Tag: Sweden (Page 1 of 4)

Solaris wins new hydrogen bus contracts in Barcelona and Essen

February 2, 2024 / WIL BALDWIN

The CAF Group company has consolidated its leading position in the thriving hydrogen city bus market with two new contracts for the supply of 57 vehicles for a combined value of over 40 million Euros for Barcelona, Spain and Essen, Germany. Solaris’ experience in rolling out hydrogen technology has seen 40 operators in 10 European countries already place their trust in the company, having won orders for in excess of 700 vehicles.

Supported by the ongoing development of the hydrogen vehicle market and the increasing orders for hydrogen fuel cell-powered buses, Solaris has intensified its business activity in this segment over the recent months. In fact, in connection with this technology, last year Solaris made a major investment constructing a new building exclusively to manufacture hydrogen-powered buses.

Solaris’ substantial backlog, which includes supplies to various operators in Austria, Switzerland, Germany, Spain, France, Italy, the Netherlands, Poland, Sweden and Slovakia, illustrates the current relevance of this market. While 99 hydrogen buses were registered in Europe in 2022, pending official data for 2023, at the end of the third quarter of the year a total of 137 new bus registrations had already been made in Europe, representing a 38% increase compared to the 12 months in the previous year. If we add the data for the last 3 months of 2023, the figures would undoubtedly reveal how strongly this sector has grown and how much Solaris has contributed to this situation. Just a few years ago, specifically in 2018, not one single hydrogen bus was registered in Europe.

Saab unveils first airborne surveillance system for Poland

October 1, 2023 / WIL BALDWIN

Saab AB (Stockholm: SAABb) has presented the first Saab 340 Airborne Early Warning (AEW) aircraft to the customer during a ceremony in Linköping. The event took place in Linköping on 29 September, just two months after Poland placed an order for two AEW aircraft.

Guests from Sweden and Poland attended the event, which marked a milestone towards the rapidly proceeding delivery to Poland of the Saab 340 AEW equipped with the Erieye radar. The solution will provide Poland’s Armed Forces with a national asset to reinforce territorial integrity and national security.

The fast pace is a result of the efficient collaboration between Saab and the Polish Armed Forces and the fact that Saab has an ongoing production line for airborne early warning solutions. This includes dedicated personnel and in-house expertise to perform all kinds of tests and evaluations for the necessary approval of the systems.

Saab offers four Expeditionary Submarines to the Netherlands

July 28, 2023 / WIL BALDWIN

July 28, 2023 – Supported by Sweden and the United Kingdom, Saab (OTC: SAABF) has today submitted its proposal for the replacement of Netherland’s current submarines. The proposal comprises four advanced Expeditionary Submarines with the latest innovations and technologies and includes a cooperation with Dutch shipbuilder Damen Shipyards Group.

Saab’s offered solution is based on a successful, proven and future-proof design. It will incorporate the latest capabilities and technologies, whilst its truly modular design will allow for new technologies as they evolve to ensure relevance for many years to come.

Saab and Dutch shipbuilder Damen Shipyards Group have cooperated since 2015 and the offer to build submarines to replace the Dutch Walrus-class is a balanced cooperation between the Netherlands and Sweden.

The C718 is an advanced Expeditionary Submarine that offers an unsurpassed level of endurance and exceeds the Royal Netherlands Navy needs for long-distance operations, sufficient accommodation, crew comfort and increased weapon payload capability.

Sweden, through Saab’s business area Kockums, has a long tradition in producing world class submarines. Four nations are currently operating submarines and submarine technology designed by Saab’s business area Kockums; Sweden, Australia, Japan and Singapore.

Saab receives order for Carl-Gustaf M4 from Australia

July 4, 2023 / WIL BALDWIN

Saab (OTC: SAABF) has received an order from the Australian Department of Defence for the supply of additional Carl-Gustaf® M4 weapons. The order value is SEK 400 million with deliveries during 2024-2025.

The Carl-Gustaf M4 weapons will be delivered with Saab’s new Fire Control Device, FCD 558.

Proven to deliver results on the battlefield, Carl-Gustaf provides the effectiveness soldiers need. The wide range of ammunition types for Carl-Gustaf makes it flexible and able to handle any situation, whether it is to destroy an armoured vehicle or structure, or illuminating the battlefield during night operations.

The Carl-Gustaf system is supplied to more than 40 countries around the world.

Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations.

Saab’s Fourth GlobalEye Conducted Successful First Flight

April 3, 2023 / WIL BALDWIN

The first flight of the fourth GlobalEye is an important milestone in Saab’s Airborne Early Warning & Control (AEW&C) program and highlights that Saab can rapidly and reliably deliver GlobalEye.

The Saab (OTC: SAABF) aircraft took to the skies from Saab’s airfield in Linköping, Sweden on April 03, 2023 and performed several tests related to the aircraft’s capabilities.

GlobalEye is the most modern multi-domain Airborne Early Warning & Control (AEW&C) solution with an array of active and passive sensors that provide long-range detection and identification of objects in air, at sea and over land.

