynamics as well as the high levels of safety and comfort improve the travel experience.
Bengaluru, India, 4 July 2023 – Alstom (OTC: ALSMY) , global leader in smart and sustainable mobility, launches its flagship Young Engineering Graduate Program (YEGP) 2023 with a target to onboard 700 young graduate engineers in India over the next two months. This is the highest ever intake under this initiative in the country. YEGP is a key element of Alstom’s India hiring strategy since 2015, aimed at developing young engineers talent for Indian and global business needs. Out of 700 hires, 58% are women engineers in line with the company’s gender diversity focus. Further, the campus hiring has been done from 54 universities across 26 states ranging from several Northeastern states to Gujarat and from Jammu & Kashmir to Kerala in tandem with Alstom’s regional diversity promise. There is a 2x increase vis-à-vis 30 hires from the last year (2022) from the North-eastern states alone.
The 14 days program focuses on providing an immersive and engaging experience to all the YEGs, while helping them get a better understanding of Alstom’s business, operations and functions through close interactions with the leadership team. The candidates are being onboarded as Graduate Engineer Trainees & Post Graduate Trainees will be enabled through structured induction, technical, functional and on the job trainings. They will be taking up roles such as, Application Engineers, Train Control Engineer, Train Design Engineer, Testing & Commissioning Engineer etc. and will be working across Alstom’s six manufacturing facilities and four engineering centers catering to domestic and international markets.
Since its inception, more than 1800 engineering graduates have been recruited under this program in partnership with leading technical/engineering colleges and universities across India. In terms of engineering disciplines, the hires come with engineering specializations in Mechanical, Electrical, Electronics, Instrumentation, Computer Science, Industrial, Mechatronics, etc.
Alstom has also retained its place as the first and only organisation in India to be certified as a Top Employer in the mobility sector consecutively for the third time this year. This is a testament to Alstom’s continued commitment towards creating a better workplace through excellent people practices. To ensure the integration and development of its young recruits, the company counts on a strong internal learning culture. Alstom India is leading globally in terms of learning hours. Through Alstom University, an online learning management system, employees can learn about various subjects for their desired roles at their own pace.
In October of 2021, Stadler was awarded the contract for 286 single-deck multiple units. The Federal Administrative Court confirms the award of the contract to Stadler, and has dismissed Alstom’s appeal.
Together with its subsidiaries Thurbo and RegionAlps, SBB is procuring 286 single-deck multiple-unit trains for regional transport. Stadler was awarded the contract for this order. The unsuccessful bidder, Alstom, appealed against this decision to the Federal Administrative Court. The court has now dismissed the appeal. This court decision confirms that SBB complied with the requirements of procurement law and the equal treatment of bidders during the tendering procedure. After signing the contract, Stadler can start building the 286 multiple units for regional transport.
The legal proceedings initiated by Alstom have an impact on the delivery of the vehicles. The first trains will now not enter service until 2026 instead of December 2025 as originally planned. The new trains will gradually replace the following rolling stock until 2034:
at SBB: Domino, Flirt (first generation)
at Thurbo: articulated railcars
at RegionAlps: Domino and Nina
The newly procured vehicles will help all three railway companies to implement their planned improvements to services as well as the service expansion projects planned by the Confederation and the Cantons.
February 18, 2022 – Alstom (OTC: ALSMY) Chinese joint venture, Shentong Bombardier (Shanghai) Rail Transit Vehicle Maintenance Co., Ltd., has been awarded a contract from Shanghai Shentong Metro Group Co., Ltd. (Shanghai Metro) to provide whole lifecycle maintenance service for 204 Movia metro cars (34 trains) on Shanghai’s Line 12 phase 2 and phase 3 project. The total contract is valued at approximately €43.6 million (330 million CNY excl. VAT).
Under the contract, SHBRT will adopt the condition-based maintenance regime by deploying the advanced maintenance tools, including Alstom’s Orbita advanced train monitoring system, Automatic Vehicle Inspection System, etc., to improve the safety, reliability, availability and efficiency of Shanghai’s Line 12 fleet. The scope of the contract includes preventive maintenance, corrective maintenance, balanced overhauls, safety inspections, train cleaning and train escort services for 204 metro cars. The project is expected to be completed in November 2027.
Stadler has been awarded the largest contract in the company’s history with a total volume of up to four billion euros: it has won an international tender held jointly by six transport companies fromGermany and Austria for up to 504 vehicles as part of the VDV Tram-Train project. In addition to vehicle production, the framework agreement also includes a maintenance contract lasting up to 32 years. Part of the framework agreement is a fixed order quantity of 246 CITYLINK vehicles representing a volume of around 1.7 billion euros. There is also an option to order up to 258 more vehicles.
The award of the contract marks the beginning of a long-standing partnership between Stadler and the project consortium, consisting of Verkehrsbetriebe Karlsruhe (VBK), Albtal-Verkehrs-Gesellschaft (AVG), Saarbahn Netz, Schiene Oberösterreich, the State of Salzburg and Zweckverband Regional-Stadtbahn Neckar-Alb. Over the next ten years, Stadler will produce 246 CITYLINK vehicles for the six operators. The first four vehicles will be delivered to the Saarbahn in 2024.