By providing real-time information to units in air forces, armies and navies, GlobalEye enables enhanced situational awareness of the surrounding areas and early detection of threats. It can also be used for non-military tasks such as leading and coordinating rescue missions during natural disasters or larger accidents at sea or on land.

Heart Aerospace Selects Garmin G3000 Flight Deck for First All-Electric Airliner

December 14, 2021 / WIL BALDWIN

OLATHE, Kansas/Business Wire – Garmin^® International, Inc., a unit of Garmin Ltd. (NYSE: GRMN), has announced a long-term agreement with Heart Aerospace to provide the state-of-the-art Garmin G3000^®integrated flight deck for the ES-19 electric airliner. Heart Aerospace is working to develop the new ES-19, a 19-seat electric airliner that has the potential to provide the regional air transport market with a more sustainable and environmentally friendly aircraft option as early as 2026. Additionally, United Airlines has conditionally agreed to purchase 100 ES-19 aircraft once the aircraft meets United’s safety, business and operating requirements.

The modular Garmin G3000 integrated flight deck boasts lightweight and vibrant high-resolution flight displays that support navigation, communication and flight sensor solutions and integrates seamlessly into the ES-19 aircraft systems. Specifically tailored to meet the needs of electric aircraft, the G3000 system that will be featured in Heart Aerospace’s ES-19 delivers enhanced capabilities to optimize the aircraft’s electric drive train and battery management systems. The G3000 is architected to provide the ability to efficiently facilitate future system upgrades as the electric aircraft industry continues to evolve.

Heart Aerospace is an electric airplane company headquartered in Gothenburg, Sweden, developing the ES-19, a nineteen-passenger regional aircraft driven entirely by batteries and electric motors. The first ES-19 is scheduled to enter into service by 2026. The first-generation aircraft will have a maximum range of up to 250 miles using lithium-ion batteries. The ES-19 will have zero operational emissions and offer significantly lower operating costs compared to similar sized gas-turbine aircraft. The ES-19 aircraft will also be quieter than its turboprop counterparts, with less vibration and noise, making it ideal for the development of short-range regional air travel.

Alaska Airlines is the 14th member of the oneworld alliance.

Alaska Airlines Expands oneworld Partnership with New West Coast International Flights

December 13, 2021 / WIL BALDWIN

SEATTLE, December 13, 2021 /PRNewswire/ – Ready to start planning that long-awaited, much-deserved vacation or trip to Europe and destinations beyond? Alaska Airlines and our fellow oneworld member airlines – including American Airlines, British Airways, Finnair and Iberia – are ready to take you there this summer with new nonstop international flights from our West Coast hubs and airports.

British Airways announced today it will begin nonstop service from Portland to London Heathrow five days a week starting on June 3, 2022. The flight becomes the sixth British Airways service to London from a key Alaska market on the West Coast joining Los Angeles; San Diego; San Francisco; San Jose, California; and Seattle.

Finnair announced last week its new nonstop flight between Seattle and Helsinki that’s scheduled for service three days a week beginning June 1. Finnair’s nonstop to Seattle joins its existing service to the Finnish capital from Los Angeles. Finnair will also increase its Los Angeles-Stockholm service to four nonstop flights a week beginning May 1.

By summer 2022, Alaska’s oneworld partners will offer more than 100 nonstop flights every week from the West Coast to Europe including nonstop service to London, Madrid, Barcelona, Stockholm and Helsinki. Once in Europe, journeys can continue throughout the Continent and other parts of the world with convenient connections through our partners’ hubs.

oneworld flights between the U.S. West Coast and Europe for summer 2022:

Alstom to Provide Additional 64 Commuter Trains to Hamburg, Germany

September 12, 2021 / WIL BALDWIN

Alstom and S-Bahn Hamburg GmbH have signed a contract for the delivery of an additional 64 Class 490 S-Bahn trains. The order is an option from a framework contract signed in 2013 and is valued at around 500 million euro.

As with the previous trains, passengers will enjoy the proven amenities of these three-car electric multiple units, but with the addition of some new improvements to better meet the needs of Hamburg’s passengers. For example, the new S-Bahn train’s middle cars will feature a multipurpose area with room for bicycles, luggage, and dedicated spaces to accommodate passengers with limited mobility.

However, the train’s most significant innovation will be invisible to passengers. For the first time in Germany, S-Bahn trains will be equipped with the European Train Control System (ETCS) Baseline 3 Release 2 and automated train operation (ATO) technology. Together, these technologies will ensure denser and more frequent service and enable Hamburg to provide more fluid transport while increasing the overall number of train journeys. In addition, the flexibility of Hamburg’s new S-Bahn trains means that they will couple with the 82 Class 490 S-Bahn trains already in service.

Photo of main Hamberg train station from author’s visit in 2016.

This order marks Germany’s first implementation of ATO in automation level 2 (GoA 2) for new S-Bahn vehicles. In addition, S-Bahn Hamburg GmbH will receive vehicles that already comply with the latest state-of-the-art signalling technology. The trains will be delivered with Alstom’s intelligent onboard technology for ETCS, with integrated ATO software that meets the high demands of future digital rail operations in terms of performance, availability, and automation.