All vehicles will be supplied in a three-part design. The length of the vehicles, the number of doors, the boarding and coupling height as well as the configuration of the CITYLINK versions will vary depending on the delivery location and the customer. All the vehicles will have certain features in common: they will be fitted with an HVAC system for the passenger compartments and driver’s cab, and have spacious multi-purpose areas with two wheelchair spaces that can be flexibly configured. The tram-trains will be individually equipped to suit the place of use. For example, the vehicles for the Albtal-Verkehrs-Gesellschaft will have a toilet as well as facilities for cycle racks, while Schiene Oberösterreich has opted for luggage racks as an extra feature.
Providing one type of vehicle for six operators is unusual. “On the project team, we spent hours developing a common set of specifications. We defined a standard with up to five further versions to meet the operator- specific requirements such as boarding height, coating and place of use,” explains the overall project manager Thorsten Erlenkötter from Verkehrsbetriebe Karlsruhe.
The three unit FLIRT Akku used for the record journey has been developed by Stadler since 2016 as a local CO2 neutral mobility solution for the climate-friendly operation of unelectrified railway routes. The vehicle was approved by the German Federal Railway Office and introduced to the public for the very first time in 2018. Ever since when the FLIRT Akku test carrier has travelled around 15,000 kilometers in battery only operation, before setting the world record for a regional train journey in battery-only mode without additional charge now.
Climate friendly bestseller FLIRT
The first Fast Light Intercity and Regional Train was developed in 2002 at the request of the Swiss Federal Railways SBB for the Zug city railway. Ever since the unit was put into service, the FLIRT has turned into an international bestseller with over 2,000 vehicles sold. These vehicles are being operated in 20 countries in virtually all climate zones, from the equator to the polar circle, with 528 of them operating in Germany alone. The single-decker regional and intercity multiple unit convinces with its flexibility in the process. The trains are configured for normal and broad gauge tracks, with top speeds of 160 to 200 km/h. Thus, the FLIRT can be customized to any individual client requirements in terms of its drive technology, number of seats, passenger flow and interior design. The lightweight aluminum construction and common components help to keep the operating, energy and maintenance costs low. Besides electric, diesel or bi-modal drives, the FLIRT is also available with climate-friendly battery and hydrogen propulsion.
With the FLIRT Akku train sets, Stadler has developed a so called BEMU (battery-electric multiple unit) that will run as both a classic EMU (electric multiple unit) under overhead contact cable or battery-operated on un-electrified routes. This makes it optimal for partly electrified routes that currently still need to be served with diesel trains. Stadler had already won the first green technology tender in Germany and sold 55 FLIRT Akkus to NAH.SH, the Schleswig-Holstein Local Transport Association in 2019. In November 2021, another order for 44 vehicles followed from Deutsche Bahn Regio. In addition Stadler is also building the first hydrogen-powered FLIRT for the San Bernardino County Transportation Authority (SBCTA) in the USA.
Alstom and S-Bahn Hamburg GmbH have signed a contract for the delivery of an additional 64 Class 490 S-Bahn trains. The order is an option from a framework contract signed in 2013 and is valued at around 500 million euro.
As with the previous trains, passengers will enjoy the proven amenities of these three-car electric multiple units, but with the addition of some new improvements to better meet the needs of Hamburg’s passengers. For example, the new S-Bahn train’s middle cars will feature a multipurpose area with room for bicycles, luggage, and dedicated spaces to accommodate passengers with limited mobility.
However, the train’s most significant innovation will be invisible to passengers. For the first time in Germany, S-Bahn trains will be equipped with the European Train Control System (ETCS) Baseline 3 Release 2 and automated train operation (ATO) technology. Together, these technologies will ensure denser and more frequent service and enable Hamburg to provide more fluid transport while increasing the overall number of train journeys. In addition, the flexibility of Hamburg’s new S-Bahn trains means that they will couple with the 82 Class 490 S-Bahn trains already in service.
Photo of main Hamberg train station from author’s visit in 2016.
This order marks Germany’s first implementation of ATO in automation level 2 (GoA 2) for new S-Bahn vehicles. In addition, S-Bahn Hamburg GmbH will receive vehicles that already comply with the latest state-of-the-art signalling technology. The trains will be delivered with Alstom’s intelligent onboard technology for ETCS, with integrated ATO software that meets the high demands of future digital rail operations in terms of performance, availability, and automation.
Initially, Alstom will manufacture three vehicles that will undergo extensive testing and inspection, in particular for approval of their ETCS and ATO functionalities. Vehicle deliveries to Hamburg are scheduled for 2025 and 2026.
Among others, Alstom’s sites in Hennigsdorf, Bautzen (production), Berlin (signalling), Braunschweig, Siegen and Mannheim, Germany, will be involved in the production of the new S-Bahn trains. This is in addition to sites in Charleroi, Belgium (ETCS), Wroclaw, Poland, Västeras, Sweden and Vadodara, India, which will also participate in production.
In Germany, Alstom offers innovative solutions for sustainable mobility and is one of the leading suppliers of railway technology with metros, suburban trains, trams, regional trains, locomotives and signalling solutions. Our trains travel from Schleswig-Holstein to Bavaria. More than 70% of high-speed trains running in Germany are equipped with Alstom’s ETCS signalling solutions. In Lower Saxony, Alstom is building the world’s first fuel cell-powered, completely emission-free Cordia iLint regional train in series production. Alstom is Germany’s only manufacturer of infrastructure, signalling and digital mobility solutions to provide maintenance, service and modernisation of all mass transit trains for all manufacturers’ series, as well as information systems.
Alstom’s first two Innovia 300 monorail trains for the Cairo Monorail project have arrived in Cairo after being completed at Alstom’s Derby UK factory, with propulsion systems application led by Alstom’s site in Trapaga, Spain. The dispatch of the first 8 fully automated, driverless cars out of 70 trains (a total of 280 cars) is a major milestone in the Cairo Monorail project, Egypt’s first two monorail lines, linking the New Capital City and 6th October City to Greater Cairo.
In August 2019, an Alstom-led consortium composed of Orascom Construction and Arab Contractors signed a €2.7bn contract to design, implement, operate, and maintain the two lines. The project includes a 54 km line connecting the New Administrative City with East Cairo and a second 42 km line connecting 6th of October City with Giza.
Both lines are expected to open in 2023. After the construction phase is completed, the Alstom-led consortium will provide 30 years of operation and maintenance (O&M) services for both lines.
Egypt is committed to developing and improving mobility services for its citizens, while reducing traffic congestion and environmental impact. The Innovia 300 monorail system allows fast construction of high-capacity lines at lower costs. Once maximum capacity is achieved, each of the two Cairo lines will be able to transport 45,000 passengers per hour in each direction. The Innovia 300 monorail system is equipped with Alstom’s proven Cityflo 650 communications-based train control solution. Benefits of this flagship technology include high reliability, flexible operation, shorter headways between trains, improved safety and reduced maintenance costs. The Alstom Mitrac propulsion system provides strong reliability and maintainability, and thanks to its permanent magnet motor, better energy consumption figures.
Alstom has been a partner to Egypt’s railways since 1971, continuously supporting the railway infrastructure development in the country. Over these years, Alstom Egypt has established a local talent pool and Center of Excellence (COE) related to signalling systems, power supply and maintenance workshops to support projects across its Africa-Middle East-Central Asia (AMECA) region. It is this rich heritage that has enabled Alstom to make a significant contribution to Egypt’s rail industry development. Today, Alstom employs approximately 500 people in Egypt with ongoing projects which includes the modernization of signalling system on the Beni Sueif – Assyut line.
Watch the Video of First two Alstom Innovia 300 Trains Delivered for Cairo Monorail!
Santo Domingo, August 23, 2021– Alstom will manufacture, supply and commission eight (8) new three-car Metropolis trainsets for Line 1 of the Santo Domingo Metro serving the capital of the Dominican Republic. The international public tender, managed by the Oficina Para el Reordenamiento del Transporte (OPRET), and financed by the Agence française de développement, is a priority project for infrastructure development in Santo Domingo and to increase the transportation capacity of the country’s capital city.
Line 1 of the Santo Domingo metro, conceived to improve mobility in the north-centre-south city corridor, serves 16 stations across 14.5 kilometres. The new trains that Alstom is supplying will be able to operate in multiple units, coupled with each other or with the trains of the fleet previously acquired by OPRET, allowing capacity to be adapted to demand: 6-car configurations at peak times and 3-car configurations at off-peak times.
The new trains will have the same features, functionalities and characteristics of the Metropolis trains that currently operate in the Santo Domingo Metro, such as wide doors, wide corridors and a low floor for an optimal flow of passengers. In addition, the new trainsets will have additional features and technological improvements to enhance the passenger experience and optimize operations and availability, including LED lighting in the passenger area, Wi-Fi connection for the uploading of multimedia files and data transmission to the control unit, as well as improvements in the passenger information and alert system, train control and self-diagnosis systems.
The new trains will be manufactured at Alstom’s plant in Santa Perpetua, Barcelona, Spain, and the first two trains will arrive at the port of Santo Domingo approximately 18 months from the signing of the contract. These new trains will join the 25 Metropolis trains that Alstom previously supplied to Santo Domingo Metro for Line 1 and the 21 Metropolis trains supplied for Line2, since 2009, for a total of 138 cars.
Globally, more than 6,000 Metropolis cars have been sold across the globe, including to cities such as Barcelona, Amsterdam, Mumbai, Chennai, Montreal, Singapore, Buenos Aires, Lima and Santiago de Chile.