Initially, Alstom will manufacture three vehicles that will undergo extensive testing and inspection, in particular for approval of their ETCS and ATO functionalities. Vehicle deliveries to Hamburg are scheduled for 2025 and 2026.

Among others, Alstom’s sites in Hennigsdorf, Bautzen (production), Berlin (signalling), Braunschweig, Siegen and Mannheim, Germany, will be involved in the production of the new S-Bahn trains. This is in addition to sites in Charleroi, Belgium (ETCS), Wroclaw, Poland, Västeras, Sweden and Vadodara, India, which will also participate in production.

In Germany, Alstom offers innovative solutions for sustainable mobility and is one of the leading suppliers of railway technology with metros, suburban trains, trams, regional trains, locomotives and signalling solutions. Our trains travel from Schleswig-Holstein to Bavaria. More than 70% of high-speed trains running in Germany are equipped with Alstom’s ETCS signalling solutions. In Lower Saxony, Alstom is building the world’s first fuel cell-powered, completely emission-free Cordia iLint regional train in series production. Alstom is Germany’s only manufacturer of infrastructure, signalling and digital mobility solutions to provide maintenance, service and modernisation of all mass transit trains for all manufacturers’ series, as well as information systems.

Saab Digital Towers Selected by Belgium

September 1, 2021 / WIL BALDWIN

The agreement calls for a phased introduction of Saab (OTC: SAABF) Digital Towers for up to six airports and three centres in Belgium. The framework agreement has a fixed part and a conditional part for a total value of just over 48 million Euro, spread over 18 years. The first phase will cover the airports of Liege and Charleroi and a centre in Namur. Delivery to skeyes will start in 2022, with initial operations to be started in 2024. Aviation is an integrated part of the infrastructure in Belgium, and the Digital Tower programme is a forward looking and innovative way of providing a sustainable service for many years to come, as well as a potential role model for Europe.

SDATS’s digital air traffic control solution is a breakthrough in air traffic control and was introduced during 2015 in Sweden, and has been followed up by others including at Cranfield, London City Airport, in Stockholm with a new Digital Tower centre, and later in 2022 by a Digital Tower centre at Schiphol.

skeyes is a leading and an innovating Air Navigation Service Provider. Saab Digital Air Traffic Solutions AB was formed 2016 as a joint venture between Saab and the Swedish Air Navigation Service Provider (LFV). By combining LFV’s unique operational experience with Saab’s world-class technical solutions, Saab Digital Air Traffic Solutions can manage the entire process from planning and implementation to the administration of air traffic control services. As a provider of both the technology and air traffic control services, the company offers new and sophisticated digital services to airports in Sweden and abroad.

Mitsubishi Heavy Industries to Expand Metal 3D Printing Services

July 10, 2021 / WIL BALDWIN

Mitsubishi Heavy Industries Machine Tool Co., Ltd., a group company of Mitsubishi Heavy Industries, Ltd. (MHI) based in Ritto, Shiga Prefecture, will offer expanded services in metal 3D　printing services commencing on July 15, including prototype production and contract production by metal 3D (three-dimensional) printers applying laser-based Metal Additive Manufacturing (AM) technologies. In addition to its previously offered Directed Energy Deposition (DED) type metal 3D printers for large-scale parts, the Company will newly add services using binder jetting (BJT) metal 3D printers for small-scale parts. The expanded service lineup will enable manufacture of a full range of metal parts, from small components of 1mm size to ultra-large-scale parts exceeding 1 meter.

The addition to MHI Machine Tool’s lineup is the DMP2500 metal 3D printer developed by Digital Metal, a group company of Hogänäs of Sweden. The DMP2500’s BJT technology not only enables extremely precise manufacturing but also is engineered especially for high-volume production. Currently, MHI Machine Tool has provided metal printing services applying unique DED technology of “LAMDA” AM systems; now, with the introduction of a different type of printer, the Company can respond to a broad range of metal 3D print needs and propose and provide the optimal manufacturing method and equipment for each parts.

MHI Machine Tool concluded a contract with Digital Metal in July 2020 on marketing its DMP2500 and other metal 3D printers in Japan. By adding these BJT type systems to its own sales lineup, MHI Machine Tool will be in a position to offer a broad portfolio of not only sales but also after-sales services.

While metal 3D printers are receiving attention for their innovative advances to production processes, they also present challenges relating to the difficulty of their production and quality assurance, etc. With the new expansion of services, MHI Machine Tool will focus on providing solutions relating to additive manufacturing, including provision of related expertise, to accelerate early adaptation to production parts.

Going forward, MHI Machine Tool will develop its metal printing services structure spanning from small-scale high-precision to ultra-large-scale items, enabling the Company to respond to a broad wide-range of prototype production needs and contract production. In these ways, MHI Machine Tool will encourage manufacturers to expand into manufacturing parts using metal 3D printers and contribute to the industrial supply chain as a whole.

Archives